Boosted Performance V 2.0 turbo list

jwick

If you figure out the nut size, let me know cuz I want to pick up a socket in that size.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Spec Jay

I'm thinking it's 1" or 26mm I had a 24mm handy and it didn't fit. Maybe Sasha can mic one out for us or if it comes down to it I'll pop my filter and mic it.

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay

jwick

Roger that. I would have miced it myself if I hadn't been dead tired after a weekends worth of work. I'm also 3,000miles or 6 months from the oil filter being removed.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

YzGyz

I also had a hardtime tightening that big nut for the oil cooler adapter plate. I had to take the nut and run to HF and match it to one that fit. The only one that fit well at HF is a 1'' one from the socket set # 69560


As for the oil line, I had cut a chunk off the plastic corner on the bottom left side to allow the oil lines to reach.



(don't mind the blocks and the 2x8 under the tires. They are extra and have very little weight on them. The weight of the car is on the floor jacks.)

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

Spec Jay

^ awesome, Repped

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay

Boosted Performance

1" combination wrench works best for me. I'll z check out this oil line business this Saturday. I am doing a full install starting Saturday morning.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Spec Jay

Oil line business?

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay

Spec Jay

What boost controller is everyone running? and how do you have your vaccum/boost lines run.

I have a Turbosmart E-boost Street 40, the install instructions don't give anything about a twin scroll setup. I was thinking about using the single port/single solenoid/twin turbo instructions which is
Single port, single solenoid, twin turbo connection Method
(For straight configuration twin parallel turbocharger engines E.g. RB26DETT)
 Port 1 of solenoid vent to atmosphere
 Port 2 of solenoid tee to bottom port of wastegates
 Port 3 of solenoid to Pressure only source

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay

Boosted Performance

The new oil lines I am using...just to make sure everything fits as intended.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

jwick

I did notice that you when to crimped ends

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick

I have the GReddy Profec. It works similarly but there is no vent on the solenoid valve. I'm somewhat familiar with the Turbosmart EBC and what you have described is how I would handle the vacuum lines. As for how I ran mine. I tapped the intake manifold for a second barb (4mm) so I wouldn't have to branch off the charge pipe or BOV line and then transition form 6mm to 4mm for the one that goes to the EBC box itself. The line that goes thru the solenoid and to the top of the WG, I teed off the charge pipe line going to the bottom ports of the WGs.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Spec Jay

Cool, sounds good. my tuner usually only messes with HKS or GReddy EBCs so hes unfamiliar with the Turbosmart.

I was talking wit RT Tuning, the base map I was sent was meant for the V1 kits with the 2.75 MAF pipes and not the 3" from the 1.5 and 2. I noticed my AFR was sitting anywhere from 14.7 to 16 at idle and in boost was 12.3 after checking for leaks so its too lean for comfort to be in boost so monitor your AFR.

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay

Boosted Performance

Oil lines:

One hoes goes on the driver side, and the other goes on the passenger side...they are plenty long:





Crossover IC pipe:





About even with the front sub frame and rear skid plate (sagging in the picture a bit because it is just the one couple and the pipe)


Motordyne exhaust:





6870 T4 1.32 a/r, fits with room to spare:










I am really excited about the 6870 turbo. I was worried that it will be too large, but it is not...basically the same outside dimensions as the 6766, but with much higher ceiling.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

instroke

As most guys are running the FI exhaust, any idea's on how this Motordyne will sound with the V2 kit?

Spec Jay

Looks like I need to trim my coupler to the turbo outlet more.

__________________
09 Monterey Blue Global Time Attack Street Class Build
Build Thread:Saber! Instagram:@SpecJay