Boosted Performance V 2.0 turbo list

jwick · 12-11-2014, 06:46 PM

Quote:

Originally Posted by Cell

My tuner tuned it out. I don't have that problem.

Who's your tuner?

Chuck33079 · 12-11-2014, 06:50 PM

Quote:

Originally Posted by paratrooper

That's the other issue.. Here in Indiana i can't seem to find a tuner close so even after install I'll have to rely on the supplied map until I can get time to trailer it to a tuner.

The base map is fine to drive on. You won't need to trailer it anywhere.

jwick · 12-11-2014, 07:06 PM

Quote:

Originally Posted by Chuck33079

The base map is fine to drive on. You won't need to trailer it anywhere.

Agreed. Just run WG pressure and don't install a boost control until you go get it tuned

paratrooper · 12-11-2014, 07:39 PM

Quote:

Originally Posted by jwick

Agreed. Just run WG pressure and don't install a boost control until you go get it tuned

I'm really just thinking I only want to run mild boost anyway so shouldn't be an issue

Chuck33079 · 12-11-2014, 07:42 PM

Quote:

Originally Posted by paratrooper

I'm really just thinking I only want to run mild boost anyway so shouldn't be an issue

Famous last words. Boost is an addictive.

TopgunZ · 12-11-2014, 08:06 PM

Quote:

Originally Posted by Chuck33079

Famous last words. Boost is an addictive.

Hahaha. No doubt! Its like red bull to tyrone biggums.

12-11-2014, 08:59 PM

Hahaha

Cell · 12-11-2014, 09:59 PM

Quote:

Originally Posted by jwick

Who's your tuner?

Eli at Project X Customs.

barretp · 12-12-2014, 02:05 AM

Quote:

Originally Posted by jwick

As an aside. Mine is installed and up and running. You are more welcome to ask me any specific questions or I'd be willing to let you check out the car. it's currently at the shop for the V1.5 piping retune but I should have it back next week.

Thanks man. I followed your build and I was super impressed with your install. I'll definitely be doing more research. My only concerns are is I'm not the most mechanically inclined when it comes to cars and this is the only car I have, so I'd need to do the install all in one sitting.

YzGyz · 12-12-2014, 02:45 AM

All I know is that I have read the BP 1 tread like 2.5x. The kit is just ingenious. I then waited and waited for Shasha to build the kit again. I was finally able to save the $$ for the kit but I missed the opportunity for the 2nd batch. A few months later v2 came out and I jumped on it. All I'm going to say is that Shasha is building this kit now and has some kits with no name on them. If you miss this round, you might have to wait a long time.

I'm thinking of doing a simple recoding of the install when I start wrenching. If it's as easy as everyone says it is (i think it is), the video will be simple.

I'm going to install different parts in different stages and times. I plan to do the trans and diff together. Next install is the turbo kit, then the Rad once it gets hotter.

YzGyz

jwick · 12-12-2014, 07:04 AM

Quote:

Originally Posted by YzGyz

All I know is that I have read the BP 1 tread like 2.5x. The kit is just ingenious. I then waited and waited for Shasha to build the kit again. I was finally able to save the $$ for the kit but I missed the opportunity for the 2nd batch. A few months later v2 came out and I jumped on it. All I'm going to say is that Shasha is building this kit now and has some kits with no name on them. If you miss this round, you might have to wait a long time.

I'm thinking of doing a simple recoding of the install when I start wrenching. If it's as easy as everyone says it is (i think it is), the video will be simple.

I'm going to install different parts in different stages and times. I plan to do the trans and diff together. Next install is the turbo kit, then the Rad once it gets hotter.

YzGyz

You need to do the radiator before or at the same time with the turbo install. You do not want to have to pull all your Ic piping, intercooler and oil cooler just to get to the radiator. It'll never be easier than when its stock. Plus you have to evacuate the AC so doing that when its cooler is wise since you could run around a few days with having it recharged.

YzGyz · 12-12-2014, 07:36 AM

Quote:

Originally Posted by jwick

You need to do the radiator before or at the same time with the turbo install. You do not want to have to pull all your Ic piping, intercooler and oil cooler just to get to the radiator. It'll never be easier than when its stock. Plus you have to evacuate the AC so doing that when its cooler is wise since you could run around a few days with having it recharged.

I was planning to do it before but was going to see what temps I get prior to the CSF. I'm doing everything myself so I'm not worried about any shop labor.

I totally forgot about the oil cooler though. DOH!.. That can be a little messy. We will see.

Jwick, don't you sleep man?

YzGyz

jwick · 12-12-2014, 07:47 AM

Quote:

Originally Posted by Cell

Eli at Project X Customs.

Never heard of him.

Just out of curiosity, did you have the described hiccup on the base map?

jwick · 12-12-2014, 07:49 AM

Quote:

Originally Posted by YzGyz

I was planning to do it before but was going to see what temps I get prior to the CSF. I'm doing everything myself so I'm not worried about any shop labor.

I totally forgot about the oil cooler though. DOH!.. That can be a little messy. We will see.

Jwick, don't you sleep man?

YzGyz

Trust me you don't want to pull the intercooler if you don't have too. You definitely don't want to have to remove the oil cooler later one. You have a Z in Houston were temperature are above 90deg half the year. You need the radiator upgrade. Just add it to the list pre-turbo. Chuck and I did it in the garage and it took a little more than half a day. Much less if I had know the heat gun trick for the silicon hoses.

I sleep but my body has typically only needed about 6hrs a night.

paratrooper · 12-12-2014, 07:54 AM

Quote:

Originally Posted by jwick

Trust me you don't want to pull the intercooler if you don't have too. You definitely don't want to have to remove the oil cooler later one. You have a Z in Houston were temperature are above 90deg half the year. You need the radiator upgrade. Just add it to the list pre-turbo. Chuck and I did it in the garage and it took a little more than half a day. Much less if I had know the heat gun trick for the silicon hoses.

I sleep but my body has typically only needed about 6hrs a night.

I read your install thread and I realize that you did it over several weeks, but overall how many hours would you say it took you and your buddy ?

That lift sure looks like it made life easier too. I'll have to do mine on a set of jacks in the good ole garage.. pending the warden lets me park her car outside for a week or so.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diabel's Boosted Performance Single Turbo Build	Diabel	Member's 370Z Gallery	129	06-19-2019 07:40 AM
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 09:44 AM

12-11-2014, 08:59 PM	#217 (permalink)
David Parra Guest Posts: n/a	Hahaha

12-12-2014, 02:45 AM	#220 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	All I know is that I have read the BP 1 tread like 2.5x. The kit is just ingenious. I then waited and waited for Shasha to build the kit again. I was finally able to save the $$ for the kit but I missed the opportunity for the 2nd batch. A few months later v2 came out and I jumped on it. All I'm going to say is that Shasha is building this kit now and has some kits with no name on them. If you miss this round, you might have to wait a long time. I'm thinking of doing a simple recoding of the install when I start wrenching. If it's as easy as everyone says it is (i think it is), the video will be simple. I'm going to install different parts in different stages and times. I plan to do the trans and diff together. Next install is the turbo kit, then the Rad once it gets hotter. YzGyz