Boosted Performance V 2.0 turbo list

Boosted Performance · 11-29-2014, 12:26 PM

Quote:

Originally Posted by SlowZ

Taking a guess that I can't use my tomei single even if I fabricated a extra pipe to meet the flange on the tomei? I love the exhaust so much but I'm not sure if it can keep up with a 600whp tune

Do you have a link/pic for the exhaust you have? Once I see it I can tell you more about compatibility.

A 3" exhaust will flow 600whp.

SlowZ · 11-29-2014, 05:29 PM

SlowZ · 11-29-2014, 05:30 PM

I forget where the flange is but I think it's at the end of the Y pipe

jwick · 11-29-2014, 05:38 PM

Quote:

Originally Posted by SlowZ

I forget where the flange is but I think it's at the end of the Y pipe

Unless that y-pipe transition is in the same exact place as the oem one you are going to need some custom fab to get it to mate up. Looks like you'll be ok if Sasha says the 3" can handle 600whp

SlowZ · 11-29-2014, 05:52 PM

I don't mind doing a custom fab, that's not my main concern. I just LOVE the exhaust and would like to keep it if possible. I don't believe the y pipe is in the same area as the stock one but a little mandrel bent ss 3 inch pipe can handle that.
Sasha what is the most power that a 3 inch can flow? Thanks again guys

Boosted Performance · 11-30-2014, 12:23 AM

With that exhaust, it looks like the OEM style down pipe would bolt right up without having to modify anything. As for maximum power, I'd say you should be able to get to 650whp. I know the supra guys have made over 800whp on a single free flowing 3" exhaust. In this case though, bigger is always better. If you plan on doing this on a stock block, there is nothing to worry about.

SlowZ · 11-30-2014, 05:03 AM

It would be a stock block and in the meanwhile a built motor will be in the works and of course a new exhaust would come into play. Maybe the FI dual 3 inch. Thanks Sasha. Just about ready to send my deposit

zguynate · 12-03-2014, 02:04 AM

The exhaust will probably be too long for a non-nismo 370z. The easiest way to make it fit properly would be to modify the BP downpipe to fit the Tomei exhaust since it would be much easier to weld steel than titanium lol. I have a single AAM 350z exhaust (The Tomei is also for a 350z) and I had to fab up a shorter pipe to bolt to the BP downpipe. This is the power my car made with the BP kit and the single AAM exhaust at ~11psi. Not to mention the car sounds amazing with a single turbo and single exhaust.

And here is a video of what it sounds like inside the car. This was before my retune. Excuse the mis-shift lol.

YzGyz · 12-03-2014, 10:20 AM

GRR!!!! That video make me mad!!!! COME ON HOME KIT. PAPA has a nice new home for your!!!

YzGYz

SlowZ · 12-04-2014, 03:35 AM

Quote:

Originally Posted by dragonbreath

The exhaust will probably be too long for a non-nismo 370z. The easiest way to make it fit properly would be to modify the BP downpipe to fit the Tomei exhaust since it would be much easier to weld steel than titanium lol. I have a single AAM 350z exhaust (The Tomei is also for a 350z) and I had to fab up a shorter pipe to bolt to the BP downpipe. This is the power my car made with the BP kit and the single AAM exhaust at ~11psi. Not to mention the car sounds amazing with a single turbo and single exhaust.

And here is a video of what it sounds like inside the car. This was before my retune. Excuse the mis-shift lol.

That tq is amazing. I know the tomei is titanium but there is a flange on the end of the mid pipe I believe and I knew that I would have to fab something up regardless. My friend owes me a favor anyways so I'll just have him buy me all
The materials and cut and weld what needs to be done. This exhaust will just stay on till the motor gets built and I'll switch it out for a dual 3 inch that can flow enough for high boost and some nitrous

YzGyz · 12-04-2014, 07:09 AM

The thought or question rather just came to mind. What color are the silicone hoses, couplers, and eels? Are they black, red or blue?
My engine cover is red so it would be nice to have a matching red.

YzGyz

jwick · 12-04-2014, 07:15 AM

Quote:

Originally Posted by YzGyz

The thought or question rather just came to mind. What color are the silicone hoses, couplers, and eels? Are they black, red or blue?
My engine cover is red so it would be nice to have a matching red.

YzGyz

Mine are all black

YzGyz · 12-04-2014, 07:59 AM

Thanks Jwick

Black would be preferred if a matching red was not available. It will keep the stealth look instead of flow with red color scheme.

YzGyz

jwick · 12-04-2014, 08:23 AM

Here's a pic of my engine bay just so you know what the couplers look like.

Boosted Performance · 12-04-2014, 09:02 AM

Quote:

Originally Posted by YzGyz

Thanks Jwick

Black would be preferred if a matching red was not available. It will keep the stealth look instead of flow with red color scheme.

YzGyz

I can look in to this, and see if my supplier has all the sizes needed in red.

11-30-2014, 12:23 AM	#156 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	With that exhaust, it looks like the OEM style down pipe would bolt right up without having to modify anything. As for maximum power, I'd say you should be able to get to 650whp. I know the supra guys have made over 800whp on a single free flowing 3" exhaust. In this case though, bigger is always better. If you plan on doing this on a stock block, there is nothing to worry about. SlowZ likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 11-30-2014 at 12:29 AM.

12-03-2014, 02:04 AM	#158 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 73	The exhaust will probably be too long for a non-nismo 370z. The easiest way to make it fit properly would be to modify the BP downpipe to fit the Tomei exhaust since it would be much easier to weld steel than titanium lol. I have a single AAM 350z exhaust (The Tomei is also for a 350z) and I had to fab up a shorter pipe to bolt to the BP downpipe. This is the power my car made with the BP kit and the single AAM exhaust at ~11psi. Not to mention the car sounds amazing with a single turbo and single exhaust. And here is a video of what it sounds like inside the car. This was before my retune. Excuse the mis-shift lol. CL_hiro_g37s likes this. __________________ 2009 370z touring w/sports package Last edited by zguynate; 12-03-2014 at 02:18 AM.

12-03-2014, 10:20 AM	#159 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	GRR!!!! That video make me mad!!!! COME ON HOME KIT. PAPA has a nice new home for your!!! YzGYz zguynate likes this.

12-04-2014, 08:23 AM	#164 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Here's a pic of my engine bay just so you know what the couplers look like. YzGyz likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diabel's Boosted Performance Single Turbo Build	Diabel	Member's 370Z Gallery	129	06-19-2019 07:40 AM
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 09:44 AM

11-29-2014, 05:29 PM	#152 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11

11-29-2014, 05:30 PM	#153 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	I forget where the flange is but I think it's at the end of the Y pipe

11-29-2014, 05:52 PM	#155 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	I don't mind doing a custom fab, that's not my main concern. I just LOVE the exhaust and would like to keep it if possible. I don't believe the y pipe is in the same area as the stock one but a little mandrel bent ss 3 inch pipe can handle that. Sasha what is the most power that a 3 inch can flow? Thanks again guys

11-30-2014, 05:03 AM	#157 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	It would be a stock block and in the meanwhile a built motor will be in the works and of course a new exhaust would come into play. Maybe the FI dual 3 inch. Thanks Sasha. Just about ready to send my deposit

12-04-2014, 07:09 AM	#161 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	The thought or question rather just came to mind. What color are the silicone hoses, couplers, and eels? Are they black, red or blue? My engine cover is red so it would be nice to have a matching red. YzGyz

12-04-2014, 07:59 AM	#163 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Thanks Jwick Black would be preferred if a matching red was not available. It will keep the stealth look instead of flow with red color scheme. YzGyz