GT Motorsports: VQ37VHR Engine Internals Pistons, Rods, Stroker Kits

JB-370z · 05-30-2011, 11:31 AM

Quote:

Originally Posted by toner123

Do you know what we really need to make 600 hp reliably?

I think short block and fuel system upgrade, maybe Sam can answer for us.

bullitt5897 · 05-31-2011, 09:22 AM

Like others have said what is required will determine on your goals. If your looking sub 600rwhp then pistons and rods is just fine no need for valve work. If your going over 600rwhp I would reccomend getting valve work done. It's as simple as that and remember fuel system upgrades where needed.

weiboy718 · 06-02-2011, 03:19 PM

As of 6-1-11

I have 1k saved up for this rebuild. By the end of summer I should have enough lol.

Vinny · 06-09-2011, 10:14 AM

Quote:

Originally Posted by toner123

lol already did this a while ago and he said he would send some packages over to me. I am not in a dire rush but plan on doing this in the winter and want to know what to expect. I think everyone knows me by now that if I want something I am going to call him if I need it. Hell i did spend like 12 k with GTM so I am not bashfull to talk to him. Was just wondering if he posted it becausae if he did then I don't need to call him

In the same position. I'd like to get the parts I need ordered ASAP! I spoke to a local shop about this issue but it didn't really get me anywhere. I was told I needed a full short block, valve work, new fuel pump, oil pump, head gaskets. Studs, valve work, and would be in for a $15k + job..

Seeing as though I'm currently running at 540whp, I find that hard to believe. I know the common answer is to call and speak to sam, but sam is very busy and doesn't always get around to sending out packages to everyone who asks. (not a bash at sam in any way, Just saying that he has a lot on his plate!)

I also only see the vq35 shortblock on the GTM website, so if anyone can shed some light on this, please do!

NewYorkJon34 · 06-09-2011, 10:43 AM

The vq37 shortblock is on the gtm site. This is the route I plan on doing, but I just want to make sure by ordering the shortblock is going to give me the reliability aspect I want pushing 500whp with the stg.2 sc.

bullitt5897 · 06-09-2011, 03:42 PM

Stage 1: $3660.91 Your Basic Short Block With Forged Internals
Stage 2: $6400.00 Your Basic Short Block With Forged Internals and Sleeved
Stage 3: $6995.00 A High Revving 3.8L Short Block With Forged Internals
Stage 4: $8990.00 A 4.2L Basic Short Block With Forged Internals and Sleeved
Stage 5: $8919.48 A High Revving 4.2L Short Block With Forged Internals
Stage 6: $10967.48 A High Revving 4.5L Sleeved Short Block With Forged Internals

bullitt5897 · 06-09-2011, 03:43 PM

Remember There will be more costs involved than just the Block... That is why some of us say Call Sam... I would say fully installed stage 1 Short Block will run you around $8-9k...

toner123 · 06-09-2011, 04:42 PM

And that was my whole point. Everyone just says buy the short block. Guess what gentlemen you need more then just a short block. I told sam I was aiming for 600 rwhp to give me room to grow. Looking at my estimate there was alot more on there then what you guys think. But then again sam said there was multiple ways I could go about it. I want the best, and most reliable way so will buy the extra **** to make it like that

weiboy718 · 06-09-2011, 04:58 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Remember There will be more costs involved than just the Block... That is why some of us say Call Sam... I would say fully installed stage 1 Short Block will run you around $8-9k...

That's exactly the price Sam told me when I inquired him about a simple build. I think I need to call him again soon to find out what's included and what is being done.

NewYorkJon34 · 06-09-2011, 05:19 PM

That also depends on the shop installing it too. 8-9k seems a bit high, no?

NewYorkJon34 · 06-09-2011, 05:23 PM

Sam should be posting today on what else is needed, but 600whp is a lot different than achieving 500whp safely.

toner123 · 06-09-2011, 05:24 PM

Quote:

Originally Posted by NewYorkJon34

That also depends on the shop installing it too. 8-9k seems a bit high, no?

No not really and tbh I think mike is a little off on his numbers. Unless you are going the cheapest way possible. Fast, Reliable, Cheap. Pick two because you cant have all three

EDIT: And what the hell is this **** where is my premium membership

toner123 · 06-09-2011, 05:26 PM

500 safetly sam is going to try and talk you out of building the motor. He is going to tell you it's not needed ATM and why fix it if it isn't broken. Can't you tell I just went through this with him lol

NewYorkJon34 · 06-09-2011, 05:50 PM

He didn't tell me to buy the shortblock, that was my idea cus I don't want to worry about something since it's my daily driver.

toner123 · 06-09-2011, 05:57 PM

Quote:

Originally Posted by NewYorkJon34

He didn't tell me to buy the shortblock, that was my idea cus I don't want to worry about something since it's my daily driver.

IDK man lol. I guess he has a valid point why fix it if it isn't broken. I am just going to up my power to justify the cost of it. Thats why I am going for 600. I think it is kind of fullish to buy a short block and pay all that money to just have the power your car is making now. Unless your just wanting to throw money at the car to make the sentence below your name true

05-31-2011, 09:22 AM	#62 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Like others have said what is required will determine on your goals. If your looking sub 600rwhp then pistons and rods is just fine no need for valve work. If your going over 600rwhp I would reccomend getting valve work done. It's as simple as that and remember fuel system upgrades where needed. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-09-2011, 10:43 AM	#65 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	The vq37 shortblock is on the gtm site. This is the route I plan on doing, but I just want to make sure by ordering the shortblock is going to give me the reliability aspect I want pushing 500whp with the stg.2 sc. __________________ NewYorkJon34's Ultimate Z Build

06-09-2011, 03:42 PM	#66 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Stage 1: $3660.91 Your Basic Short Block With Forged Internals Stage 2: $6400.00 Your Basic Short Block With Forged Internals and Sleeved Stage 3: $6995.00 A High Revving 3.8L Short Block With Forged Internals Stage 4: $8990.00 A 4.2L Basic Short Block With Forged Internals and Sleeved Stage 5: $8919.48 A High Revving 4.2L Short Block With Forged Internals Stage 6: $10967.48 A High Revving 4.5L Sleeved Short Block With Forged Internals __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-09-2011, 03:43 PM	#67 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Remember There will be more costs involved than just the Block... That is why some of us say Call Sam... I would say fully installed stage 1 Short Block will run you around $8-9k... __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-09-2011, 05:19 PM	#70 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	That also depends on the shop installing it too. 8-9k seems a bit high, no? __________________ NewYorkJon34's Ultimate Z Build

06-02-2011, 03:19 PM	#63 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	As of 6-1-11 I have 1k saved up for this rebuild. By the end of summer I should have enough lol.

06-09-2011, 04:42 PM	#68 (permalink)
toner123 Track Member Join Date: May 2010 Location: chesapeake va Age: 39 Posts: 823 Drives: TT 370z Touring/SP Rep Power: 16	And that was my whole point. Everyone just says buy the short block. Guess what gentlemen you need more then just a short block. I told sam I was aiming for 600 rwhp to give me room to grow. Looking at my estimate there was alot more on there then what you guys think. But then again sam said there was multiple ways I could go about it. I want the best, and most reliable way so will buy the extra **** to make it like that

06-09-2011, 05:23 PM	#71 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Sam should be posting today on what else is needed, but 600whp is a lot different than achieving 500whp safely. __________________ NewYorkJon34's Ultimate Z Build

06-09-2011, 05:26 PM	#73 (permalink)
toner123 Track Member Join Date: May 2010 Location: chesapeake va Age: 39 Posts: 823 Drives: TT 370z Touring/SP Rep Power: 16	500 safetly sam is going to try and talk you out of building the motor. He is going to tell you it's not needed ATM and why fix it if it isn't broken. Can't you tell I just went through this with him lol

06-09-2011, 05:50 PM	#74 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	He didn't tell me to buy the shortblock, that was my idea cus I don't want to worry about something since it's my daily driver. __________________ NewYorkJon34's Ultimate Z Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Product Announcement HKS CAMP2 Real-Time Engine Monitoring	Slidefox	Forced Induction	8	07-09-2011 12:50 PM
VQ37VHR 2008 10 best Engine of the Year	AK370Z	Engine & Drivetrain	14	02-04-2009 01:04 PM
Let's Welcome GT MotorSports	AK370Z	GT MotorSports	8	01-24-2009 11:56 PM
Central 20 Zsport Brake Kits for Nissan 370Z	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	12-23-2008 03:16 AM
Next-gen Mercedes SLK to feature diesel engine	AK370Z	Other Vehicles	2	11-15-2008 02:36 PM