624whp not sure if right...
 

Hey guys I gotta 2009 370z with a stage 2 Gtm tt kit.
Mods:
38mm wg open dump tubes
Aam true dual exhaust 2.5"
Z1 lightweight flywheel and 6 puck clutch kit
And that's all the big stuff....Attachment 94198does this look right to you guys? It's on pump gas btw. 91 dyno was superflow.[/QUOTE][/QUOTE]

Sorry trying to get the dyno graph picture but don't know how.

Seems like a VERY generous dyno.

very much ^^^

How in hell would your torque be almost as high as your HP??

How much boost? the power and tq curve seem to taper off pretty quick..

^Indeed, I have GTM Stage 2 as well with a 3.7L VQ35, I was debating on upgrading the turbo's to stage 4's now that my built motor is coming back together but damn I am regretting not doing that now after I got the stage 2 snails powder coated. Guess I'll have to look at that kinda power band for a while as it looks like they run out of air or something. What was psi on the tune? I'd kinda doubt those numbers on 91, what was the CF assuming you dyno'd in CO?

It was about 11.6psi

Small, poor flowing turbines will do that. When you see TQ numbers be very close or even exceed HP, you have reached the flow limit of the turbine.

I can tell you this. I made 533 corrected dynojet on 10lbs running e85 with 14 degrees timing. I honestly dont think im making that much. Probably around 480. The correction factor for turbos at elevation is way inflated.

I am at 4500 ft elevation so mAybe that's why.

That would put you at 608. Still sounds high for 91. Probably had to pull timing.

I didn't even get it tuned it's still SAMs email tune from a year ago lol. The afr was 12.1 -12.3.

Can I ask what dyno this was on?

Superflow dyno it says the full name on the dyno graph sheet.