Suggestions for a nitrous progressive controller

tommyguns · 08-18-2014, 05:05 PM

Was wondering what others are using or could suggest.
Thanks in advance!

gbrettin · 08-18-2014, 08:32 PM

How big of HP shot are you going to run?

tommyguns · 08-18-2014, 09:12 PM

Quote:

Originally Posted by gbrettin

How big of HP shot are you going to run?

Max 100, but I would more likely to go with a 75

madwi · 08-19-2014, 08:12 AM

I have a NOS mini progressive controller. Built in TPS and RPM window switches

It's a pretty small unit so it should go pretty much anywhere. Price tag wasn't too bad either (around $250). In the future I wouldn't mind getting one with a nice screen and put it in the cubby hole.

Here is one installed next to some other components so you can get an idea of the size better. (pic swiped from CapeT/A on ls1tech).

gbrettin · 08-19-2014, 04:24 PM

Quote:

Originally Posted by tommyguns

Max 100, but I would more likely to go with a 75

100HP shot is where it's at.

tommyguns · 11-13-2014, 02:41 PM

Hope you don't mind if I pick your brains a bit. Relays, what are they used for and how many do I need. I'll have a heater, purge and opener each will have a separate switch. If that helps, im no electrical genius by any means, so please forgive my ignorance.

tommyguns · 11-13-2014, 02:42 PM

Quote:

Originally Posted by gbrettin

100HP shot is where it's at.

More than likely! Just didn't want to change plugs, I hear its a bitch! Speaking of plugs, what's the latest and greatest for our situation?

tommyguns · 11-13-2014, 02:45 PM

Quote:

Originally Posted by madwi

I have a NOS mini progressive controller. Built in TPS and RPM window switches

It's a pretty small unit so it should go pretty much anywhere. Price tag wasn't too bad either (around $250). In the future I wouldn't mind getting one with a nice screen and put it in the cubby hole.

Here is one installed next to some other components so you can get an idea of the size better. (pic swiped from CapeT/A on ls1tech).

That's some nice work, looking for the same outcome. I have the NOS unit in hand and yes I would have liked a bigger screen, but this serves my purpose well. On a side note where did you get the labels for the wire, looks like shrink boot with printing. Nice touch!

gbrettin · 11-13-2014, 10:31 PM

Quote:

Originally Posted by tommyguns

More than likely! Just didn't want to change plugs, I hear its a bitch! Speaking of plugs, what's the latest and greatest for our situation?

I didn't change my plugs. I'd definitely change them anything more than 100hp and also get a tune.

My car has been running perfect. Tell you what, when I get my car out next spring I'll pull the plugs and post some pictures for you.

madwi · 11-13-2014, 11:25 PM

Quote:

Originally Posted by tommyguns

That's some nice work, looking for the same outcome. I have the NOS unit in hand and yes I would have liked a bigger screen, but this serves my purpose well. On a side note where did you get the labels for the wire, looks like shrink boot with printing. Nice touch!

I found a cheap label maker that you can swap out the labels for heat shrink tubing. I am at work right now but when I get home I can get the model number for you. I think it is a dymo or something like that. Works pretty slick.
The picture I posted is from Cape T/A from ls1tech and is where I got the idea for the labels from.
Here is a printed label that I was testing out.

( Click to show/hide )

tommyguns · 11-14-2014, 12:08 AM

That looks proper my friend! Did a little research on relays and their use. Ordered a BigDog double 70amp for the purge and the heater.

madwi · 11-14-2014, 01:13 AM

Quote:

Originally Posted by tommyguns

That looks proper my friend! Did a little research on relays and their use. Ordered a BigDog double 70amp for the purge and the heater.

I like that block better than just screwing the relays where ever. Looks a lot cleaner to me.

madwi · 11-14-2014, 08:10 AM

Dymo Rhino 4200 is the label maker I have.

I have no idea how durable it is but for $90 and the few times I use it, it should suffice.

( Click to show/hide )

tommyguns · 11-14-2014, 10:43 AM

Quote:

Originally Posted by madwi

Dymo Rhino 4200 is the label maker I have.

I have no idea how durable it is but for $90 and the few times I use it, it should suffice.

( Click to show/hide )

You the man bro!

madwi · 11-14-2014, 11:40 AM

Quote:

Originally Posted by tommyguns

You the man bro!

08-18-2014, 05:05 PM	#1 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Suggestions for a nitrous progressive controller Was wondering what others are using or could suggest. Thanks in advance! __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

08-19-2014, 08:12 AM	#4 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I have a NOS mini progressive controller. Built in TPS and RPM window switches It's a pretty small unit so it should go pretty much anywhere. Price tag wasn't too bad either (around $250). In the future I wouldn't mind getting one with a nice screen and put it in the cubby hole. Here is one installed next to some other components so you can get an idea of the size better. (pic swiped from CapeT/A on ls1tech). tommyguns, fuct and gbrettin like this. Last edited by madwi; 08-19-2014 at 08:15 AM.

11-13-2014, 02:41 PM	#6 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Hope you don't mind if I pick your brains a bit. Relays, what are they used for and how many do I need. I'll have a heater, purge and opener each will have a separate switch. If that helps, im no electrical genius by any means, so please forgive my ignorance. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

11-14-2014, 12:08 AM	#11 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	That looks proper my friend! Did a little research on relays and their use. Ordered a BigDog double 70amp for the purge and the heater. madwi likes this. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

11-14-2014, 08:10 AM	#13 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Dymo Rhino 4200 is the label maker I have. I have no idea how durable it is but for $90 and the few times I use it, it should suffice. ( Click to show/hide ) tommyguns likes this.

08-18-2014, 08:32 PM	#2 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,287 Drives: Tricycle Rep Power: 589151	How big of HP shot are you going to run?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Progressive Snapshot	gbrettin	Nissan 370Z General Discussions	90	02-07-2015 12:59 PM
Gym Rats enter! Suggestions Suggestions!	Asheth	The Lounge (Off Topic)	50	04-18-2013 05:36 PM
RLL-89-2 Progressive Incline Race Ramps	Fred@ReverseLogic	Tools / Ramps	0	01-06-2012 11:46 PM
nitrous?	Snakes709	Forced Induction	67	07-26-2011 11:34 AM
VOLK progressive TS, 2 piece rims + TIRES	Reaper42	Parts for sale (Private Classifieds)	2	02-09-2010 05:47 PM