Upgraded engine mounts

Glover997 · 08-16-2014, 02:56 PM

^ Positive .. They do fit

Super Werty · 08-16-2014, 06:08 PM

does anyone have a video to show the increased noise from solid mounts? engine or trans?

whiteZ34 · 08-17-2014, 12:05 PM

When I started my BP build, I did the motor mounts while I had the headers and tranny all out. I decided to do the motor mounts and tranny mount only because of the added power I'd be making. Just to kinda do it all right the first time. My car only has 10,000 miles on it so the factory mounts are fine. Just by my choice I did the swap.

whiteZ34 · 08-17-2014, 12:07 PM

Forgot to mention haha...I swapped them with the z1 urethane mounts.

08-16-2014, 06:08 PM	#2 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 13	does anyone have a video to show the increased noise from solid mounts? engine or trans? __________________ The Build

08-17-2014, 12:05 PM	#3 (permalink)
whiteZ34 Base Member Join Date: May 2013 Location: Pittsburgh Age: 33 Posts: 217 Drives: 2012 Boosted 370z Rep Power: 12	When I started my BP build, I did the motor mounts while I had the headers and tranny all out. I decided to do the motor mounts and tranny mount only because of the added power I'd be making. Just to kinda do it all right the first time. My car only has 10,000 miles on it so the factory mounts are fine. Just by my choice I did the swap. __________________ R/T Built motor, wiseco 9:1 Pistons, Eagle H-beam rods, ARP L-19\| BP kit, PTE 6766, EPS 70mm TB, GTR Intake, PRS lower conversion\| ID1000cc, CJM Twin pump 340&255, PRS Rails, CJM fuel return\| Fast Intentions\| R/T Tuned, 660WHP 596WTQ at 18lbs. 93 octane

08-17-2014, 12:07 PM	#4 (permalink)
whiteZ34 Base Member Join Date: May 2013 Location: Pittsburgh Age: 33 Posts: 217 Drives: 2012 Boosted 370z Rep Power: 12	Forgot to mention haha...I swapped them with the z1 urethane mounts. __________________ R/T Built motor, wiseco 9:1 Pistons, Eagle H-beam rods, ARP L-19\| BP kit, PTE 6766, EPS 70mm TB, GTR Intake, PRS lower conversion\| ID1000cc, CJM Twin pump 340&255, PRS Rails, CJM fuel return\| Fast Intentions\| R/T Tuned, 660WHP 596WTQ at 18lbs. 93 octane

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Engine and Transmission mounts	Joepro	DIY Section (Do-It-Yourself)	18	03-26-2023 01:56 PM
Drop Engineering Engine Mounts	KamiSpeed	Engine & Drivetrain	119	03-11-2017 03:49 PM

08-16-2014, 02:56 PM	#1 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	^ Positive .. They do fit