Upgraded engine mounts

TopgunZ · 08-12-2014, 11:50 AM

Short and sweet.

At what horsepower levels in this car do we need to start looking at upgraded engine mounts?

Polyurethane or Aluminum? What is better and why?

Glover997 · 08-12-2014, 12:55 PM

If your oem mounting is good and stiff you don't need these , however Aluminum is usually for racing application where the car is not DD especially when you have these for tranny also, they're stiff and noisy with all clicking sound all round .

DEpointfive0 · 08-12-2014, 01:18 PM

Get the Z1 urethane mounts, you won't have any negative side effects from my experience.
Go through Jon, and tell him Andrew the asshole sent you

karotZ · 08-12-2014, 01:29 PM

Quote:

Originally Posted by DEpointfive0

Get the Z1 urethane mounts, you won't have any negative side effects from my experience.
Go through Jon, and tell him Andrew the asshole sent you

Hahaha

theDreamer · 08-12-2014, 01:58 PM

I would not say there is a power level that you 'should' do it, but even watching the cars stock/bolt ons on dynos you can see some flex or engine movement.
I would say if you plan to do this, do engine, transmission, and rear diff mounts all at once.

phunk · 08-12-2014, 05:25 PM

The stock mounts are pretty decent. I like having solid mounts because my turbos and what-not are very close to the chassis, and its nice to not having them wack the side firewalls during powershifts. Also it reduces pull on the intercooler couplers, etc.

I personally go solid metal with the VQ. Its a very smooth engine IMHO and they only really make a lot of annoying vibration when the starter is cranking. After that, I hardly notice they are there other than the reduced lag between throttle and drivetrain acceleration. Maybe people more sensitive to noise would have more complaints about it. But personally I dont really perceive much difference.

I dont go solid metal on the trans mount though, I tried that and it put the transmission noise over the top for me.

gbrettin · 08-12-2014, 06:10 PM

I have the Z1 urethane mounts and really like them. I tore my OEM mount due to some spirited driving. I'd think that the turbos torquing the OEM mounts would make them tear quickly.

They are pretty cheap... might as well do them if you are turboing.

TopgunZ · 08-12-2014, 10:35 PM

Are the urethane mounts just stronger or are they more rigid also?

DEpointfive0 · 08-12-2014, 11:04 PM

Quote:

Originally Posted by TopgunZ

Are the urethane mounts just stronger or are they more rigid also?

Both

roplusbee · 08-13-2014, 03:50 AM

Quote:

Originally Posted by phunk

The stock mounts are pretty decent. I like having solid mounts because my turbos and what-not are very close to the chassis, and its nice to not having them wack the side firewalls during powershifts. Also it reduces pull on the intercooler couplers, etc.

I personally go solid metal with the VQ. Its a very smooth engine IMHO and they only really make a lot of annoying vibration when the starter is cranking. After that, I hardly notice they are there other than the reduced lag between throttle and drivetrain acceleration. Maybe people more sensitive to noise would have more complaints about it. But personally I dont really perceive much difference.

I dont go solid metal on the trans mount though, I tried that and it put the transmission noise over the top for me.

I have the solid motor mounts, but have not changed out my trans mount or diff mounts yet. I plan to go solid all the way, but I may go with urethane on the trans mount only to keep the chatter down.

I noticed a massive difference with the solid mounts installed. Response was more direct and precise. The only downside(s)..........increased vibration and chatter (starting from standstill).

G37sHKS · 08-13-2014, 04:10 AM

I have urethane Z1 for engine and transmission. I would do it again without a doubt

DEpointfive0 · 08-13-2014, 04:13 AM

For the 7AT I wouldn't redo engine mounts. Not because of quality or anything, coming to the lights sucks... The whole car vibrates

Glover997 · 08-13-2014, 05:50 AM

Quote:

Originally Posted by Glover997

If your oem mounting is good and stiff you don't need these , however Aluminum is usually for racing application where the car is not DD especially when you have these for tranny also, they're stiff and noisy with all clicking sound all round .

And also I'm curious to know if z1 mounts ( motor & tranny) work for 07+ HR Sedans too. z1 have them for z370/G37 coupes only, but can't seem to find some for HR sedans chassis.

jwick · 08-13-2014, 07:41 AM

Quote:

Originally Posted by Glover997

And also I'm curious to know if z1 mounts ( motor & tranny) work for 07+ HR Sedans too. z1 have them for z370/G37 coupes only, but can't seem to find some for HR sedans chassis.

Call Jon at Z1 and talk to him. He's a really helpful dude.

Glover997 · 08-16-2014, 03:56 PM

^ Positive .. They do fit

08-12-2014, 11:50 AM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Upgraded engine mounts Short and sweet. At what horsepower levels in this car do we need to start looking at upgraded engine mounts? Polyurethane or Aluminum? What is better and why? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-12-2014, 01:18 PM	#3 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Get the Z1 urethane mounts, you won't have any negative side effects from my experience. Go through Jon, and tell him Andrew the asshole sent you gbrettin, karotZ and Aviator44 like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-12-2014, 01:58 PM	#5 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I would not say there is a power level that you 'should' do it, but even watching the cars stock/bolt ons on dynos you can see some flex or engine movement. I would say if you plan to do this, do engine, transmission, and rear diff mounts all at once. Super Werty likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-12-2014, 05:25 PM	#6 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	The stock mounts are pretty decent. I like having solid mounts because my turbos and what-not are very close to the chassis, and its nice to not having them wack the side firewalls during powershifts. Also it reduces pull on the intercooler couplers, etc. I personally go solid metal with the VQ. Its a very smooth engine IMHO and they only really make a lot of annoying vibration when the starter is cranking. After that, I hardly notice they are there other than the reduced lag between throttle and drivetrain acceleration. Maybe people more sensitive to noise would have more complaints about it. But personally I dont really perceive much difference. I dont go solid metal on the trans mount though, I tried that and it put the transmission noise over the top for me. esfourteen and Super Werty like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

08-12-2014, 10:35 PM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Are the urethane mounts just stronger or are they more rigid also? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-12-2014, 12:55 PM	#2 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	If your oem mounting is good and stiff you don't need these , however Aluminum is usually for racing application where the car is not DD especially when you have these for tranny also, they're stiff and noisy with all clicking sound all round .

08-12-2014, 06:10 PM	#7 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	I have the Z1 urethane mounts and really like them. I tore my OEM mount due to some spirited driving. I'd think that the turbos torquing the OEM mounts would make them tear quickly. They are pretty cheap... might as well do them if you are turboing.

08-13-2014, 04:10 AM	#11 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	I have urethane Z1 for engine and transmission. I would do it again without a doubt __________________ G37 BUILD UNDER CONSTRUCTION

08-13-2014, 04:13 AM	#12 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	For the 7AT I wouldn't redo engine mounts. Not because of quality or anything, coming to the lights sucks... The whole car vibrates __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-16-2014, 03:56 PM	#15 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	^ Positive .. They do fit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Engine and Transmission mounts	Joepro	DIY Section (Do-It-Yourself)	18	03-26-2023 02:56 PM
Drop Engineering Engine Mounts	KamiSpeed	Engine & Drivetrain	119	03-11-2017 04:49 PM