Gauge selection

Arrvaxx · 08-12-2014, 05:12 AM

52mm. There are DIY threads about doing just that. Also search for Galeforce's a-pillar thing.

GaleForce · 08-12-2014, 08:36 AM

Quote:

Originally Posted by Arrvaxx

52mm. There are DIY threads about doing just that. Also search for Galeforce's a-pillar thing.

Thank you sir

I am looking into a custom multi gauge for us. The options are nearly endless so I need to get it narrowed down. I was thinking a multi gauge for FI guys, and a multi gauge for NA guys. I would also have an option for guys that want to go all out. I'm talking a 4.3" screen in the upper cubby location displaying up to 6 readings on a screen at one time, with the ability to page through to more screens, reading.

Think there would be any interest?

This is an example for the 52mm multi gauge for FI guys,

3GsCustomssample by J M Gale, on Flickr

Arrvaxx · 08-12-2014, 10:01 AM

Quote:

Originally Posted by GaleForce

Thank you sir

I am looking into a custom multi gauge for us. The options are nearly endless so I need to get it narrowed down. I was thinking a multi gauge for FI guys, and a multi gauge for NA guys. I would also have an option for guys that want to go all out. I'm talking a 4.3" screen in the upper cubby location displaying up to 6 readings on a screen at one time, with the ability to page through to more screens, reading.

Think there would be any interest?

This is an example for the 52mm multi gauge for FI guys,

3GsCustomssample by J M Gale, on Flickr

First...what is the lead time for your pillar Galeforce? I may wind up with a set of four Defi's this winter. Not sure yet. But need to consider your lead time in to my plans if I go there. 1 pod, standard.

Second...Custom info on the navi? Hot. I really want to start my own gauge company and specialize in multi-gauges. Dials, not screens. All the multigauge dials I have seen are ugly. Why can't Defi broaden their selection. I really have a love-hate things with those guys.

You know what!!!!!! I just realized that you can display reverse camera info on your mirror...see where I am going? That would be cool. >.>

jwick · 08-12-2014, 10:15 AM

Quote:

Originally Posted by Arrvaxx

First...what is the lead time for your pillar Galeforce? I may wind up with a set of four Defi's this winter. Not sure yet. But need to consider your lead time in to my plans if I go there. 1 pod, standard.

Second...Custom info on the navi? Hot. I really want to start my own gauge company and specialize in multi-gauges. Dials, not screens. All the multigauge dials I have seen are ugly. Why can't Defi broaden their selection. I really have a love-hate things with those guys.

You know what!!!!!! I just realized that you can display reverse camera info on your mirror...see where I am going? That would be cool. >.>

I've been pretty happy with my GReddy Multi-gauge. It runs boost on the dial and any two I select (oil temp, oil press, coolant temp, fuel press, voltage, EGT, I think that is all of them. Oh boost if you want digital too) on the LCD screen. It stores peaks and will give you audio warning. The only draw back to it is it will only alarm what is being displayed. Oh and it's a 62mm pod, which is the only one in existence. Good news Mr. Gale already has a template for that size

Although they stopped production of it for future release of a replacement.

aszyd · 08-12-2014, 11:40 AM

Quote:

Originally Posted by jwick

I've been pretty happy with my GReddy Multi-gauge. It runs boost on the dial and any two I select (oil temp, oil press, coolant temp, fuel press, voltage, EGT, I think that is all of them. Oh boost if you want digital too) on the LCD screen. It stores peaks and will give you audio warning. The only draw back to it is it will only alarm what is being displayed. Oh and it's a 62mm pod, which is the only one in existence. Good news Mr. Gale already has a template for that size

Although they stopped production of it for future release of a replacement.

And it's expensive as hell! I was looking into the Greddy, but the cost and all the things you mentioned turned me off. If they had their new version out already, I might have considered it. But I'm not about to drop $500 to display oil temp and pres. on the same gauge, when it is the wrong size and already EOL. Instead, I spent 300 to do it with the two NEW Tanabe gauges.

That being said, if I ever went turbo, I could see using the Greddy for boost, IAT and EGT on the same gauge.

You are correct about the video display while the car is moving issue, but there are wiring hacks that can be done to prevent that problem.

jwick · 08-12-2014, 12:12 PM

Quote:

Originally Posted by aszyd

And it's expensive as hell! I was looking into the Greddy, but the cost and all the things you mentioned turned me off. If they had their new version out already, I might have considered it. But I'm not about to drop $500 to display oil temp and pres. on the same gauge, when it is the wrong size and already EOL. Instead, I spent 300 to do it with the two NEW Tanabe gauges.

That being said, if I ever went turbo, I could see using the Greddy for boost, IAT and EGT on the same gauge.

You are correct about the video display while the car is moving issue, but there are wiring hacks that can be done to prevent that problem.

I wouldn't consider running any gauges NA. I researched all the options and the GReddy and Innovate were the best two pod combination option on the market. Everything else either left something to be desired or involved more pods. (item to note is I have a G and there are no pods on the dash and everyone has the display screen regardless if you have nav or not)

As for cost. It was about the same as any other setup combination I looked at assuming you buy good gauges, which is the only way to go when boosting. Why spending $10-15k and then cheap out for a couple hundred savings on gauges.

aszyd · 08-12-2014, 01:43 PM

Quote:

Originally Posted by jwick

I wouldn't consider running any gauges NA. I researched all the options and the GReddy and Innovate were the best two pod combination option on the market. Everything else either left something to be desired or involved more pods. (item to note is I have a G and there are no pods on the dash and everyone has the display screen regardless if you have nav or not)

As for cost. It was about the same as any other setup combination I looked at assuming you buy good gauges, which is the only way to go when boosting. Why spending $10-15k and then cheap out for a couple hundred savings on gauges.

I'm with you on all of that. I have an oil cooler ready to go, but the general consensus was to not run one without a pressure gauge, so out came the stock gauges and in went aftermarket. I was hoping for a dual pressure / temp setup, but the only gauge that worked for me was the Greddy and I was ultimately unhappy with it. If it were 52mm and/or not EOL, my story would be different.

nomodsjk · 08-12-2014, 01:32 PM

Quote:

Originally Posted by aszyd

And it's expensive as hell! I was looking into the Greddy, but the cost and all the things you mentioned turned me off. If they had their new version out already, I might have considered it. But I'm not about to drop $500 to display oil temp and pres. on the same gauge, when it is the wrong size and already EOL. Instead, I spent 300 to do it with the two NEW Tanabe gauges.

That being said, if I ever went turbo, I could see using the Greddy for boost, IAT and EGT on the same gauge.

You are correct about the video display while the car is moving issue, but there are wiring hacks that can be done to prevent that problem.

I just bought the new tanabe gauges at R/T tuning yesterday and they are definitely the sexiest gauges on the market right now IMHO

Aviator44 · 08-14-2014, 04:49 PM

Quote:

Originally Posted by GaleForce

Thank you sir

I am looking into a custom multi gauge for us. The options are nearly endless so I need to get it narrowed down. I was thinking a multi gauge for FI guys, and a multi gauge for NA guys. I would also have an option for guys that want to go all out. I'm talking a 4.3" screen in the upper cubby location displaying up to 6 readings on a screen at one time, with the ability to page through to more screens, reading.

Think there would be any interest?

This is an example for the 52mm multi gauge for FI guys,

3GsCustomssample by J M Gale, on Flickr

I'm interested. Would it be capable of running dual widebands?

I'm currently looking at the Defi ACU with their ZD screen.
https://www.youtube.com/watch?v=IEgFDWxu5fU

GaleForce · 08-14-2014, 06:04 PM

Quote:

Originally Posted by Aviator44

I'm interested. Would it be capable of running dual widebands?

I'm currently looking at the Defi ACU with their ZD screen.
https://www.youtube.com/watch?v=IEgFDWxu5fU

It can be configured to do what ever you want. Yes it can do dual widebands.

I'm very familiar with Defi stuff.

binary0x01 · 08-15-2014, 12:13 AM

Quote:

Originally Posted by GaleForce

Thank you sir

I am looking into a custom multi gauge for us. The options are nearly endless so I need to get it narrowed down. I was thinking a multi gauge for FI guys, and a multi gauge for NA guys. I would also have an option for guys that want to go all out. I'm talking a 4.3" screen in the upper cubby location displaying up to 6 readings on a screen at one time, with the ability to page through to more screens, reading.

Think there would be any interest?

This is an example for the 52mm multi gauge for FI guys,

3GsCustomssample by J M Gale, on Flickr

In for the cubby option.

08-12-2014, 05:12 AM	#1 (permalink)
Arrvaxx A True Z Fanatic Join Date: Jul 2013 Location: Whore Island, MN Posts: 1,243 Drives: 40th F.I. Twin Turbo Rep Power: 18	52mm. There are DIY threads about doing just that. Also search for Galeforce's a-pillar thing. GaleForce and zefaulter like this. __________________ 2010 370Z 40th Anniversary (#480 born 1/19/2010) Fast Intentions Twin Turbo \| Varis Arising II \| Limited Edition Recaro Sportster \| Tuned by Specialty Z \| 604hp 525 torque @14lbs boost on 100 octane

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauge selection for a twin-turbo 370z?	Nuc370z	Forced Induction	3	05-03-2014 11:59 PM
Summer Tire Selection	fuzzywuzzy	Wheels & Tires	21	01-07-2011 10:29 AM
Need help on selection of motor oil	kyung88	Engine & Drivetrain	49	11-17-2010 06:38 PM
Clutch selection	Seth G	Engine & Drivetrain	0	03-15-2010 07:33 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM