How much boost pressure can a built VQ37VHR withstand?

TerribleONE · 11-06-2014, 12:32 PM

Quote:

Originally Posted by 1slow370

thread? how in the hell did he fit 15's

Quote:

Originally Posted by phunk

It cost me about $1000 for my 15s and 28s with little 350z brakes. The car had 1.6s in it I am sure, I just unfortunately didnt get enough practice before losing my clutch.

Base brakes will fit a 15" rim in the rear IIRC

1slow370 · 11-06-2014, 12:34 PM

Quote:

Originally Posted by phunk

350z base model brakes bolt right up and clear 15s.

wow the 350z must have teeny tiny brakes I thought they would be bigger than that. does the e-brake still work?

phunk · 11-06-2014, 12:34 PM

Quote:

Originally Posted by 1slow370

wow the 350z must have teeny tiny brakes I thought they would be bigger than that. does the e-brake still work?

Yup it works, same drum style ebrake its all compatible

i took step by step pics of the conversion if anyone needs them. There isnt much to it though. The only modification you have to make is some trimming of the dust shield to clear the calipers (and the wheels... LOL even the dust shields are too large to fit inside a 15).

KratikosG37 · 11-06-2014, 12:36 PM

Quote:

Originally Posted by TerribleONE

Best we got out of my car was like a high 1.6 I think.. Then it broke. lol

If i remember correctly it was 1.48ish.

Quote:

Originally Posted by 1slow370

thread? how in the hell did he fit 15's

He tubed out/rolled the finders.

Quote:

Originally Posted by phunk

It cost me about $1000 for my 15s and 28s with little 350z brakes. The car had 1.6s in it I am sure, I just unfortunately didnt get enough practice before losing my clutch.

6k was inculding all the suspension mods. It was Sam's 1st stroked 350z in the New Orleans area.

1slow370 · 11-06-2014, 12:36 PM

also do you need to change the rear lines or will the sport brake lines conect?

KratikosG37 · 11-06-2014, 12:40 PM

another 10 second VTR 350Z - YouTube

he did a 1.66 60ft still ran 10.6. He must have been a little to heavy on the throttle coming out of the whole, but have the top end power to break 10sec with ease.
same set up, but had skinnies in the front

phunk · 11-06-2014, 12:41 PM

Quote:

Originally Posted by 1slow370

also do you need to change the rear lines or will the sport brake lines conect?

I switched to stoptech's rear braided lines (sold for 370z sport brakes) and it was a nice direct fit. The stock lines are weird with the brackets and little pipes, I am not sure if they would work. I left them on the sport calipers and when I switch back and forth the lines stay on the calipers.

phunk · 11-06-2014, 12:50 PM

How I put on 350z rear base brakes and 15s with ET Street Radials:

Remove stock brakes, remove axle nut, remove wheel bearing, remove dust shield.

draw a cut-line to clear calipers. I used a piece of -6 hose and tucked it against the lip as a guide for the sharpie:

cut along line:

clearance required for calipers:

personally I filed off sharp edges and repainted the dust shields, but if you dont care you can just put them back on.

admire your 15s (28s on them for me):

admire your tiny brakes:

admire your xmas tree (if you went with 28s instead of 26s):

looks tougher than it is:

jwick · 11-06-2014, 01:12 PM

Phunk love the sticker

1slow370 · 11-06-2014, 01:46 PM

I'm making you a thread for that post.

phunk · 11-06-2014, 01:46 PM

I guess I should mention that if you do not have extended wheel studs then you will need them for most drag wheels, along with shank style lug nuts for the wheels, and pass through lugs for your normal wheels.

TopgunZ · 11-06-2014, 01:49 PM

Theres Phunk educating the hell out of us again. Gotta love when he chimes in.

1slow370 · 11-06-2014, 01:49 PM

You now have a thread in in the wheel's and tire section for that. Any extra input would be great to go there then we can have a mod sticky it.

KratikosG37 · 11-06-2014, 02:02 PM

Quote:

Originally Posted by phunk

I guess I should mention that if you do not have extended wheel studs then you will need them for most drag wheels, along with shank style lug nuts for the wheels, and pass through lugs for your normal wheels.

Thought we we're talking about FI.

phunk · 11-06-2014, 02:08 PM

Quote:

Originally Posted by KratikosG37

Thought we we're talking about FI.

you guys have been going back and forth about traction for like 6+ pages. figured i would share some info on how to solve it.

11-06-2014, 12:36 PM	#230 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	also do you need to change the rear lines or will the sport brake lines conect? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-06-2014, 12:40 PM	#231 (permalink)
KratikosG37 Enthusiast Member Join Date: Jun 2014 Location: New Orleans, LA Posts: 273 Drives: 09 TT Wrapped G37 Rep Power: 11	another 10 second VTR 350Z - YouTube he did a 1.66 60ft still ran 10.6. He must have been a little to heavy on the throttle coming out of the whole, but have the top end power to break 10sec with ease. same set up, but had skinnies in the front __________________ KratikosG37 Build Log http://www.myg37.com/forums/build-th...ml#post3888739 Last edited by KratikosG37; 11-06-2014 at 12:43 PM.

11-06-2014, 12:50 PM	#233 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	How I put on 350z rear base brakes and 15s with ET Street Radials: Remove stock brakes, remove axle nut, remove wheel bearing, remove dust shield. draw a cut-line to clear calipers. I used a piece of -6 hose and tucked it against the lip as a guide for the sharpie: cut along line: clearance required for calipers: personally I filed off sharp edges and repainted the dust shields, but if you dont care you can just put them back on. admire your 15s (28s on them for me): admire your tiny brakes: admire your xmas tree (if you went with 28s instead of 26s): looks tougher than it is: TerribleONE, jwick, FPenvy and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 11-06-2014 at 01:01 PM.

11-06-2014, 01:12 PM	#234 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Phunk love the sticker phunk likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

11-06-2014, 01:46 PM	#235 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	I'm making you a thread for that post. phunk likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-06-2014, 01:46 PM	#236 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I guess I should mention that if you do not have extended wheel studs then you will need them for most drag wheels, along with shank style lug nuts for the wheels, and pass through lugs for your normal wheels. TerribleONE and KratikosG37 like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-06-2014, 01:49 PM	#237 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Theres Phunk educating the hell out of us again. Gotta love when he chimes in. TerribleONE, phunk, BBRSpeedWorks and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-06-2014, 01:49 PM	#238 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	You now have a thread in in the wheel's and tire section for that. Any extra input would be great to go there then we can have a mod sticky it. TerribleONE, phunk, TopgunZ and 1 others like this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] VQ37VHR built Engine 4.0L & GTM Stage 2 Supercharger kit	boraturbo	Parts for sale (Private Classifieds)	27	09-28-2012 08:22 AM
WTT: Matte White Fully Built Show and Go Evolution 9 RS ~ 740hp/540tq on LOW Boost	Anarchy99	Other Vehicle For sale	8	07-14-2012 08:59 AM
[FOR SALE] STRI Oil temp. Oil pressure and boost gauges	Ron	Parts for sale (Private Classifieds)	10	05-03-2012 01:30 PM
[FOR SALE] NEW PROSPORT GAUGES (BOOST, AFR, OIL TEMP and OIL PRESSURE)	kosstick	Parts for sale (Private Classifieds)	54	01-26-2012 10:02 PM
FS: Brand New Defi BF Link Gauges Amber Boost / Oil Pressure	twenzel	Parts for sale (Private Classifieds)	2	02-08-2010 03:20 AM