My 5k budget mid mount turbo build

BBRSpeedWorks · 09-23-2014, 06:30 PM

here is a pic of my datalog from just a minute ago very very safe tune but look at the MAF's volts at 10psi i think i have the lowest of any kit out there....

BBRSpeedWorks · 09-23-2014, 06:39 PM

and some more proof....maf look great now time to lean it out some and get some more HP...

Megan370z · 09-23-2014, 10:02 PM

barely 4volt at 10psi @6000rpm sound good

what size is your MAF tube ? 2.75'' or 3'' ?

BBRSpeedWorks · 09-23-2014, 10:11 PM

3in with tall maf housings. .it only hit 4 volts a couple time mostly 3.92

BBRSpeedWorks · 09-24-2014, 06:17 PM

just got of the phone with jon at Z1 and just sent him some logs and my map he is going to clean it up so it's not so rich...i'm pretty sure the stock clutch is about done...anyone know how much it can hold?...jon is also going to let me kno about when i can get on the dyno to...any one recommend any clutch thats not 2k...

Mitco39 · 09-24-2014, 06:19 PM

I run this baby...

South Bend Clutch Stage 2 Drag Clutch kit 6 Paddle

Handles it just fine.

jwick · 09-24-2014, 07:02 PM

Lots of people run this one and love it. Most of the FI turbo kits are mated to these

http://specialtyz.com/shop/default/s...4-and-v36.html

I personally run the Z1 full face and lite weight flywheel and have had no issues but I'm not reaching for 600whp. I'm probably more like 475-500 whp and 450ish wftlb

TopgunZ · 09-24-2014, 09:14 PM

This is awesome man. I need to figure out the maf situation.
I.have a southbend stage 3 quiet disk and love it. Oem feel with just a tad of chatter at really low rpms. Id buy it again.

BBRSpeedWorks · 09-24-2014, 09:18 PM

Thanks guys I'll check into them...I get paid Tuesday and was going to build my exhaust but the clutch went alot sooner then I thought...I'll order it tuesday

BBRSpeedWorks · 09-24-2014, 09:19 PM

Quote:

Originally Posted by TopgunZ

This is awesome man. I need to figure out the maf situation.
I.have a southbend stage 3 quiet disk and love it. Oem feel with just a tad of chatter at really low rpms. Id buy it again.

How much boost r u pushing?

Rob298mx · 09-24-2014, 09:26 PM

The specialty Z setup is legit, Tony over at F.I got me into that setup

OldBoy · 09-24-2014, 10:27 PM

I'm running the Specialty Z clutch with 6 puck disc. That thing can handle a LOT of torque and abuse. As good as this clutch is, it sucks in bumper to bumper traffic and it makes my Z sound like a cement mixer on idle. If your Z isn't a DD, I'd say go for the puck style, otherwise, get the max street disc.

Prototyper5 · 09-25-2014, 12:01 AM

Nice bro'

~Reagan

BBRSpeedWorks · 09-25-2014, 06:42 PM

Quote:

Originally Posted by OldBoy

I'm running the Specialty Z clutch with 6 puck disc. That thing can handle a LOT of torque and abuse. As good as this clutch is, it sucks in bumper to bumper traffic and it makes my Z sound like a cement mixer on idle. If your Z isn't a DD, I'd say go for the puck style, otherwise, get the max street disc.

Quote:

Originally Posted by Rob298mx

The specialty Z setup is legit, Tony over at F.I got me into that setup

I'll check out the Specialty Z clutch. I want a 6 puck don't really care about a leg work out. Thank you for the suggestions.

Quote:

Originally Posted by Prototyper5

Nice bro'

~Reagan

Thanks

Ill · 09-25-2014, 07:06 PM

This is what I run, highly recommended.

ZSpeed Performance South Bend Complete Clutch Package Stage 3 Daily 370 G37 G35

09-23-2014, 06:30 PM	#121 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	here is a pic of my datalog from just a minute ago very very safe tune but look at the MAF's volts at 10psi i think i have the lowest of any kit out there.... Megan370z likes this.

09-23-2014, 10:02 PM	#123 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	barely 4volt at 10psi @6000rpm sound good what size is your MAF tube ? 2.75'' or 3'' ? __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me

09-23-2014, 10:11 PM	#124 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	3in with tall maf housings. .it only hit 4 volts a couple time mostly 3.92 Megan370z and megalapagas like this.

09-24-2014, 06:19 PM	#126 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I run this baby... South Bend Clutch Stage 2 Drag Clutch kit 6 Paddle Handles it just fine. BBRSpeedWorks likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

09-24-2014, 07:02 PM	#127 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Lots of people run this one and love it. Most of the FI turbo kits are mated to these http://specialtyz.com/shop/default/s...4-and-v36.html I personally run the Z1 full face and lite weight flywheel and have had no issues but I'm not reaching for 600whp. I'm probably more like 475-500 whp and 450ish wftlb BBRSpeedWorks and Rob298mx like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

09-23-2014, 06:39 PM	#122 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	and some more proof....maf look great now time to lean it out some and get some more HP...

09-24-2014, 06:17 PM	#125 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	just got of the phone with jon at Z1 and just sent him some logs and my map he is going to clean it up so it's not so rich...i'm pretty sure the stock clutch is about done...anyone know how much it can hold?...jon is also going to let me kno about when i can get on the dyno to...any one recommend any clutch thats not 2k...

09-24-2014, 09:14 PM	#128 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	This is awesome man. I need to figure out the maf situation. I.have a southbend stage 3 quiet disk and love it. Oem feel with just a tad of chatter at really low rpms. Id buy it again. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

09-24-2014, 09:18 PM	#129 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Thanks guys I'll check into them...I get paid Tuesday and was going to build my exhaust but the clutch went alot sooner then I thought...I'll order it tuesday

09-24-2014, 09:26 PM	#131 (permalink)
Rob298mx Base Member Join Date: Aug 2014 Location: NH Posts: 91 Drives: 2010 Nissan 370z Rep Power: 11	The specialty Z setup is legit, Tony over at F.I got me into that setup __________________ 2010 Nissan 370z F.I. TT

09-24-2014, 10:27 PM	#132 (permalink)
OldBoy Base Member Join Date: Feb 2012 Location: Ontario Posts: 61 Drives: '10 Nissan 370Z M6 Rep Power: 13	I'm running the Specialty Z clutch with 6 puck disc. That thing can handle a LOT of torque and abuse. As good as this clutch is, it sucks in bumper to bumper traffic and it makes my Z sound like a cement mixer on idle. If your Z isn't a DD, I'd say go for the puck style, otherwise, get the max street disc.

09-25-2014, 12:01 AM	#133 (permalink)
Prototyper5 Base Member Join Date: Oct 2013 Location: Orange County Posts: 48 Drives: 2009 370Z 7AT BASE Rep Power: 12	Nice bro' ~Reagan __________________ * FLINT♤LOGIC * - * PLU5 FIVE Research & Development * +5♤ * @plu5five #plu5five #flintlogic on IG

09-25-2014, 07:06 PM	#135 (permalink)
Ill Base Member Join Date: Mar 2012 Location: Bellevue Posts: 177 Drives: 09 370z Base 6MT Rep Power: 13	This is what I run, highly recommended. ZSpeed Performance South Bend Complete Clutch Package Stage 3 Daily 370 G37 G35 BBRSpeedWorks likes this. __________________ Old - GTM TT Stage 1 - 487whp / 415wtrq - bunch of goodies. New - 2011 Shelby GT500 - 2.3L VMP TVS - JLT CAI.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dan's VSR top-mount turbo 370 v3.0	FireDan50	Member's 370Z Gallery	163	05-19-2020 03:49 PM
1ST 7AT TOP MOUNT TURBO BUILD.. By S&R Performance	valpozguy	Forced Induction	83	04-27-2014 11:02 PM
Sts rear mount turbo	Ni55anPat	Wanted	3	12-22-2012 07:15 PM
Your dream system on a $1100 budget – Build it!	SP33DKILLS	Audio & Video	14	04-17-2012 03:12 AM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 03:53 PM