Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   My 5k budget mid mount turbo build (http://www.the370z.com/forced-induction/94189-my-5k-budget-mid-mount-turbo-build.html)

BBRSpeedWorks 09-23-2014 05:30 PM

here is a pic of my datalog from just a minute ago very very safe tune but look at the MAF's volts at 10psi i think i have the lowest of any kit out there....


http://i1291.photobucket.com/albums/...psrfftzggu.jpg

BBRSpeedWorks 09-23-2014 05:39 PM

and some more proof....maf look great now time to lean it out some and get some more HP...

http://i1291.photobucket.com/albums/...psghueq4i7.jpg
http://i1291.photobucket.com/albums/...psem5npc8b.jpg

Megan370z 09-23-2014 09:02 PM

barely 4volt at 10psi @6000rpm sound good ;)

what size is your MAF tube ? 2.75'' or 3'' ?

BBRSpeedWorks 09-23-2014 09:11 PM

3in with tall maf housings. .it only hit 4 volts a couple time mostly 3.92

BBRSpeedWorks 09-24-2014 05:17 PM

just got of the phone with jon at Z1 and just sent him some logs and my map he is going to clean it up so it's not so rich...i'm pretty sure the stock clutch is about done...anyone know how much it can hold?...jon is also going to let me kno about when i can get on the dyno to...any one recommend any clutch thats not 2k...

Mitco39 09-24-2014 05:19 PM

I run this baby...

South Bend Clutch Stage 2 Drag Clutch kit 6 Paddle

Handles it just fine.

jwick 09-24-2014 06:02 PM

Lots of people run this one and love it. Most of the FI turbo kits are mated to these

http://specialtyz.com/shop/default/s...4-and-v36.html

I personally run the Z1 full face and lite weight flywheel and have had no issues but I'm not reaching for 600whp. I'm probably more like 475-500 whp and 450ish wftlb

TopgunZ 09-24-2014 08:14 PM

This is awesome man. I need to figure out the maf situation.
I.have a southbend stage 3 quiet disk and love it. Oem feel with just a tad of chatter at really low rpms. Id buy it again.

BBRSpeedWorks 09-24-2014 08:18 PM

Thanks guys I'll check into them...I get paid Tuesday and was going to build my exhaust but the clutch went alot sooner then I thought...I'll order it tuesday

BBRSpeedWorks 09-24-2014 08:19 PM

Quote:

Originally Posted by TopgunZ (Post 2977512)
This is awesome man. I need to figure out the maf situation.
I.have a southbend stage 3 quiet disk and love it. Oem feel with just a tad of chatter at really low rpms. Id buy it again.

How much boost r u pushing?

Rob298mx 09-24-2014 08:26 PM

The specialty Z setup is legit, Tony over at F.I got me into that setup :tiphat:

OldBoy 09-24-2014 09:27 PM

I'm running the Specialty Z clutch with 6 puck disc. That thing can handle a LOT of torque and abuse. As good as this clutch is, it sucks in bumper to bumper traffic and it makes my Z sound like a cement mixer on idle. If your Z isn't a DD, I'd say go for the puck style, otherwise, get the max street disc.

Prototyper5 09-24-2014 11:01 PM

Nice bro'

~Reagan

BBRSpeedWorks 09-25-2014 05:42 PM

Quote:

Originally Posted by OldBoy (Post 2977587)
I'm running the Specialty Z clutch with 6 puck disc. That thing can handle a LOT of torque and abuse. As good as this clutch is, it sucks in bumper to bumper traffic and it makes my Z sound like a cement mixer on idle. If your Z isn't a DD, I'd say go for the puck style, otherwise, get the max street disc.

Quote:

Originally Posted by Rob298mx (Post 2977524)
The specialty Z setup is legit, Tony over at F.I got me into that setup :tiphat:

I'll check out the Specialty Z clutch. I want a 6 puck don't really care about a leg work out. Thank you for the suggestions.

Quote:

Originally Posted by Prototyper5 (Post 2977638)
Nice bro'

~Reagan

Thanks

Ill 09-25-2014 06:06 PM

This is what I run, highly recommended.

ZSpeed Performance South Bend Complete Clutch Package Stage 3 Daily 370 G37 G35


All times are GMT -5. The time now is 09:14 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2