GTM TWIN TURBO install at HP Logic

JoeD · 09-26-2009, 08:16 PM

Just to make sure...this is the same setup that made 611 RWHP on the G37 running 12-pounds on 100-octane?

westpak · 09-26-2009, 08:29 PM

Quote:

Originally Posted by JoeD

Just to make sure...this is the same setup that made 611 RWHP on the G37 running 12-pounds on 100-octane?

pretty much

G37Sam · 09-26-2009, 08:34 PM

Quote:

Originally Posted by JoeD

Just to make sure...this is the same setup that made 611 RWHP on the G37 running 12-pounds on 100-octane?

Quote:

Originally Posted by westpak@HPLogic

pretty much

Did you guys install the stage I (0.64a/r) or stage II kit (0.84a/r)?

Valentino · 09-26-2009, 08:54 PM

Quote:

Originally Posted by G37Sam

Did you guys install the stage I (0.64a/r) or stage II kit (0.84a/r)?

Quote:

Originally Posted by westpak@HPLogic

Thanks, they are the Stage 2

LOL sure anything you want

with the .86 and we are Cobb Tuners

injectirs are 600cc

G37Sam · 09-26-2009, 08:57 PM

Sorry I missed on that post

Valentino · 09-26-2009, 09:02 PM

Good job Horsepower Logic.

Questions:

How is the rubber elbow holding @ 7.5psi(the one on the top left of the inter cooler)?

Would that rubber hoes take the heat and abuse of higher boost in the long run with out coming off or get damaged?

Thanks

westpak · 09-26-2009, 10:47 PM

Quote:

Originally Posted by Valentino

Good job Horsepower Logic.

Questions:

How is the rubber elbow holding @ 7.5psi(the one on the top left of the inter cooler)?

Would that rubber hoes take the heat and abuse of higher boost in the long run with out coming off or get damaged?

Thanks

well tough to tell since so far it has only been a few pulls on the dyno, but it held up fine with no obvious bulging, if that is your concern, it is pretty thick and as for heat, it wont see any more heat than the rest of the plastic/rubber parts in the engine bay.

it is similar if not the same as the parts used in the Injen cold air intakes.

Valentino · 09-26-2009, 11:17 PM

The OEM rubbers, plastics, and the Injen cold air intakes will never go throw the pressure that this rubber elbow will go throw.

anyway. time will tell. and this is an easy fix. exchange it with a metal elbow, for more reliability.

Peace.

westpak · 09-26-2009, 11:38 PM

here are a couple of more pics

one of the custom exhaust

SAM@GTM · 09-26-2009, 11:44 PM

Quote:

Originally Posted by Valentino

The OEM rubbers, plastics, and the Injen cold air intakes will never go throw the pressure that this rubber elbow will go throw.

anyway. time will tell. and this is an easy fix. exchange it with a metal elbow, for more reliability.

Peace.

FYI

GTM 4-Ply High Resistance Nomex Silicon couplers specification

Material: Premium Silicone Compound / Nomex (Aramid) ply reinforcement.

Temperature Rating: Manufactured to SAE J20 standards. Operating temperatures from 65° F to 500°F (-54° C to 260°C)

Pressure Rating: 250 PSI.

Sam

Supergoji · 09-27-2009, 12:48 AM

Quote:

Originally Posted by westpak@HPLogic

well the VQ breaths way better and has higher compression than the VG, having owned one you will know that you need about 20 psi for the same numbers we got with only 7.5 psi on the 370Z, this put the horsepower where we felt comfortable with on a stock block, it was almost doubled from stock.

well the VQ has .7 liter on the VG, 11:1 compression instead of 8.5. so thats where the power over the VG is coming from.

nice install and power. i was expecting to see more though

Valentino · 09-27-2009, 01:22 AM

Quote:

Originally Posted by SAM@GTM

FYI

GTM 4-Ply High Resistance Nomex Silicon couplers specification

Material: Premium Silicone Compound / Nomex (Aramid) ply reinforcement.

Temperature Rating: Manufactured to SAE J20 standards. Operating temperatures from 65° F to 500°F (-54° C to 260°C)

Pressure Rating: 250 PSI.

Sam

So that rubber elbow won't leak air or come off under high boost?

370zdub · 09-27-2009, 02:40 AM

What rims are on this car? They have a great look to them. Also great job with the install looks factory with everything bolted back up. Can't as for much more as far as fit and finish go!

westpak · 09-27-2009, 09:56 AM

Quote:

Originally Posted by Valentino

So that rubber elbow won't leak air or come off under high boost?

If the clamps are on tight it shouldn't just like any of the couplings

Quote:

Originally Posted by 370zdub

What rims are on this car? They have a great look to them. Also great job with the install looks factory with everything bolted back up. Can't as for much more as far as fit and finish go!

They are Volk GT30 Phantom Edition

SAM@GTM · 09-27-2009, 01:35 PM

Quote:

Originally Posted by Valentino

So that rubber elbow won't leak air or come off under high boost?

Not at all, not to mention that we supply T-Bolt clamps which are proven hardware for high boost applications

Sam

09-26-2009, 08:57 PM	#65 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Sorry I missed on that post __________________ '14 Viper GTS '08 RB'd G37S - Sold

09-26-2009, 09:02 PM	#66 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 305	Good job Horsepower Logic. Questions: How is the rubber elbow holding @ 7.5psi(the one on the top left of the inter cooler)? Would that rubber hoes take the heat and abuse of higher boost in the long run with out coming off or get damaged? Thanks Last edited by Valentino; 09-26-2009 at 09:10 PM. Reason: fix the question

09-26-2009, 11:38 PM	#69 (permalink)
westpak Enthusiast Member Join Date: Mar 2009 Location: Lake Worth, FL Posts: 405 Drives: 2003 350Z DB Rep Power: 16	here are a couple of more pics one of the custom exhaust __________________ 03 350Z 587 RWHP - May 2009 Dsport Feature

09-27-2009, 02:40 AM	#73 (permalink)
370zdub Track Member Join Date: Jun 2009 Location: UT Posts: 628 Drives: 09 370z 6mt,10 Ford Rep Power: 17	What rims are on this car? They have a great look to them. Also great job with the install looks factory with everything bolted back up. Can't as for much more as far as fit and finish go! __________________ 2010 Ford 6.4L Power Stroke Diesel: 588whp/1082wtrq 2007 Dodge 6.7L Cummins Diesel: 788whp/1405wtrq, runs 12's @ 7400lbs, Still miss my 370z!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM VQ37 Twin Turbo Kit!	Clint@Altered	Forced Induction	114	12-01-2009 09:58 PM
Which Twin Turbo kit???	ErnieT	Forced Induction	54	08-30-2009 01:53 PM
Which Color to Twin Turbo??	FuszNissan	Nissan 370Z General Discussions	74	08-28-2009 10:24 AM
Twin Turbo Dates?	SgtGoldy	Nissan 370Z General Discussions	30	08-20-2009 11:38 AM

09-26-2009, 08:16 PM	#61 (permalink)
JoeD Banned Join Date: Aug 2009 Location: CA Posts: 495 Drives: Z Rep Power: 0	Just to make sure...this is the same setup that made 611 RWHP on the G37 running 12-pounds on 100-octane?

09-26-2009, 11:17 PM	#68 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 305	The OEM rubbers, plastics, and the Injen cold air intakes will never go throw the pressure that this rubber elbow will go throw. anyway. time will tell. and this is an easy fix. exchange it with a metal elbow, for more reliability. Peace.