So just ordered my Stillen SC

gussyturbo z · 06-16-2014, 08:36 PM

Quote:

Originally Posted by future370zzz

I recommend the impeller upgrade also. You will eventually want more out of the kit, might as well save time on the install and downtime on the car. Plus the bump in torque and HP through out the entire RPM band is not bad either.

I would tune it after install since the base Stillen tune will not give you much power and run rich likely. You can still break it in with a proper tune. Might as well save the 60 miles of gas on the tune as well.

My tuner dyno and road tuned my car extensively and did go through a whole tank of gas. I also told him to thorough run the kit for any problems since I didn't want to deal with them on the side of the road. He had to tune my AT line pressures as well so that increase the gas usage. If you're just doing dyno tuning, they probably won't go through a whole tank.

Who sells the impeller and what's it called? I been interested in going this route.

gussyturbo z · 06-16-2014, 08:40 PM

Quote:

Originally Posted by DEpointfive0

You is correct.

Correct me if I'm wrong, the impeller upgrade is the better overall upgrade, because instead of using more power to drive the SC, the air just has better flow...?

Where do I get this impeller?

future370zzz · 06-16-2014, 08:53 PM

The Vortech SI impeller upgrade requires you to send the blower unit in and they replace it for you and check for any issues. Check out the Vortech site for complete details. Its about $350 plus shipping. http://www.vortechsuperchargers.com/page.php?id=13896

There is also the 928 motorsports impeller upgrade but I heard mix responses because some say it doesn't quite fit and others have made it work. I just went with OEM and called it a day.

1slow370 · 06-17-2014, 02:03 AM

i beieve the 928 impellar requires you to also instal the si impellar cover, the sci cover it the wrong trim

vlad370z · 06-17-2014, 07:24 AM

Quote:

Originally Posted by future370zzz

the vortech si impeller upgrade requires you to send the blower unit in and they replace it for you and check for any issues. Check out the vortech site for complete details. Its about $350 plus shipping. Vortech Superchargers: Only Authorized Service Center | Vortech Superchargers

there is also the 928 motorsports impeller upgrade but i heard mix responses because some say it doesn't quite fit and others have made it work. I just went with oem and called it a day.

you guys get it good, to upgrade here in aussie is over au$1000 plus shipping

mikey1600 · 06-17-2014, 08:43 AM

Okay so I've also ordered the frozenboost heat exchanger + motul mocool

vlad370z · 06-17-2014, 09:12 AM

Quote:

Originally Posted by mikey1600

okay so i've also ordered the frozenboost heat exchanger + motul mocool :d

good move

gussyturbo z · 06-19-2014, 11:01 PM

Quote:

Originally Posted by future370zzz

The Vortech SI impeller upgrade requires you to send the blower unit in and they replace it for you and check for any issues. Check out the Vortech site for complete details. Its about $350 plus shipping. Vortech Superchargers: Only Authorized Service Center | Vortech Superchargers

There is also the 928 motorsports impeller upgrade but I heard mix responses because some say it doesn't quite fit and others have made it work. I just went with OEM and called it a day.

Ok thanks! I'm guessing I'm gonna need a retune too right?

future370zzz · 06-20-2014, 01:16 PM

^Yes, with changes to boost level, definitely.

ANMVQ · 06-20-2014, 02:40 PM

Quote:

Originally Posted by gussyturbo z

Ok thanks! I'm guessing I'm gonna need a retune too right?

yea you'll see at least 2 more PSI up top but mid range will be more like 4-6 PSI, you will build boost sooner in the RPM band. Retune for sure

mikey1600 · 06-21-2014, 12:38 PM

Shipping is estimated to arrive Friday 27th according to tracking! (please please no delays!) so will get started on Friday as soon as it arrives.

I've got my tune booked/penciled in for the Monday morning 30th!

I've been told I don't need to drop my oil/coolant to do install. As my car is due for a service, I will be doing this on Monday, but I've also been told I'll need to add some oil/coolant once the kit is installed. Does anyone know how much roughly? as I'll get some extra while at the dealer.

So far with the tune, couple things I'm going to get checked/done;
1. Have the fans come on a bit earlier temp wise.
2. Get them to do some hot starts and make sure I don't have a hot start issue.
3. Some vvel tuning if they are comfortable.
Anything else I should definitely be getting done that's kind of not a normal thing?

tirespin782 · 06-21-2014, 12:41 PM

I lurk here quite a bit and thought I'd offer this 0.02 cents. The V-7 YSi has the same bolt pattern and pushes nearly 40% more cfm.

edit: typo with the v-7. Thanks 1slow370

1slow370 · 06-21-2014, 12:47 PM

V7

Sent from my HTCONE using Tapatalk

future370zzz · 06-21-2014, 12:49 PM

If you plan to run test pipes, have them disable the map sensor trigger under DTC controls. My car throws a CEL every once in a while when I mash on it. It's not suppose to see boost so it throws a CEL p0106 code.

Sent from my iPad using Tapatalk

mikey1600 · 06-21-2014, 12:54 PM

Quote:

Originally Posted by future370zzz

If you plan to run test pipes, have them disable the map sensor trigger under DTC controls. My car throws a CEL every once in a while when I mash on it. It's not suppose to see boost so it throws a CEL p0106 code.

Sent from my iPad using Tapatalk

Been running Berk HFC's for about 2.5 years and never had a CEL, still get this disabled? as I'm guessing the HFC's will burn out eventually anyway?

06-16-2014, 08:53 PM	#63 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	The Vortech SI impeller upgrade requires you to send the blower unit in and they replace it for you and check for any issues. Check out the Vortech site for complete details. Its about $350 plus shipping. http://www.vortechsuperchargers.com/page.php?id=13896 There is also the 928 motorsports impeller upgrade but I heard mix responses because some say it doesn't quite fit and others have made it work. I just went with OEM and called it a day. DEpointfive0 likes this. __________________

06-17-2014, 02:03 AM	#64 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	i beieve the 928 impellar requires you to also instal the si impellar cover, the sci cover it the wrong trim __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

06-17-2014, 08:43 AM	#66 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	Okay so I've also ordered the frozenboost heat exchanger + motul mocool ANMVQ likes this.

06-20-2014, 01:16 PM	#69 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	^Yes, with changes to boost level, definitely. __________________

06-21-2014, 12:41 PM	#72 (permalink)
tirespin782 Base Member Join Date: Dec 2012 Location: The Alamo city Posts: 8 Drives: 08 350z M6 Rep Power: 12	I lurk here quite a bit and thought I'd offer this 0.02 cents. The V-7 YSi has the same bolt pattern and pushes nearly 40% more cfm. edit: typo with the v-7. Thanks 1slow370 Last edited by tirespin782; 06-21-2014 at 02:50 PM.

06-21-2014, 12:38 PM	#71 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	Shipping is estimated to arrive Friday 27th according to tracking! (please please no delays!) so will get started on Friday as soon as it arrives. I've got my tune booked/penciled in for the Monday morning 30th! I've been told I don't need to drop my oil/coolant to do install. As my car is due for a service, I will be doing this on Monday, but I've also been told I'll need to add some oil/coolant once the kit is installed. Does anyone know how much roughly? as I'll get some extra while at the dealer. So far with the tune, couple things I'm going to get checked/done; 1. Have the fans come on a bit earlier temp wise. 2. Get them to do some hot starts and make sure I don't have a hot start issue. 3. Some vvel tuning if they are comfortable. Anything else I should definitely be getting done that's kind of not a normal thing?

06-21-2014, 12:47 PM	#73 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	V7 Sent from my HTCONE using Tapatalk __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

06-21-2014, 12:49 PM	#74 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	If you plan to run test pipes, have them disable the map sensor trigger under DTC controls. My car throws a CEL every once in a while when I mash on it. It's not suppose to see boost so it throws a CEL p0106 code. Sent from my iPad using Tapatalk __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just ordered my Stillen CBE	carmelvalleyZ	Intake/Exhaust	12	03-23-2014 03:20 PM
Just ordered a 1LE	280z/300zx	Other Vehicles	4	08-18-2013 02:05 PM
Just ordered Stillen gen 3 cai	henryy370z	Intake/Exhaust	3	08-02-2012 10:03 PM
just ordered!	nj2alaska	New 370Z Owner	9	07-21-2011 04:18 AM
Stillen CBE and Berk HFC ordered	Nitex	Intake/Exhaust	19	02-07-2010 08:45 AM