Stillen Results...

ART_Auto · 06-07-2014, 05:20 AM

It was where the air filters were sitting that we had to move. The MAF voltages were unbalanced when you put the big fan on it like you were driving.

The only cats I have are Berk Sports cats. If I put them on I am assuming I am going to have to tweak the map?

Alternatively, would putting restrictor rings in the exhaust help lift the pressure?

JWillis72 · 06-07-2014, 10:12 AM

Quote:

Originally Posted by ART_Auto

It was where the air filters were sitting that we had to move. The MAF voltages were unbalanced when you put the big fan on it like you were driving.

The only cats I have are Berk Sports cats. If I put them on I am assuming I am going to have to tweak the map?

Alternatively, would putting restrictor rings in the exhaust help lift the pressure?

If the MAFs were unbalanced I would guess you left the plastic piece off that mounts to the bumper and blocks air from the lower filter. The guys who installed mine did that.

ART_Auto · 06-07-2014, 10:21 AM

Quote:

Originally Posted by JWillis72

If the MAFs were unbalanced I would guess you left the plastic piece off that mounts to the bumper and blocks air from the lower filter. The guys who installed mine did that.

Nope, it was a metal shield and I did the installation myself and did everything in the instructions.

We then ran tests on the MAF, tried new ones, tried different positions monitoring. Only balanced place we could get was left side front bumper.

JWillis72 · 06-07-2014, 10:58 AM

Quote:

Originally Posted by ART_Auto

Nope, it was a metal shield and I did the installation myself and did everything in the instructions.

We then ran tests on the MAF, tried new ones, tried different positions monitoring. Only balanced place we could get was left side front bumper.

You did better than the shop that installed mine then. I had to build my own because that one wasn't wide enough, If I coasted down an off ramp air would get around it so I made a wider one the that wraps below and up behind the lower filter and haven't had a problem since.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen 3 Intake + Nismo - My Install Results	torpedo2k	Nismo 370Z	10	03-14-2015 06:49 PM
Full Stillen Bolt Ons + Berk Cats and UpRev Tune Results...	chuckd05	Tuning	38	10-17-2013 03:19 PM
stillen superchge build results	Nissan370	Forced Induction	68	02-13-2012 04:23 PM
GTM and Stillen SC Install Facts and Results Thread	dal1307	Forced Induction	48	03-08-2011 12:36 PM
Stillen G3's those who own with real results please Chime in	BOLIO 671	Intake/Exhaust	54	09-27-2010 02:39 PM

06-07-2014, 05:20 AM	#1 (permalink)
ART_Auto Base Member Join Date: Mar 2014 Location: Glasgow, UK Posts: 43 Drives: 370z Rep Power: 12	It was where the air filters were sitting that we had to move. The MAF voltages were unbalanced when you put the big fan on it like you were driving. The only cats I have are Berk Sports cats. If I put them on I am assuming I am going to have to tweak the map? Alternatively, would putting restrictor rings in the exhaust help lift the pressure?