Brake Boosting

phunk · 07-12-2014, 07:21 PM

Thanks. Updated my posts to say pink instead of purple.

V1H · 07-13-2015, 04:59 AM

For everybody's general information..

Below sketch explains why intercepting the Pink wire at T122 is better than pulling Fuse No. 7. I traced back what else gets deactivated by pulling the fuse. As we can see, it both disables the rear brake lights and signalling the ABS actuator control unit.
I found out the other end of the pink wire terminates at terminal 3B of connector M2 of the driver side Fuse Box. I find this very helpful because it's much easier to intercept the pink wire at Connector M2 than on connector M107 of the ECM. All I needed was 30cm of 2-core wire running to a switch that I conveniently placed on the trim panel underneath the steering column.

jax4557 · 05-23-2016, 02:32 PM

Quote:

Originally Posted by phunk

Thanks. Updated my posts to say pink instead of purple.

Sorry to revive an old thread but im trying to find some answers to this. I have intercepted the pink wire in the front most connector to the ECU (furthest away from firewall) and upon hitting the brake I see 12v on one side and nothing on the other side so I feel its the correct wire but disconnected I still get throttle cut during brake + gas... any ideas?

I soldered and heat shrunk the wires and the electrical tape is temporary until I bundle and reinstall glove box)

phunk · 05-23-2016, 03:36 PM

That is strange!

Anyone else with a 2014 able to comment on if this no longer works on this model year? We can see from V1H post that it still works on a 2013, but its entirely possible Nissan changed something for 2014.

V1H · 05-23-2016, 04:16 PM

That would be a bummer m8
To be fair I'm not really using brake boosting at all; could do w/o it, too.

Sent from my iPhone using Tapatalk

jax4557 · 05-23-2016, 04:21 PM

I just feel like it would be an asset to have and to warm tires at the track. It really seems like 2014 has a change because I promise my cut is still present.

On a side not does this look like the correct rpm wave source for my aem Uego failsafe?

katjmmx · 08-29-2016, 03:22 PM

Just did this awesome hack on my 09 TT nismo and it definitely works! Brake boosting is a game changer. But did anyone have issues with the windows not going up automatically anymore? They'll roll down automatically but not up. Tried resetting the windows a bunch of times, no luck. Any suggestions?

phunk · 08-29-2016, 03:38 PM

Quote:

Originally Posted by katjmmx

Just did this awesome hack on my 09 TT nismo and it definitely works! Brake boosting is a game changer. But did anyone have issues with the windows not going up automatically anymore? They'll roll down automatically but not up. Tried resetting the windows a bunch of times, no luck. Any suggestions?

Thats gonna be an unrelated issue! Sometimes its a hassle to get them to reset. Its been a really long time since I did it, but dont you have to set them at the top, and at the bottom?

katjmmx · 08-29-2016, 03:45 PM

Quote:

Originally Posted by phunk

Thats gonna be an unrelated issue! Sometimes its a hassle to get them to reset. Its been a really long time since I did it, but dont you have to set them at the top, and at the bottom?

I reset them at the top and bottom, heard the clicks, reset with the switch on and off, nothing. I tried just about every variation of window resetting here on the forum. The switch went in Friday night and I thought by today I might be able to reset. It probably is unrelated but I never had this problem before the switch went in so figured I'd ask. I'll disconnect the battery again tonight and keep trying.

BOLIO 671 · 09-21-2016, 09:19 AM

This will work for waterbox burnouts at the track right? To be able to do something get like this?

katjmmx · 09-21-2016, 11:24 AM

Quote:

Originally Posted by BOLIO 671

This will work for waterbox burnouts at the track right? To be able to do something get like this?

Yup works great for burnouts

BOLIO 671 · 09-21-2016, 10:41 PM

Awesome...finally a solution

BOLIO 671 · 09-24-2016, 03:27 AM

Just discovered that u can avoid all the re-wirings and fusepulling with EcuTek's software which allows u (via tuner) to Hijack the Throttle. Here's a vid of the Throttle Hijack enabled. Thnx to Seb @ Specialty Z.

dboi941 · 10-21-2016, 04:20 PM

Just tried this on a 2016 370z Nismo and can confirm it no longer works. Yes used the right wire and yes Traction control was off.
Has anyone found a work around for new 370s?

phunk · 10-21-2016, 05:51 PM

If anyone can post a 2016 service manual i will see if I can figure out why it no longer works. I am assuming they are no longer getting the brake switch signal straight from the switch now... its probably trickling in through the CAN now or something.

07-12-2014, 07:21 PM	#16 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974723	Thanks. Updated my posts to say pink instead of purple. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

07-13-2015, 04:59 AM	#17 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	For everybody's general information.. Below sketch explains why intercepting the Pink wire at T122 is better than pulling Fuse No. 7. I traced back what else gets deactivated by pulling the fuse. As we can see, it both disables the rear brake lights and signalling the ABS actuator control unit. I found out the other end of the pink wire terminates at terminal 3B of connector M2 of the driver side Fuse Box. I find this very helpful because it's much easier to intercept the pink wire at Connector M2 than on connector M107 of the ECM. All I needed was 30cm of 2-core wire running to a switch that I conveniently placed on the trim panel underneath the steering column. Jordo! and street2soul like this. __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

05-23-2016, 03:36 PM	#19 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974723	That is strange! Anyone else with a 2014 able to comment on if this no longer works on this model year? We can see from V1H post that it still works on a 2013, but its entirely possible Nissan changed something for 2014. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

05-23-2016, 04:16 PM	#20 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	That would be a bummer m8 To be fair I'm not really using brake boosting at all; could do w/o it, too. Sent from my iPhone using Tapatalk __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

08-29-2016, 03:22 PM	#22 (permalink)
katjmmx Base Member Join Date: Jun 2014 Location: VA Posts: 89 Drives: 09 Z34 TT E85 6MT Rep Power: 31	Just did this awesome hack on my 09 TT nismo and it definitely works! Brake boosting is a game changer. But did anyone have issues with the windows not going up automatically anymore? They'll roll down automatically but not up. Tried resetting the windows a bunch of times, no luck. Any suggestions? __________________ 09 Z34 N #0060 F.I. #044 MA-Motorsports Fast Intentions EcuTek JWT ATS-Japan

05-23-2016, 04:21 PM	#21 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 11	I just feel like it would be an asset to have and to warm tires at the track. It really seems like 2014 has a change because I promise my cut is still present. On a side not does this look like the correct rpm wave source for my aem Uego failsafe?

09-21-2016, 09:19 AM	#25 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	This will work for waterbox burnouts at the track right? To be able to do something get like this? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

09-21-2016, 10:41 PM	#27 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Awesome...finally a solution __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

09-24-2016, 03:27 AM	#28 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Just discovered that u can avoid all the re-wirings and fusepulling with EcuTek's software which allows u (via tuner) to Hijack the Throttle. Here's a vid of the Throttle Hijack enabled. Thnx to Seb @ Specialty Z. Jshvr and V1H like this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

10-21-2016, 04:20 PM	#29 (permalink)
dboi941 Base Member Join Date: Nov 2015 Location: Bradenton, FL Age: 42 Posts: 24 Drives: 2016 370z Nismo Rep Power: 10	Just tried this on a 2016 370z Nismo and can confirm it no longer works. Yes used the right wire and yes Traction control was off. Has anyone found a work around for new 370s?

10-21-2016, 05:51 PM	#30 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974723	If anyone can post a 2016 service manual i will see if I can figure out why it no longer works. I am assuming they are no longer getting the brake switch signal straight from the switch now... its probably trickling in through the CAN now or something. SouthArk370Z likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part out: Oil cooler, brake cooling, sway bars, brake pads etc.	JB1	Parts for sale (Private Classifieds)	36	05-05-2014 09:19 AM
NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit	DLo	Brakes & Suspension	24	09-17-2013 02:10 AM
Brake/Throttle Interlock disable - Left Foot Brake enable	///MSH	Track / Autocross / Drifting / Dragstrip	1	08-15-2013 11:31 AM
Brake light on dash while boosting	axio	Engine & Drivetrain	17	05-24-2012 06:52 PM
clicking sound when pressing brake pedal = brake booster problem?	doubleG370Z	Brakes & Suspension	1	08-30-2010 07:49 PM