Brake Boosting

V1H

For everybody's general information..

Below sketch explains why intercepting the Pink wire at T122 is better than pulling Fuse No. 7. I traced back what else gets deactivated by pulling the fuse. As we can see, it both disables the rear brake lights and signalling the ABS actuator control unit.
I found out the other end of the pink wire terminates at terminal 3B of connector M2 of the driver side Fuse Box. I find this very helpful because it's much easier to intercept the pink wire at Connector M2 than on connector M107 of the ECM. All I needed was 30cm of 2-core wire running to a switch that I conveniently placed on the trim panel underneath the steering column.

__________________
501 BHP, 590 Nm (422 rwhp) AAM TT+I/Plenum|CJM S1 FRS|C/Clutch Stage 2|RJM CMC|ZSpeed CSC|Z1 Oil cooler|Motordyne Turbo ShockWave)))|Torqen Coilovers|Stanceparts AirCups|Amuse bodykit|GReddy|AEM|ONEighty|Mishimoto|STILLEN|Eibach|SPL|B&M|Radium|EcuTek|BC Forged RS45