Boosted Performance V 2.0

Boosted Performance · 03-11-2015, 09:51 PM

Quote:

Originally Posted by YzGyz

I'm having a problem with the FMIC fitment. The brackets on the FMIC and on the car don't line up. Anyone else have this problem? Did I somehow mess up this simple step? I don't wan to drill holes at random then make it impossible to correctly hook up the hard pipes. I was planning to install everything and leave the FMIC last. Once everything is lined up, I mark then drill the FMIC.

Video below.

https://www.youtube.com/watch?v=ABDc...ature=youtu.be

YzGyz

That is a first. I had an issue with some other intercoolers because the mounting brackets were only 1" vs. 2.5" on these intercoolers. That was something different.

This is very different. The way your intercooler sits in the video is in the correct position. The middle of the intercooler is lined up with the centre rad support. The easiest way to get around this is to drill four new holes in the brackets.

The other option is for me to send you a new set of brackets, but I would need you to measure the hole offset.

Also, I would not bother cutting those mounting braces back. It won't make any difference.

I am always available on email as well for any issues you guys may come across during the install process. I reply rather quickly to you guys.

Gajewski · 03-11-2015, 10:06 PM

Quote:

Originally Posted by Boosted Performance

I am always available on email as well for any issues you guys may come across during the install process. I reply rather quickly to you guys.

That you do, thank you for your help and great customer service.

SlowZ · 03-11-2015, 10:24 PM

Quote:

Originally Posted by Boosted Performance

That is a first. I had an issue with some other intercoolers because the mounting brackets were only 1" vs. 2.5" on these intercoolers. That was something different.

This is very different. The way your intercooler sits in the video is in the correct position. The middle of the intercooler is lined up with the centre rad support. The easiest way to get around this is to drill four new holes in the brackets.

The other option is for me to send you a new set of brackets, but I would need you to measure the hole offset.

Also, I would not bother cutting those mounting braces back. It won't make any difference.

I am always available on email as well for any issues you guys may come across during the install process. I reply rather quickly to you guys.

yeah seriously, I would get replies like a minute after I sent my email lol. Customer service is above and beyond what most other companies would do

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 09:38 AM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 08:44 AM
Joepro's Boosted Performance build thread!	Joepro	Member's 370Z Gallery	82	04-16-2014 11:09 AM
For you guys that want to know what the Boosted Performance kit sounds like :)	Mitco39	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	04-10-2013 01:26 PM