Boosted Performance V 2.0

victorofhavoc · 10-03-2014, 03:21 PM

Quote:

Originally Posted by jwick

You also want to make sure you know what fuel is being ran. Both the cars in my post are running 93. If the FI TT kit is running E85 the torque will come on much earlier because you can run more aggressive timing. The only real way to compare kits is to have them truly side by side, like in my comparison (same dyno, same tuner, stock block, etc.). I'd love to see how a similar built FI kit compares to mine but unfortunately there aren't any in Houston.

It was the 91 oct map I was looking at. The torque fell off a lot sooner versus the above which holds torque at an almost constant place in the upper band. Yeah I would love to see a direct comparison of the two kits. I'm sure they would be very similar and very different in a lot of ways. Here's the image I was looking at btw: http://fastintentions.com/images/370z/370zflyer_01.jpg

I just love the fact the BP kit is so DIY friendly...the FI kit looks like pulling the engine for the install would be easier than trying to do it with the engine in the engine bay

jwick · 10-03-2014, 03:44 PM

Quote:

Originally Posted by victorofhavoc

It was the 91 oct map I was looking at. The torque fell off a lot sooner versus the above which holds torque at an almost constant place in the upper band. Yeah I would love to see a direct comparison of the two kits. I'm sure they would be very similar and very different in a lot of ways. Here's the image I was looking at btw: http://fastintentions.com/images/370z/370zflyer_01.jpg

I just love the fact the BP kit is so DIY friendly...the FI kit looks like pulling the engine for the install would be easier than trying to do it with the engine in the engine bay

DIYing it is the main reason I'm in the boosted club. I was either going to live with NA or move onto another platform until I stumbled across Sasha's kit. Took me a lot of research and time spent on the lift until I was comfortable it would actually fit on a G37 but obviously I pulled the trigger, cuz here I am with the first BP G37.

DIYing a TT kit, although possible, would be a mountain of an undertaking. With the limited space I wouldn't feel completely comfortable I got everything installed properly without pulling the motor. Tony's kit is fantastic and I have nothing bad to say about it but I wasn't in the market for it because I didn't want to pay someone else to install it.

You are always going to have pro's and con's for any FI setup. Some things TT does better and some things Twin Scroll Single does better.

victorofhavoc · 10-03-2014, 04:33 PM

Quote:

Originally Posted by jwick

DIYing it is the main reason I'm in the boosted club. I was either going to live with NA or move onto another platform until I stumbled across Sasha's kit. Took me a lot of research and time spent on the lift until I was comfortable it would actually fit on a G37 but obviously I pulled the trigger, cuz here I am with the first BP G37.

DIYing a TT kit, although possible, would be a mountain of an undertaking. With the limited space I wouldn't feel completely comfortable I got everything installed properly without pulling the motor. Tony's kit is fantastic and I have nothing bad to say about it but I wasn't in the market for it because I didn't want to pay someone else to install it.

You are always going to have pro's and con's for any FI setup. Some things TT does better and some things Twin Scroll Single does better.

Yeah, that's why I'm doing a lot of comparison stuff now. I know I'll eventually boost the Z since I had a boosted car before and it's just too easy to make power. Fortunately I moved to a platform that doesn't rip apart your engine and transmission when you go over 350 whp! haha. Subarus are a nightmare...never again...

I have a small request for you sir. If you ever do any in car vids can you do one in 2nd gear from 10 mph to 6k rpm? I'm just curious to see if it's quite noticeable when the turbo spools or if it's very linear. My wrx drove me insane with the slingshot like acceleration through corners :/

YzGyz · 10-03-2014, 04:33 PM

Is there an installation pdf file available for this V 2.0 kit? I would like to read it a few times. Ok ok, I confess, I was only going to look at the pictures over and over again until the bottom corner wear out from excessive page flipping. Yes, such things are possible on pdf files if you do it enough times.

jwick · 10-03-2014, 05:03 PM

Quote:

Originally Posted by YzGyz

Is there an installation pdf file available for this V 2.0 kit? I would like to read it a few times. Ok ok, I confess, I was only going to look at the pictures over and over again until the bottom corner wear out from excessive page flipping. Yes, such things are possible on pdf files if you do it enough times.

The install is going to be 95% the same. Just download the instructions from the V1 kit at the beginning of the the other thread

YzGyz · 10-03-2014, 05:27 PM

Found it!! That took me a little bit of searching.

Boosted Performance Instructions

Boosted Performance · 10-03-2014, 05:28 PM

Keep in mind that the dyno graph is essentially a tuners signature....so for comparison here is another...and please note that 10psi of boost is reached at 3,500rpm. So if the boost pressure is there, and the power torque is not (when comparing kits) then it is a timing/tuner thing:

Hope that helps. Also, I do not have any "shop" dyno runs. All these are from customer and tuners from around North America.

As for the install, the V 2.0 is easier to install than the original V 1. The V 1.5 is the same when it comes to the install as the V 2.0.

jwick · 10-03-2014, 06:11 PM

^^^^ this

That's why I posted my graph because it was the same tuner and same goals, safe power for stock block.

victorofhavoc · 10-04-2014, 10:29 AM

Quote:

Originally Posted by Boosted Performance

Keep in mind that the dyno graph is essentially a tuners signature....so for comparison here is another...and please note that 10psi of boost is reached at 3,500rpm. So if the boost pressure is there, and the power torque is not (when comparing kits) then it is a timing/tuner thing:

Hope that helps. Also, I do not have any "shop" dyno runs. All these are from customer and tuners from around North America.

As for the install, the V 2.0 is easier to install than the original V 1. The V 1.5 is the same when it comes to the install as the V 2.0.

That's the exact information I was looking for. The above dyno is exactly what I would want out of the kit.

Now it's time to start saving money for it! Haha

Thanks for the info sasha.

jwick · 10-09-2014, 10:49 AM

Any update from the powder coater?

Boosted Performance · 10-09-2014, 11:47 AM

Quote:

Originally Posted by jwick

Any update from the powder coater?

Will be picking them up tomorrow morning. Not sure why it took this long...usually the turnaround time is much quicker than this.

Boosted Performance · 10-11-2014, 02:35 AM

Finally:

Will be packing them up this weekend, so if you are looking to make the switch to the V 1.5, please let me know.

As mentioned before, the upgrade will include the following items:

New turbo to FMIC pipes
New turbo compressor cover
New air filter
New thermostatic sandwich plate
New OEM (Mobil) oil filter
One new oil line
One new 90 degree silicone coupler (others are re-used)
One turbine inlet gasket (the turbo has to be removed for the switch)

LMBmikeZ · 10-11-2014, 05:55 AM

GaleForce · 10-11-2014, 08:05 AM

Quote:

Originally Posted by Boosted Performance

Finally:

Will be packing them up this weekend, so if you are looking to make the switch to the V 1.5, please let me know.

As mentioned before, the upgrade will include the following items:

New turbo to FMIC pipes
New turbo compressor cover
New air filter
New thermostatic sandwich plate
New OEM (Mobil) oil filter
One new oil line
One new 90 degree silicone coupler (others are re-used)
One turbine inlet gasket (the turbo has to be removed for the switch)

Remind me what the main benefit to this is? Less oil lines, no oil filter relocation, easier installation and removal of the turbo. Anything else?

Intake pipes remain the same?

Boosted Performance · 10-11-2014, 11:29 AM

Quote:

Originally Posted by GaleForce

Remind me what the main benefit to this is? Less oil lines, no oil filter relocation, easier installation and removal of the turbo. Anything else?

Intake pipes remain the same?

Yup, that sums it up. There is a slight increase in flow as well since this conversion eliminates the elbow on the compressor outlet.

10-03-2014, 05:27 PM	#246 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Found it!! That took me a little bit of searching. Boosted Performance Instructions 370zrider likes this.

10-03-2014, 05:28 PM	#247 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Keep in mind that the dyno graph is essentially a tuners signature....so for comparison here is another...and please note that 10psi of boost is reached at 3,500rpm. So if the boost pressure is there, and the power torque is not (when comparing kits) then it is a timing/tuner thing: Hope that helps. Also, I do not have any "shop" dyno runs. All these are from customer and tuners from around North America. As for the install, the V 2.0 is easier to install than the original V 1. The V 1.5 is the same when it comes to the install as the V 2.0. jwick likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 10-03-2014 at 05:48 PM.

10-03-2014, 06:11 PM	#248 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	^^^^ this That's why I posted my graph because it was the same tuner and same goals, safe power for stock block. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

10-09-2014, 10:49 AM	#250 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Any update from the powder coater? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

10-11-2014, 02:35 AM	#252 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Finally: Will be packing them up this weekend, so if you are looking to make the switch to the V 1.5, please let me know. As mentioned before, the upgrade will include the following items: New turbo to FMIC pipes New turbo compressor cover New air filter New thermostatic sandwich plate New OEM (Mobil) oil filter One new oil line One new 90 degree silicone coupler (others are re-used) One turbine inlet gasket (the turbo has to be removed for the switch) LMBmikeZ, jwick, GaleForce and 1 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

10-03-2014, 04:33 PM	#244 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Is there an installation pdf file available for this V 2.0 kit? I would like to read it a few times. Ok ok, I confess, I was only going to look at the pictures over and over again until the bottom corner wear out from excessive page flipping. Yes, such things are possible on pdf files if you do it enough times.

10-11-2014, 05:55 AM	#253 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	__________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 10:38 AM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 09:44 AM
Joepro's Boosted Performance build thread!	Joepro	Member's 370Z Gallery	82	04-16-2014 12:09 PM
For you guys that want to know what the Boosted Performance kit sounds like :)	Mitco39	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	04-10-2013 02:26 PM