Boosted Performance V 2.0

Boosted Performance

Well, as I have said earlier, there is a new version of the Boosted Performance twin scroll turbo kit....

Before I get to the details, I would like to thank this community for their support right from the beginning. It was great to see a positive response from car enthusiasts like myself when this kit was first introduced. As most of you know, my goal is to make the best turbo kit on the market, and have the best support possible behind it. I am not alone in this quest, as it is clear to that the guys at F.I have been doing the same thing, and also have a fantastic product available for you all. So it is great to see that I am not alone when it comes to putting a great product out to market.

I must also thank Mitco39, a local member who happened to be my second 370Z turbo customer. He was more than happy to bring his car over and leave it with me for three days. As a result I was able to achieve my goal in making the kit simpler to install.

There is a couple of reasons for this change. First is the install...and the feedback I received from current customers. A couple of you guys had a hard time with the installation of the 45* silicone coupler that goes directly on the turbo...and yes, it is a tight fit. This has now changed, and the new routing makes the install much easier.

The second reason (a result of the first) is the turbo options that will be available with the newly redesigned piping. With the new manifold the turbo sits at a slightly different location (very close to the previous). This allows me to use turbos that have the SP (S ported) compressor covers. These have a 4" inlet and a 2.5" outlet (vs 3.0" inlet and 2.0" outlet).

This opens up the doors for the new Precision GEN2 turbochargers like the all new 6266 rated at 800HP vs the old which was rated at 732HP:

http://www.precisionturbo.net/Street...6-CEA-reg-/567

As you can see this turbo is only available in the SP compressor cover configurations, so it was not compatible with the V1 of the turbo kit. There are a few more turbos that Precision is working on, but those won't be out till later this year. These will also be large turbos, and should only be considered for those who plan on building their engine.


Now to the recent changes.

If you recall, when I first had a donor car, I really wanted to route the IC piping on the driver side, but could not figure out a good way to do it. I then moved on, and figured out a way to push it though on the passengers side, and that works fine...nothing wrong with it, just a bit tight when installing.

It turns out, that if one moves the electrical connection on the starter by 180 degrees, enough room can be created to push a 2.5" intercooler pipe between it and the engine mount. This mod is very easy to do, loosen up an easy to get to 12mm bolt, spin the cable around 180 degrees, and you are done. Takes about a minute.

Here it is with the protective rubber boot, spun 180 degrees:




Because of this small modification the new plumbing looks like this:





Going in front of the OEM engine mount: (if you have an aftermarket engine mount, there will be room to spare since they are smaller diameter)



90 degree coupler looking from under the car, towards the steering knuckle:



T-bolt clamps are very easy to get to:






And over to the turbo:




On the floor it looks like so:




Now, since I had to make a new manifold to change the turbo location I went an extra step. The manifold is now build out of SCH 10 pipe. This pipe has a wall thickness of 3mm and the is essentially now "extreme". It weighs twice a much, but it is also twice as strong. There is nothing wrong with V1 of the manifold because proper welding techniques were implemented (back purging being the most important). The V1 of the manifold is just fine, and is track proven on the 350z platform.

Half done:



Here you can see the difference in wall thickness between the old V1 piping and the new V2, the new is almost twice the thickness. :



Finished product:



Mounted:



Clearance is still fantastic, and the lowest part of the turbo sits above the front sub-frame, and higher than the oil pan:



Port matched on the T4 flange:




All up:








Old compressor cover vs. new:






New turbo with larger air filter:




As a result of all this, the kit will now come with a oil thermostat, and two oil lines. One to the standard 30 row oil cooler and one from it back to the thermostatic plate:

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Boosted Performance

Now, going back to the V1 kit…

It is possible to use the new charge piping going from the turbo to the intercooler, with a new unmodified E compressor cover with the V1 manifold. The air filter would stay the same. You would need the three new pipes going from turbo to FMIC, and one 90* 2.5” silicone coupler. The turbo is clocked differently, but that is all. It is a simple changeover.

Here is a picture of the V1 kit with the new V2 charge piping:







All installed, using the V2 manifold, V2 down pipe, V1 recirc pipe, and V1 Y-pipe going to the F.I dual exhaust:



THE PRICE OF THE NEW V2 KIT DOES NOT CHANGE.

BONUS TO THE V2 KIT:

If you already have an oil cooler kit, you do not need to order one with the turbo kit. If this is the case, the price of the kit is $210 less. So, a complete twin scroll turnkey turbo kit without the oil cooler is $6,785 + shipping and PayPal.


So to sum it up, here is what is different:

*No need for oil filter relocation kit (so only 2 oil lines, to and from oil cooler)
*Retain OEM filter part number
*Oil thermostat will be included (Mocal)
*No need to fight with intercooler piping (routed on the driver side now)
*Kit will be compatible with all aftermarket oil cooler kits
*More turbo options, with SP compressor covers (4" inlet 2.5" outlet)
*No need to modify compressor cover (weld 90* elbow on outlet side)
*Larger air filter
*Much easier to install with new IC pipe routing
*Kit is compatible with all aftermarket oil cooler kits
*2012+ model years do not need to remove OEM oil cooler



At this time, I still don't think that the kit will work with the RHD cars, due to the steering knuckle being in the way of the larger air filter.

Now I just have to build a lot of these kits, since the demand has gone through the roof recently.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Cell

Wow it only gets better and better. Your V1 kit was awesome enough and now this...

BlkNismo

well somebody has been busy.

Job well done

TopgunZ

BP is good at opening up corrective actions. I can tell the CEO is an engineer...and a good salesman. I already want the latest model.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

YzGyz

I have to admit, this new version does not look as cool as the original. The old one looks really cool with all the bends and stuff. It does however look like it will function and install easier. Man I want this.

Alkatraz

Yay!!! Great to hear that this will fit a RHD with A/T!!! I'll take 5 kits!

Oh wait........sorry. I was dreaming again........carry on!

/troll


Nice work Sasha. Kit looks great!

mikey1600

awesome bit of gear! followed your first setup closely and even better now, great work. would go this in a heartbeat if it was available to me.

ZeN

Wow...now that you route it on the driver side it clears the passenger side alot, means RHD car have more clearance since the steering knuckle sits on the right side of the car. Still, my car is 7AT . I'll keep on dreaming

jwick

Awesome work Sasha. I highly recommend you putting this exact picture in the new manual. It would have been real helpful knowing the configuration of the IC piping instead of all the trial and error we went thru. I took one of the IC piping on the ground during my install and I was going to send it to you to request it being added. Now that you have changed the kit that is no longer necessary (unless you are continuing fabricaton of any existing kits, then just let me know and I'll email it over).

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Blaizon

Nice work! If I ever step into this platform, this would be the kit I'd go with bar none! It's great you are able to run the the PS covers now...I can't wait to see my friends car with this setup.

__________________
Single Turbo E92
07 Montego Blue 335i 6AT E90

wheee!

Awesome work Sasha!

__________________

elperuano

Will this new version fit the G37? I know the old version was confirmed to fit, I'm sure hoping it does!

Chuck33079

Oh, yeah, NOW you go and make that part easier to install two days after we installed the old kit.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

jwick

I can't see any changes that Sasha has made that would make it not fit a G37. You would have the same issues I had but nothing you can't work around

Sent from my SPH-L710 using Tapatalk

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build