Boosted Performance V 2.0

Boosted Performance · 04-15-2014, 02:05 PM

I will have to sit down and put together the price for the new pipe kit package. Will post it in the original post once I have it all figured out.

I also just ordered a bunch of the extruded elbows used to make these new manifolds.

elperuano · 04-15-2014, 02:29 PM

Sweeeeeet

Joepro · 04-15-2014, 03:32 PM

Hypothetically is I switched to the new turbo cover and piping would I require a re tune? Or will the s-cover not fit? I assume the s-cover will flow more air, would this screw up my tune? I am fine with my setup, but I like the idea of reducing the amount of oil lines just to simplify things.

jwick · 04-15-2014, 03:54 PM

If I go this way I am definitely retuning but it should just be a quick touch up and nothing like the initial turbo tune.

Joepro · 04-15-2014, 04:00 PM

I just did some light reading and most say the s-cover helps more in higher boost situations, which I do not consider 10 psi high boost. In my mind I would switch to new IC piping and to the thermostatic plate, eliminating filter relocation and 2 oil lines. If the piping length is about the same and stick with an e-cover I cant imagine a re-tune would be needed, this is the route I think I would go.

jwick · 04-15-2014, 04:05 PM

The only reasons I would consider it would be to run a bigger air filter and get down to only four oil lines (I currently have 6 oil lines instead of 5 like the standard kit because of the GReddy thermostat).

My tuner is like 10 miles from my house and a quick retune would probably only cost me an hr of dyno time. When it's that little I'm more than willing to get it retuned.

Joepro · 04-15-2014, 04:10 PM

Im think the way Sasha worded things the s cover will not fit with the turbo location with the v1 manifold, at that point I think it will get too expensive to justify, I think I would stick with the e-cover and the new piping.

jwick · 04-15-2014, 04:13 PM

Quote:

Originally Posted by Joepro

Im think the way Sasha worded things the s cover will not fit with the turbo location with the v1 manifold, at that point I think it will get too expensive to justify, I think I would stick with the e-cover and the new piping.

Now that I reread that I agree. It still might be worth it for the oil lines depending on the cost he comes back with but not for 10-15k miles when its time for a filter change

Sent from my SPH-L710 using Tapatalk

Mitco39 · 04-15-2014, 05:08 PM

Quote:

Originally Posted by Joepro

Im think the way Sasha worded things the s cover will not fit with the turbo location with the v1 manifold, at that point I think it will get too expensive to justify, I think I would stick with the e-cover and the new piping.

Thats correct. I am running what you could call the V1.5 kit right now. And right out of the gate I am building 0.5PSI more boost with no changes to my boost controller. So the kit is able to push that air more effectively than it has done in the past.

jwick · 04-15-2014, 05:12 PM

Quote:

Originally Posted by Mitco39

Thats correct. I am running what you could call the V1.5 kit right now. And right out of the gate I am building 0.5PSI more boost with no changes to my boost controller. So the kit is able to push that air more effectively than it has done in the past.

Are you still running the original PT6266 or was the new turbo housing part of the V1.5?

jlo370z · 04-15-2014, 04:14 PM

Very nice! great work as always

who is next???

zguynate · 04-15-2014, 04:55 PM

It amazes me that the best turbo kit for the 370 (IMO of course) can get better. Props to Sasha!

Mitco39 · 04-15-2014, 05:15 PM

You need a whole new turbo manifold to be able to fit the new turbo housing. I am running the original turbo, its just clocked different and the elbow that was welded to the outlet of it is now removed.

jwick · 04-15-2014, 05:17 PM

Cool. Just wasn't sure if Sasha sent you home with a new manifold or not for your efforts. Nice to have real results that the changes do indeed increase efficiency.

09nismo498 · 04-15-2014, 07:55 PM

Nice work sasha! I think I will be upgrading my v1 kit to v2 as well once available. Still not happy with the fitment of the 45 elbow on the passenger side, and this would completely eliminate my worries about it

04-15-2014, 02:05 PM	#1 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	I will have to sit down and put together the price for the new pipe kit package. Will post it in the original post once I have it all figured out. I also just ordered a bunch of the extruded elbows used to make these new manifolds. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

04-15-2014, 03:32 PM	#3 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Hypothetically is I switched to the new turbo cover and piping would I require a re tune? Or will the s-cover not fit? I assume the s-cover will flow more air, would this screw up my tune? I am fine with my setup, but I like the idea of reducing the amount of oil lines just to simplify things. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-15-2014 at 03:40 PM.

04-15-2014, 03:54 PM	#4 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	If I go this way I am definitely retuning but it should just be a quick touch up and nothing like the initial turbo tune. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-15-2014, 04:00 PM	#5 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	I just did some light reading and most say the s-cover helps more in higher boost situations, which I do not consider 10 psi high boost. In my mind I would switch to new IC piping and to the thermostatic plate, eliminating filter relocation and 2 oil lines. If the piping length is about the same and stick with an e-cover I cant imagine a re-tune would be needed, this is the route I think I would go. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-15-2014, 04:05 PM	#6 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	The only reasons I would consider it would be to run a bigger air filter and get down to only four oil lines (I currently have 6 oil lines instead of 5 like the standard kit because of the GReddy thermostat). My tuner is like 10 miles from my house and a quick retune would probably only cost me an hr of dyno time. When it's that little I'm more than willing to get it retuned. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-15-2014, 02:29 PM	#2 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Sweeeeeet

04-15-2014, 04:10 PM	#7 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Im think the way Sasha worded things the s cover will not fit with the turbo location with the v1 manifold, at that point I think it will get too expensive to justify, I think I would stick with the e-cover and the new piping. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-15-2014, 04:14 PM	#11 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43427	Very nice! great work as always who is next??? __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

04-15-2014, 04:55 PM	#12 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 74	It amazes me that the best turbo kit for the 370 (IMO of course) can get better. Props to Sasha! __________________ 2009 370z touring w/sports package

04-15-2014, 05:15 PM	#13 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	You need a whole new turbo manifold to be able to fit the new turbo housing. I am running the original turbo, its just clocked different and the elbow that was welded to the outlet of it is now removed. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-15-2014, 05:17 PM	#14 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Cool. Just wasn't sure if Sasha sent you home with a new manifold or not for your efforts. Nice to have real results that the changes do indeed increase efficiency. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-15-2014, 07:55 PM	#15 (permalink)
09nismo498 Base Member Join Date: Sep 2010 Location: Chicago burbs Posts: 207 Drives: 14 GTR Rep Power: 16	Nice work sasha! I think I will be upgrading my v1 kit to v2 as well once available. Still not happy with the fitment of the 45 elbow on the passenger side, and this would completely eliminate my worries about it zguynate and Joepro like this. __________________ 2013 370z Nismo Turbo 2017 Lexus IS200T F Sport (DD)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance turbo kit self install (review)	Cell	Forced Induction	87	10-24-2017 09:38 AM
Boosted Performance round 2 list	Boosted Performance	Forced Induction	1480	06-03-2014 08:44 AM
Joepro's Boosted Performance build thread!	Joepro	Member's 370Z Gallery	82	04-16-2014 11:09 AM
For you guys that want to know what the Boosted Performance kit sounds like :)	Mitco39	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	04-10-2013 01:26 PM