Croydon Racing Developments Stillen Custom Tune

vlad370z · 03-28-2014, 09:18 AM

Croydon Racing Developments in Sydney Australia custom uprev tune - dyno dynamics.
I am happy with the numbers, my tuner could of achieved slightly better results however I wanted to be on the conservative side.

Stillen SC - 9lb pulley, 850 injector and 340l fuel pumps

theDreamer · 03-28-2014, 09:23 AM

Nice numbers, will add you to the finished builds threads for boost!
Any fitment issues with the stillen sc kit and RHD?

vlad370z · 03-28-2014, 10:01 AM

Nothing major just the location of Intercooler water pump and a few minor adjustments. The guys at Croydon Racing Developments said it was an easy install.
Next week installing a frozen boost heat exchanger with braided hoses , I'll post the new dyno sheet, hopefully it will lower the inlet air temps a bit.

ANMVQ · 03-28-2014, 10:52 AM

HMM sounds like I started something with being the one who dumped the Stillen heat exchanger and went with the Frozen Boost one

.. BTW because I have no clue what are those translated to WHP? Thank you sir

IVO is over near you guys isn't he?

JWillis72 · 03-28-2014, 12:19 PM

Quote:

Originally Posted by vlad370z

hopefully it will lower the inlet air temps a bit.

Have you considered meth/water injection? We installed a Aquamist system on my Stillen supercharger and the AITs are now only 14 degrees warmer than the air temp under full boost and after 10 dyno pulls.

1slow370 · 03-28-2014, 12:21 PM

403hp

Realale · 03-28-2014, 12:44 PM

Quote:

Originally Posted by 1slow370

403hp

Hmm 403hp with a 9lb pulley

ANMVQ · 03-28-2014, 01:11 PM

Quote:

Originally Posted by Realale

Hmm 403hp with a 9lb pulley

Exactly what I was thinking, low anyone. I know I know their all different but if in fact its 403 its low. I would have thought 430's

Chuck33079 · 03-28-2014, 01:26 PM

Quote:

Originally Posted by ANMVQ

IVO is over near you guys isn't he?

OP is in Australia. Ivo is in Switzerland, right?

Don't Dyno Dynamics tend to read low?

ANMVQ · 03-28-2014, 01:49 PM

Quote:

Originally Posted by Chuck33079

OP is in Australia. Ivo is in Switzerland, right?

Don't Dyno Dynamics tend to read low?

Yea what's wrong with me today

They do but the one I was on was with my impeller I made 457 and before that I used two mustang and dyno dynamics one my stock pulley 8 PSI and made 412? 7SPD and AWD , I probably made more but the car an the dyno where fighting, That's why my lines where all squiggly :/

Chuck33079 · 03-28-2014, 01:51 PM

What kind of gas do they get down under?

1slow370 · 03-28-2014, 02:27 PM

Quote:

Originally Posted by Chuck33079

What kind of gas do they get down under?

Roo milk

Chuck33079 · 03-28-2014, 02:30 PM

Quote:

Originally Posted by 1slow370

Roo milk

Is that RON?

Infidel · 03-28-2014, 03:38 PM

Isn't it summer down there...could be hot as hell.

G37sHKS · 03-28-2014, 04:02 PM

His 400 HP might be your 500 so don't compare his dyno to yours..

03-28-2014, 09:23 AM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Nice numbers, will add you to the finished builds threads for boost! Any fitment issues with the stillen sc kit and RHD? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

03-28-2014, 10:01 AM	#3 (permalink)
vlad370z Base Member Join Date: Oct 2013 Location: Sydney Australia Posts: 52 Drives: 2010 Nissan 370Z Rep Power: 12	Nothing major just the location of Intercooler water pump and a few minor adjustments. The guys at Croydon Racing Developments said it was an easy install. Next week installing a frozen boost heat exchanger with braided hoses , I'll post the new dyno sheet, hopefully it will lower the inlet air temps a bit. __________________ 370z Stillen SC 9lb pulley Uprev Tune Z1 Oil Cooler Hi Tech CB JBT BBK JBT Rotors White Line Sway Bars Swift Springs

03-28-2014, 10:52 AM	#4 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	HMM sounds like I started something with being the one who dumped the Stillen heat exchanger and went with the Frozen Boost one .. BTW because I have no clue what are those translated to WHP? Thank you sir IVO is over near you guys isn't he? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

03-28-2014, 12:21 PM	#6 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	403hp ANMVQ likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

03-28-2014, 01:51 PM	#11 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	What kind of gas do they get down under? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-28-2014, 03:38 PM	#14 (permalink)
Infidel Enthusiast Member Join Date: Mar 2013 Location: Central Florida Posts: 457 Drives: 2013 GM 6MT Rep Power: 14	Isn't it summer down there...could be hot as hell.

03-28-2014, 04:02 PM	#15 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	His 400 HP might be your 500 so don't compare his dyno to yours.. ndh795 likes this. __________________ G37 BUILD UNDER CONSTRUCTION

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
stillen supercharger custom tune	hyunsoo1803	Forced Induction	23	08-21-2013 12:04 PM
UpRev Dyno Jet Tune - Stillen G3 Intake, Stillen CBE, M370, F.I. TP Shortie	scruffydog	Tuning	5	06-26-2013 03:25 AM
Forged Performance: Stillen SC Custom Tune and Review	Sharif@Forged	Forced Induction	26	09-20-2011 10:46 AM