Vq35hr 20psi stillen blower

jwick · 03-29-2014, 01:26 AM

Quote:

Originally Posted by O&G

^ exactly but someone has 2 hate or its no fun!

sent from my Samsung Galaxy Note

Considering that a lot of us have ponied up serious money to push the limits of the VQ platform. You would think that more people would be excited, over skeptical, with pushing major power. I personally would like to know exactly what this platform is able to handle. But I guess Haters will hate.

I personally can't wait to see what Johnny and Ron do with this monster. In fact can't wait until tomorrow when I get to check it out.

1slow370 · 03-29-2014, 01:41 AM

being a de is going to push the presure up a lot, they don't flow all that great, the hr stock cams and timing will run a few pounds less on the same blower, and the vhr with it's tremendous overlap will run even lower, horsepower doesn't follow this as well an hr 18psi can easily make more power than a de at 21. a vhr at 12 makes more power than a de at 18. That is all uncammed of course.

Oh it's great and all but I really want someone to try and fit the v7 (apparently they will put the v4 housing on the v2 case now) with it's bigger 60k+ rpm limit and 2"larger impeller. <- if that fits it will be cool. the V7 should bolt to the v3 bracket the volute is just a little bigger or if they somehow fit a T-trim impeller on the v3

jwick · 03-29-2014, 01:53 AM

Quote:

Originally Posted by 1slow370

being a de is going to push the presure up a lot, they don't flow all that great, the hr stock cams and timing will run a few pounds less on the same blower, and the vhr with it's tremendous overlap will run even lower, horsepower doesn't follow this as well an hr 18psi can easily make more power than a de at 21. a vhr at 12 makes more power than a de at 18. That is all uncammed of course.

Oh it's great and all but I really want someone to try and fit the v7 (apparently they will put the v4 housing on the v2 case now) with it's bigger 60k+ rpm limit and 2"larger impeller. <- if that fits it will be cool. the V7 should bolt to the v3 bracket the volute is just a little bigger or if they somehow fit a T-trim impeller on the v3

I love your profile pic but I prefer no carpet on the beaver

1slow370 · 03-29-2014, 01:57 AM

Haha yeah but its funny

Sent from my HTCONE using Tapatalk

CSF Inc. · 03-29-2014, 02:21 AM

Quote:

Originally Posted by O&G

Ron Bergenholtz doesn't guess, he is building the entire setup. It will be running on E85 and has some custom pulley and charger mods as well. Like them on FB and stay tuned!

Ron was the 1st person in motorsports to give me a chance with cooling his drift cars.. The man is a genius with engines.. He has taught me so much, and is one person that gets my deepest discount on product no matter what..

He is the man, and I'm looking forward to hearing more about this build.

gabe3d · 03-29-2014, 05:34 AM

Quote:

Originally Posted by 1slow370

being a de is going to push the presure up a lot, they don't flow all that great, the hr stock cams and timing will run a few pounds less on the same blower, and the vhr with it's tremendous overlap will run even lower, horsepower doesn't follow this as well an hr 18psi can easily make more power than a de at 21. a vhr at 12 makes more power than a de at 18. That is all uncammed of course.

Oh it's great and all but I really want someone to try and fit the v7 (apparently they will put the v4 housing on the v2 case now) with it's bigger 60k+ rpm limit and 2"larger impeller. <- if that fits it will be cool. the V7 should bolt to the v3 bracket the volute is just a little bigger or if they somehow fit a T-trim impeller on the v3

Agree with you to some extent. The vhr is a superior engine, has higher CR, bigger displacement and better VE therefore it's natural for the same compressor to create less boost in the manifold, but the net result shouldn't be dramatically different if they have a similar kit and reasonable tune. When you cram air into the engine a lot of variables in a NA engine that were important becomes less important.

Best comparison i can give you is the comparison of the GTM VQ42VHR vs my VQ41DE. Similar displacement, same CR and practically identical FI setup, however i opted for HFC and smaller exhaust for noise. The DE made 512/395@9.4psi while the VHR made 546/411@11psi. Without the HFC and smaller exhaust i made 20/10 more. As you can see practically no difference and my cams have an extreme amount of overlap. Cam phasing/timing is moot since both setup have their advantage and disadvantage. You can also lookup the vortech kit on the DE vs skillen kit on the VHR (both stock), not a dramatic amount of difference in the net result either.

As for this build, granted that they don't run into any slippage problem then i don't see why they won't be able to hit 20psi. The stillen setup as far as minimizing pressure drop is very efficient. But like someone else mentioned, the air to water might be the limiting factor for maximizing power. E85 should help though, so lets see how it goes. I would also love to see the V7 dropped in. The 370z has more room so it might be possible with not a lot of work.

1slow370 · 03-29-2014, 06:55 AM

thats what i mean its before cams. The vvel's "profile" is already at what hr and de race cams are at, the hr is somewhere in between the two so if the supercharger made 21psi on de stock cams, putting it on an hr means more overlap and less boost do to a bit more wasting, and a better breathing engine. You can cam any of the motors to do the same thing as a vhr, but that isn't the way they come. to really make use of a built engine the guy is going to need a T trim or v7/v4 whichever fits easier. If they get 600hp out of the modified v3 they could get 700 or 800 out of a v7

Oh and a turbo reference doesn't translate over to superchargers all that well. A turbo is much more tolerant of excessive overlap than a supercharger is.

gabe3d · 03-29-2014, 10:42 AM

Quote:

Originally Posted by 1slow370

thats what i mean its before cams. The vvel's "profile" is already at what hr and de race cams are at, the hr is somewhere in between the two so if the supercharger made 21psi on de stock cams, putting it on an hr means more overlap and less boost do to a bit more wasting, and a better breathing engine. You can cam any of the motors to do the same thing as a vhr, but that isn't the way they come. to really make use of a built engine the guy is going to need a T trim or v7/v4 whichever fits easier. If they get 600hp out of the modified v3 they could get 700 or 800 out of a v7

Oh and a turbo reference doesn't translate over to superchargers all that well. A turbo is much more tolerant of excessive overlap than a supercharger is.

Not sure exactly how much overlap the VHR has since i have never seen the cam spec card nor do I claim know exactly how the VVEL black magic affects the cam for that matter i'm not even sure if anyone knows for sure.

I didn't make any reference to turbos. A SC is more like an NA compared to Turbo and NA, when talking about cam profiling. The first you worry about blow thru where as the latter you worry about exhaust gas making its way back into the engine.

Sorry for the off topic conversation.

jwick · 03-29-2014, 10:49 PM

Quote:

Originally Posted by 1slow370

being a de is going to push the presure up a lot, they don't flow all that great, the hr stock cams and timing will run a few pounds less on the same blower, and the vhr with it's tremendous overlap will run even lower, horsepower doesn't follow this as well an hr 18psi can easily make more power than a de at 21. a vhr at 12 makes more power than a de at 18. That is all uncammed of course.

Oh it's great and all but I really want someone to try and fit the v7 (apparently they will put the v4 housing on the v2 case now) with it's bigger 60k+ rpm limit and 2"larger impeller. <- if that fits it will be cool. the V7 should bolt to the v3 bracket the volute is just a little bigger or if they somehow fit a T-trim impeller on the v3

You seem to know a lot about blowers but this is a HR not a DE. Why don't we just all wait and see what magic the mad scientist and Jtran come up with

O&G · 03-29-2014, 10:59 PM

I thought we covered this was a HR build days ago...

sent from my Samsung Galaxy Note

1slow370 · 03-29-2014, 11:03 PM

Im just trying to have a discusion to see what they did to improve it, a little background on the platform and possible future improvements. You know put some usefull stuff in here. And exactly my point its an hr not a de so it will run less pressure than the 21psi of the de with the same mods. Hp could be more than the de but same blower spun same speed will make less boost on an hr. If they are spinning it faster, the question of the pulley size, and how much overspeed it is, as well as how long the blower will last at that speed is raised. If its 15k over speed, depending on how much redline it sees it may make great numbers, but it could also blow the charger much sooner. The discusion right now is what the shops thoughts on that are or if it isnt a concern to the customer, maybe its a case of if it blows well just change it out. If that level of speed is safe then that would be usefull info. No one on here likes to have technical discussions aparently, its like everyone is just waiting to hear what some shop does next instead of asking questions posting info and trying to learn something.

Sent from my HTCONE using Tapatalk

O&G · 03-29-2014, 11:14 PM

Man....just close the thread already....fuk informing the community on credited shops and professional racers trying to expand the vq platform! Internet penis is getting 2 large for this tiny thread! Google it later because that's what makes everyone knowledgeable now a days anyways.

sent from my Samsung Galaxy Note

Chuck33079 · 03-30-2014, 12:15 AM

Quote:

Originally Posted by O&G

Man....just close the thread already....fuk informing the community on credited shops and professional racers trying to expand the vq platform! Internet penis is getting 2 large for this tiny thread! Google it later because that's what makes everyone knowledgeable now a days anyways.

sent from my Samsung Galaxy Note

Don't do that. Some of us just want to see cool builds. This is a cool build. We can all say whatever, but at the end of the day that car is going to be a ******* animal. A lot of power and the response of a sc has got to be a whole lot of fun.

jwick · 03-30-2014, 12:29 AM

O&G guess we ain't smart enough down here in Texas for these here builds....

However I vote with Chuck, so in for the final results!

G37Sam · 03-30-2014, 02:49 AM

Quote:

Originally Posted by O&G

Man....just close the thread already....fuk informing the community on credited shops and professional racers trying to expand the vq platform! Internet penis is getting 2 large for this tiny thread! Google it later because that's what makes everyone knowledgeable now a days anyways.

sent from my Samsung Galaxy Note

Come on man.. Just add them to your ignore list. Please don't let a troll cost the entire community, we are not responsible for their actions lol

03-29-2014, 01:41 AM	#32 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	being a de is going to push the presure up a lot, they don't flow all that great, the hr stock cams and timing will run a few pounds less on the same blower, and the vhr with it's tremendous overlap will run even lower, horsepower doesn't follow this as well an hr 18psi can easily make more power than a de at 21. a vhr at 12 makes more power than a de at 18. That is all uncammed of course. Oh it's great and all but I really want someone to try and fit the v7 (apparently they will put the v4 housing on the v2 case now) with it's bigger 60k+ rpm limit and 2"larger impeller. <- if that fits it will be cool. the V7 should bolt to the v3 bracket the volute is just a little bigger or if they somehow fit a T-trim impeller on the v3 __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 03-29-2014 at 01:48 AM.

03-29-2014, 01:57 AM	#34 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Haha yeah but its funny Sent from my HTCONE using Tapatalk O&G likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

03-29-2014, 06:55 AM	#37 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	thats what i mean its before cams. The vvel's "profile" is already at what hr and de race cams are at, the hr is somewhere in between the two so if the supercharger made 21psi on de stock cams, putting it on an hr means more overlap and less boost do to a bit more wasting, and a better breathing engine. You can cam any of the motors to do the same thing as a vhr, but that isn't the way they come. to really make use of a built engine the guy is going to need a T trim or v7/v4 whichever fits easier. If they get 600hp out of the modified v3 they could get 700 or 800 out of a v7 Oh and a turbo reference doesn't translate over to superchargers all that well. A turbo is much more tolerant of excessive overlap than a supercharger is. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 03-29-2014 at 07:02 AM.

03-29-2014, 10:59 PM	#40 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	I thought we covered this was a HR build days ago... sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-29-2014, 11:03 PM	#41 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Im just trying to have a discusion to see what they did to improve it, a little background on the platform and possible future improvements. You know put some usefull stuff in here. And exactly my point its an hr not a de so it will run less pressure than the 21psi of the de with the same mods. Hp could be more than the de but same blower spun same speed will make less boost on an hr. If they are spinning it faster, the question of the pulley size, and how much overspeed it is, as well as how long the blower will last at that speed is raised. If its 15k over speed, depending on how much redline it sees it may make great numbers, but it could also blow the charger much sooner. The discusion right now is what the shops thoughts on that are or if it isnt a concern to the customer, maybe its a case of if it blows well just change it out. If that level of speed is safe then that would be usefull info. No one on here likes to have technical discussions aparently, its like everyone is just waiting to hear what some shop does next instead of asking questions posting info and trying to learn something. Sent from my HTCONE using Tapatalk __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

03-29-2014, 11:14 PM	#42 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Man....just close the thread already....fuk informing the community on credited shops and professional racers trying to expand the vq platform! Internet penis is getting 2 large for this tiny thread! Google it later because that's what makes everyone knowledgeable now a days anyways. sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-30-2014, 12:29 AM	#44 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	O&G guess we ain't smart enough down here in Texas for these here builds.... However I vote with Chuck, so in for the final results! O&G and DEpointfive0 like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Stillen blower blew up :(	FireDan50	Forced Induction	20	08-22-2013 07:05 AM
GReddy High Capacity Aluminum Oil Pan VQ35HR VQ37HR USED $269 w/ FREE SHIPPING*	Sales@AAMComp	Drivetrain/Engine	12	10-30-2012 01:53 PM
WTB: ATI Blower Fan	DIGItonium	Misc Items for sale (No Z stuff)	6	12-29-2010 02:38 PM
Any 370s running higher than 20psi?	GoDZiLLa_845	Forced Induction	68	04-17-2010 12:31 AM
NEW Exedy Stage 2 Cerametalic Clutch Kit w/Chromaly Flywheel VQ35HR/VQ37	NIZMOZ	Parts for sale (Private Classifieds)	8	10-25-2009 09:49 AM