GT Motorsports: 370Z Supercharger system development

G37Sam

I like the Stealth look of GTMs kit tbh, would pass registration with no problems here

I'm not sure even my dealership would notice

__________________

theDreamer

Sir, what is this belt noise I am hearing, not sure that is stock.

Oh it is, special edition for my year.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

stormcrow

The cover won't hide that god-awful coolant resevoir for the pre-cooler. This is one of the big eye-sores that never goes away for Stillen. It even made my 2006 Pathfinder engine bay look like garbage.

In truth, there is no comparison between the two kits as far as aesthetics go. Absolutely no way that a cover could make the coolant resevoir or gawdy intake piping with bracket remotely appealing. Nothing will change about how the coolant hoses from a poorly designed intercooler/pre-cooler are draped across the valve covers and how the main wiring harness is relocated. This, again, is typical of these kits. My Pathfinder kit was obtrusive and developed poorly. Just from the few pictures shown in the Stillen thread, I can tell the same mistakes have been repeated. The level of Research and Development between the two kits is painfully obvious.

RCZ

Thats about as much as you got right. If you only knew....

Your comments fit right in with this thread though so I'm not surprised. Did Sam put you up to this??

I'm entertained by the irony.

stormcrow

If I only knew what?

My thoughts, opinions, facts stem from actually having purchased, installed and utilized a Stillen kit. If you prefer them, so be it. If you want to be educated, read the root thread of the links I am about to post as the links are solely my responses. A LOT more great information in that thread.

MY350Z.COM Forums - View Single Post - Stillen Super Charger for the HR? - Post 184

MY350Z.COM Forums - View Single Post - Stillen Super Charger for the HR? - Post 187

As you can see, I have a lot of experience with F/I cars. And I just traded my 09 GT-R in for the 2010 370Z Nismo so that I could have yet another project car.

As far as Sam putting me up to this, well, since I am east coast and 30 miles from Forged Performance, you do the math. Though, maybe I should ask Sam to put me on the payroll.

EDIT - links are leading to same post even though they are different URLs. For those interested, check post 184 and 187 of the above posted thread.

RCZ

You might as well..

Its ok, I dont want to start a discussion on GTM's thread. Frankly, I don't feel like I have to..

Buddy Revell

Although I do prefer the more subtle engine bay of the GTM kit, aesthetics aren't really a priority for me when judging between the two kits.

stormcrow

Feel free to PM me with any information you find pertinent to your side of the debate. It doesn't have to be here or in any other thread. But, there is no refuting actual experience...the experience that I have had with a Stillen designed supercharger kit.

RCZ

Sorry man, no can do. Also, this isn't your pathfinder so you have about as much experience with the stillen 370z sc kit as the rest of the folks here.

stormcrow

No can do? This tells me you are wasting bandwidth. I see from your sig that you are a Stillen fanboi. No worries.

For the record, whether or not the kit is for the 370, 350, Tundra or Pathfinder, they are all the same basic components with the same basic R&D. And as stated above, I can visually see, from the pictures posted by Kyle in the Stillen thread, the same poor product design in the 370Z kit as was in my Pathfinder kit.


EDIT - Apologies, Sam, for taking your thread so far off-topic. I am truly sorry. Ending such now.

budakai

Why the hell would you sell your GTR for a 370z...The 370z is small as ****...that's why I didn't get one...I got the g37 because I couldn't afford a gtr...Why would you downgrade all the way down to a nissan z....just curious...

theDreamer

He said project car, the Z parts are cheaper than a GT-R so for a project car it is better.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

B1nks

I really wanna check those links out but I've been banned from my350.com for "harassment" to a mod by telling him "my bad, don't hurt me with your e-jiu jitsu". What a bunch of ******* tards. Keep this debate up though ! I know who I like better and it isn't Stillen not based off of personal experience but off of other peoples in the past. I do like their g3 intakes though.

Z eliminator

So how many of you guys are actually going to buy the GTM kit?
Yes i had a stillen on my 350, You would not believe what broke on it.
Yes i hurt my motor with it. In defence of stillen they did send me all the parts to fix it and yes they paid me for the labour that the dealer charged me to fix it.. I think thats its a great daily driver SC at 10 lbs boost on my ported M-62 blower, What broke on it . intercooler cooling pump, the pulley assembly drive shaft between the blower and the crank pulley. It only made 303 rwhp.
I have bought tons of parts from Sam at GTM ( 4.2 stroker) and when we spoke about the SC , i decided to by it because it looked like a 400 hp kit and thats all i need. 417 rwhp or more is a lot of power in a 370. Now add 2 more lbs of boost and you may get 446,
Do you guys know how much rwhp a stock GTR has. ( 417 rwhp).
Now we have car which is aprox 700 lbs lighter with the same rwhp, It will be handful to drive,
I call my GTM SC a poor mans GTR,
Its going to be a great drag race in the 1/4 mile.

__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

stormcrow

As theDreamer mentioned, the trade down was due to the desire to build a car as a project. But, as far as expense goes, building/modifying the GT-R wasn't really an issue...the issue lay in the fact that most vendors were charging astronomical amounts for aftermarket parts that were either slightly superior to OEM or, even at times, inferior. GT-R owners term it the "GT-R tax." Couple that with the fact that the GT-R is extremely bleeding edge as far as technology goes and typical power adders do not work, it will be a while before tuners and developers can catch up and provide a solid foundation on which to build the platform. I didn't feel like being a pioneer or guinea pig.


How dare you harass the superior my350z.com mods?! Some of those boys are rather touchy. You should be able to read the links without having a membership or the ability to log in, though.