"The GTM Supercharger Will Have three different stages to offer

Stage one will come with C38-61 Trim up to 550 HP
Stage two will come with C38-71 trim up to 590 HP
Stage three will come with C38-81 trim up to 630 HP"




550 bhp: crossing fingers!!!!!!

I do not think on stock exhaust/cats/etc. this will break into the 400, but with simple bolt on upgrades this will be 430-450 without much change in the SC setup.

I say under 431 or over 433.

For the CARB-legal version, I predict about 390 to the wheels on stock exhaust, 415 with a catback.

Right around 400 sounds pretty reasonable for carb kit with stock components.

I say whoever guesses the closest gets a 25% discount on the SC. That wouldn't be too crazy right, LOL!

whats the BSFC rating with this engine under FI? Has GTM said what the dyno numbers revealed?

Edit:
nm, doesn't really matter, I was just curious...

600 runnin on Unicorn

Wrong kit, AAM runs on unicorn not GTM. So funny that you think GTM runs on unicorn, lame...

guess I'll revise my 425whp stock exhaust estimate. Looking around I see our 3.7L has shown to consistantly put down ~425whp @6psi on TT builds (turbo-back exhaust) so I assume 390-400whp would be a safe bet for stock exhaust @6psi on a S/C and MAYBE 425whp with HFCs and 2.5" catback...if infact 6psi is the target boost

In for the updates.

390-415

~420 (+/- 10) w/stock components

LOL................

i guess we are all on the same boat...........

we might have a MI or clinical depression, if the dyno result is not posted by today..... *^^*

439whp @ 8psi.