VSR Engine Build

ZKraken22 · 03-05-2014, 04:43 PM

Quote:

Originally Posted by SRperformance

For those who are looking for a NEW Short block.

You get!
New Block
New Crank
OEM Bearings
CP 10:1
K1 Rods
Engine Balance
Cryogenics
Blue Printed
all for the low price of 5699.00

See this is what i like to see. I'm on the GT-R forum alot and everything is out in the open. becaise i might not wanna new block now but it would be nice if 6 months from now i can just refer back to this thread for a Quote, alot less leg work.

SRperformance · 03-05-2014, 07:04 PM

Quote:

Originally Posted by G37sHKS

Why is that?

Cryogenics

SRperformance · 03-05-2014, 07:15 PM

Quote:

Originally Posted by Chuck33079

Nobody makes coated OEM bearings?
So we'd only need to send you a flywheel if we were planning on using an aftermarket one and we wanted everything balanced together?

There is a company here in Tampa that coats them. now for the draw back...You have to take in count the thickness of the coating. Nissan makes a dozen types of engine bearings. We have to order one of every size and test fit them in our blocks. Long process!!

Quote:

Originally Posted by G37sHKS

Why is that?

Cryogenics

Quote:

Originally Posted by Ron

I got an email from ACL saying that they have main bearings and thrust washer for the Z and GTR. No conrod bearings though.

Not a big FAN of ACL, considering they went out of business couple years back.

Quote:

Originally Posted by Boss_302

Suggestions regarding the oil pump. That seems to be a weak issue with this engine.
Other than the NISMO race pump for $$$$, Any ideas on blue printing or upgrading internal rotor

That's a lot of money in RND and pray to god we get it right!

Quote:

Originally Posted by Infidel

I had a couple of my rifles "cryo'd" a few years back, makes the metal stronger and more heat resistant.

Yes, it does

Quote:

Originally Posted by DIGItonium

I can think of a couple choices for our OEM crank bearings: coatings and shot peening. I might consider shot peening various engine parts. If possible, perhaps coat it as well.

We put the engine, Crank , bearings , rods and hardware into the cryo machine.

Ron · 03-05-2014, 07:49 PM

That's exactly what I heard about ACL.

MyKindaGuise · 03-05-2014, 08:35 PM

What a fantastic price. This looks really nice.

COSMO · 03-05-2014, 08:54 PM

Now that is customer service guys..

Bobby I will have those exhaust manifolds off this week and shipped down to you..

COSMO · 03-05-2014, 09:06 PM

Wow that is a Great price!!! I'm sure most are wondering why my cost was a lot more but it was due to going with a long block instead of a short block. To anyone interested I will be selling the heads, crank, timing cover/chain etc from my old motor.

09nismo498 · 03-05-2014, 11:08 PM

Awesome price. I want.

TerribleONE · 03-05-2014, 11:30 PM

Killer price. I was thinking more in the 8k range. Subd

Mr.Squeeze · 03-06-2014, 01:58 AM

Quote:

Originally Posted by Chuck33079

And can we just send a set of OEM bearings to Calico and get them coated?

Yes you can I did this on my built engine it doesn't cost much at all.

RyanWest · 03-06-2014, 02:47 AM

Quote:

Originally Posted by 1slow370

Are you asking about the 10:1 pistons? It increases the the low boost performance by raising pressures to spool the turbos faster and provide more torque, of course anyone going over 15psi would be better off with the current 9:1 offerings as eventually with more boost the higher ratio is going to raise pressures too high. but for the guys in the 550-700 range it will be a more efficient built motor.

At high power levels the 9:1 motor will see less stress than the 10:1 motor, but the 10:1 more will make more power for the amount of charge it gets.

Doesnt make much sense to me to run higher compression! I guess the next question here is what turbos are going to run on this build??

blackonorange · 03-06-2014, 03:01 AM

That's a disgusting price

Mr&Mrs · 03-06-2014, 07:49 AM

At this price I may say F the C7 for a couple more years now I'm doing a 180 again. Not to mention being local. Sigh decisions!

AdobePhil · 03-06-2014, 08:29 AM

Son of a bitch. I wish I knew about this before I paid Nissan 11 grand for an entirely new stock motor. Oh well. I'm sure I'll be happy with the turbo when I stop by later today and see her on the Dyno.

Sent from my SCH-I545 using Tapatalk

Mr&Mrs · 03-06-2014, 08:40 AM

Wow I would never put a stock block back in a car. You can almost always go built for the same price or less.

03-05-2014, 07:49 PM	#64 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	That's exactly what I heard about ACL. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

03-05-2014, 08:35 PM	#65 (permalink)
MyKindaGuise A True Z Fanatic Join Date: Feb 2012 Location: Pennsylvania Posts: 2,029 Drives: 11' 370z Sprt M6 Rep Power: 19	What a fantastic price. This looks really nice. __________________ \|445whp398tq\| \|BW S259 Turbo\|3" Downpipe\Exhaust\|ID1000\|AeroMotive\|Tial\|EcuTek\|BC BR\|S0-4\|MaffFab\| MKGs-Single-Turbo

03-05-2014, 08:54 PM	#66 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Now that is customer service guys.. Bobby I will have those exhaust manifolds off this week and shipped down to you.. Ron likes this.

03-05-2014, 09:06 PM	#67 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Wow that is a Great price!!! I'm sure most are wondering why my cost was a lot more but it was due to going with a long block instead of a short block. To anyone interested I will be selling the heads, crank, timing cover/chain etc from my old motor. GaleForce likes this. Last edited by COSMO; 03-05-2014 at 11:05 PM.

03-05-2014, 11:08 PM	#68 (permalink)
09nismo498 Base Member Join Date: Sep 2010 Location: Chicago burbs Posts: 207 Drives: 14 GTR Rep Power: 16	Awesome price. I want. elperuano likes this. __________________ 2013 370z Nismo Turbo 2017 Lexus IS200T F Sport (DD)

03-05-2014, 11:30 PM	#69 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Killer price. I was thinking more in the 8k range. Subd __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-06-2014, 03:01 AM	#72 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	That's a disgusting price

03-06-2014, 07:49 AM	#73 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	At this price I may say F the C7 for a couple more years now I'm doing a 180 again. Not to mention being local. Sigh decisions! OMGWTFBBQ, GaleForce, jlo370z and 1 others like this. __________________ Project Z <--Click - Check out the link too many mods to list!

03-06-2014, 08:29 AM	#74 (permalink)
AdobePhil Base Member Join Date: Mar 2011 Location: Palm Harbor FL Posts: 211 Drives: 2010 370z Sport Trim Rep Power: 14	Son of a bitch. I wish I knew about this before I paid Nissan 11 grand for an entirely new stock motor. Oh well. I'm sure I'll be happy with the turbo when I stop by later today and see her on the Dyno. Sent from my SCH-I545 using Tapatalk __________________ 2010 370z Sport Trim / Anodized Racing Pedals / Injen CAI / Invidia Exhaust / Kinetix HFCs/ AEM 320ml Fuel Pump / Upgraded fuel lines and rails / Deutchwerks 850cc Fuel Injectors / Zex Nitrous / Uprev Tuned / /330whp N/A/452whp Nitrous

03-06-2014, 08:40 AM	#75 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Wow I would never put a stock block back in a car. You can almost always go built for the same price or less. AdobePhil and elperuano like this. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Build Components	theDreamer	Forced Induction	30	02-16-2016 12:48 PM
Engine Build	esfourteen	Forced Induction	190	07-26-2014 10:55 PM
Engine Build Thread	DIGItonium	Forced Induction	113	04-07-2013 02:17 PM
engine build time	Nissan370	Forced Induction	42	08-05-2012 10:48 AM