S&R Performance single turbo kit?

elperuano · 03-14-2014, 12:57 PM

Hmmmm ok guy.

Chuck33079 · 03-14-2014, 12:59 PM

Quote:

Originally Posted by valpozguy

Love? No do some searching in here and you will read that that is too much for stock block. I'm not saying any more . You will see. I looking forward to reading your I blew my motor now vsr is building me a motor thread.

Sent from my KFTT using Tapatalk

It's more than I'm comfortable with, but there are plenty of guys running that with no issues. And saying you're looking forward to him blowing a motor is just being a ****.

AdobePhil · 03-14-2014, 01:24 PM

Quote:

Originally Posted by valpozguy

Love? No do some searching in here and you will read that that is too much for stock block. I'm not saying any more . You will see. I looking forward to reading your I blew my motor now vsr is building me a motor thread.

Sent from my KFTT using Tapatalk

Cool. I'll PM you if it happens. I'd bake you a batch of cookies too but my maid only cleans.

In any case I was at the shop every day and about 6 people showed up with the same kit. They've all had it for years, one guy has had it for over 3 years running 100 octane making over 600 to the wheels. no problems.

So unless you want to put your tinfoil hat on and say all of these people were plants, then I'd say it's a solid and proven kit.

That's just my opinion though. Like I said... I'll PM you and even include one of those cool dancing emoticons with it.

O&G · 03-14-2014, 01:37 PM

Most the time it's that wtq that blows motors. I'm opposed to pushing a motor to it's limits everyday for the sake of a dyno number. Safe and reliable all day, plus you'll sleep better.

xxAGAVExx · 03-14-2014, 01:40 PM

Adobe, can't wait to see your kit, hopefully I'll get a chance if we get some meets going in Tampa.

Sent from my iPhone using Tapatalk

AdobePhil · 03-14-2014, 01:43 PM

Quote:

Originally Posted by O&G

Most the time it's that wtq that blows motors. I'm opposed to pushing a motor to it's limits everyday for the sake of a dyno number. Safe and reliable all day, plus you'll sleep better.

Totally agree. But to date no one running this setup on a stock block has blown their motor, and alot of them are putting up higher numbers than me.

There was a case where a turbo went bad, but it was replaced at no cost to the owner. Out of a total of over 90 kits, It seems the batting average is pretty decent.

I don't want to come off as "My kit won't break I believe!", so I'm just sticking to numbers. The VQ can run up to 700 safely, and my tune is well below that thresh hold.

TopgunZ · 03-14-2014, 03:09 PM

Quote:

Originally Posted by AdobePhil

Totally agree. But to date no one running this setup on a stock block has blown their motor, and alot of them are putting up higher numbers than me.

There was a case where a turbo went bad, but it was replaced at no cost to the owner. Out of a total of over 90 kits, It seems the batting average is pretty decent.

I don't want to come off as "My kit won't break I believe!", so I'm just sticking to numbers. The VQ can run up to 700 safely, and my tune is well below that thresh hold.

Hahahaha... Ok. Where is proof of this??? Cuz Id love to see it! And everyone else. You can't just throw out numbers with ZERO data to back it up.

valpozguy · 03-14-2014, 03:10 PM

I never said one thing about the turbo kit. It's the motor.

Sent from my KFTT using Tapatalk

elperuano · 03-14-2014, 03:23 PM

Well.. if its e85 that number is pretty close. FI has Faceglides ride on e85 making 630+

TopgunZ · 03-14-2014, 03:28 PM

Quote:

Originally Posted by valpozguy

I never said one thing about the turbo kit. It's the motor.

Sent from my KFTT using Tapatalk

Yeah...I know. Wheres the proof, data, dyno, anything.

TopgunZ · 03-14-2014, 03:33 PM

Quote:

Originally Posted by elperuano

Well.. if its e85 that number is pretty close. FI has Faceglides ride on e85 making 630+

This is still a long way off from 700 and who says that even at 630 its "SAFE". The only way to back up any number with the word safe or reliable in it is to pound on it for several months or years. At 700 and driving it hard I highly doubt this would constitute a safe motor.

Faceglide has been on his 630 for a whole 3 weeks? Yes, it may hold for years..BUT..there is zero proof of this at this point and wont be for many, many months.

Coming from the 35DE world we all know anything past 425 is borrowed time. We had seen many engines let go around that number and above. Do you think the internals on the 37vhr are so much better that you can push 700? Yes the motor has improvements but not any where near that much.

TopgunZ · 03-14-2014, 03:38 PM

Sorry to thread jack. But dont throw out ignorant claims and dumb up the community.

theDreamer · 03-14-2014, 03:38 PM

Here is a common picture of the rods.

Can this engine last above 600whp, yes but probably not long. If you want any use of long time VHR engine look at Phunk. Runs the greddy TT kit close to if not at 600whp on a stock engine and has been going for a long while (think he is past 60k miles with boost).

HR - VHR - DE

valpozguy · 03-14-2014, 03:45 PM

^^^^^^^^ Exactly ^^^^^^^^

Sent from my KFTT using Tapatalk

Mr.Squeeze · 03-14-2014, 04:57 PM

I have seen a stock block z motor blow with a GTM stage 1 TT kit making 500whp this was a friends car I have some pictures of it. Sharpcoop's stock block almost blew at 590whp when he tore down his engine before he built it a bent rod was found. I would not feel safe running a stock block z at 600whp it's on borrowed time. If you are then run E85 or 100 octane at a minimum.

03-14-2014, 01:37 PM	#64 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Most the time it's that wtq that blows motors. I'm opposed to pushing a motor to it's limits everyday for the sake of a dyno number. Safe and reliable all day, plus you'll sleep better. gbrettin likes this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-14-2014, 01:40 PM	#65 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	S&R Performance single turbo kit? Adobe, can't wait to see your kit, hopefully I'll get a chance if we get some meets going in Tampa. Sent from my iPhone using Tapatalk AdobePhil likes this. __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

03-14-2014, 03:38 PM	#72 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Sorry to thread jack. But dont throw out ignorant claims and dumb up the community. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

03-14-2014, 03:38 PM	#73 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Here is a common picture of the rods. Can this engine last above 600whp, yes but probably not long. If you want any use of long time VHR engine look at Phunk. Runs the greddy TT kit close to if not at 600whp on a stock engine and has been going for a long while (think he is past 60k miles with boost). HR - VHR - DE elperuano and valpozguy like this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

03-14-2014, 04:57 PM	#75 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20153	I have seen a stock block z motor blow with a GTM stage 1 TT kit making 500whp this was a friends car I have some pictures of it. Sharpcoop's stock block almost blew at 590whp when he tore down his engine before he built it a bent rod was found. I would not feel safe running a stock block z at 600whp it's on borrowed time. If you are then run E85 or 100 octane at a minimum. __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

03-14-2014, 12:57 PM	#61 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Hmmmm ok guy.

03-14-2014, 03:10 PM	#68 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	I never said one thing about the turbo kit. It's the motor. Sent from my KFTT using Tapatalk

03-14-2014, 03:23 PM	#69 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Well.. if its e85 that number is pretty close. FI has Faceglides ride on e85 making 630+

03-14-2014, 03:45 PM	#74 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	^^^^^^^^ Exactly ^^^^^^^^ Sent from my KFTT using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
S&R Performance First Single Turbo	SRperformance	Forced Induction	37	05-24-2015 11:22 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
S&R Performance Single Turbo Kit!!	SRperformance	Forced Induction	146	03-03-2014 07:40 PM
S&R Performance Single turbo release	SRperformance	Forced Induction	15	12-12-2012 11:04 PM