VQ37HR block limitations?

XwChriswX · 11-25-2009, 10:08 AM

Quote:

Originally Posted by bullitt5897

Now I am one of the first to be TT in this community and should have my car TT by the first of the year. We are expecting to run 500-550hp daily on the stock block.

He's also one of the first if not THE first to have a blown engine, so I'm pretty sure he knows full well what this engine can/can not handle.

G37Sam · 11-25-2009, 11:13 AM

Quote:

Originally Posted by bullitt5897

That is one of the most ignorant posts I have ever seen!

Honda did right when they made the s2000. Ask anyone at the track how well an s2000 does compared to other cars and the answer might surprise you! s2000's are lil monsters on the track I have seen kraftwerks supercharged s2000's @ 400hp eat up everything on the track!!

I know this is not a Honda vs Nissan discussion, but I just want to point out that a huge factor that contributes to the S2K being the beast it is on the track is due to its light weight and decent suspension setup. There's only so much 160lbft torque can do.

Black370ZTT · 11-25-2009, 11:55 AM

Quote:

Originally Posted by FuszNissan

AAM just dyno'd there first 370Z, it was making over 500 rwhp, and they are going to detune it.

We made 513 rwhp, they had to upgrade the fuel pump

bullitt5897 · 11-25-2009, 12:20 PM

Quote:

Originally Posted by G37Sam

I know this is not a Honda vs Nissan discussion, but I just want to point out that a huge factor that contributes to the S2K being the beast it is on the track is due to its light weight and decent suspension setup. There's only so much 160lbft torque can do.

True, Its all about purpose built. The s2000's chassis is amazing! I owned one for 3 yrs all the way from stock to fully modified N/A monster. It would have been cheaper to go FI

lol. However, because of the light weight the s2000 engine did not need 230ft/lbs of torque... but only 189ft/lbs which is what mine dyno'd at in stock form "AP2". It was purpose built and the car utilized it well! Alot of torque in the s2000 meant spinning out as the chassis was not designed for heaps of torque. The 370z being wider has the distinct advantage and the capabilities to be able to utilize gobs and gobs of torque

The s2000 used to eat up 350z's all day long on the tracks that had more turns than straight aways. but going to Roebling Roads or Road Atlanta those long stretches killed the S

Yes, Chris your right I blew the first stock motor on the forums but it was due to a factory default rod... thats all. I am in the same bucket as everyone else and strictly going on speculation at this point. I will however, leave the final decision up to sharif at forged since he knows exactly how much the VQ37 can handle in stock form as they have turbo'd the most VQ motors.

FuszNissan · 11-25-2009, 12:37 PM

Quote:

Originally Posted by Black370ZTT

We made 513 rwhp, they had to upgrade the fuel pump

Nice! What psi were you running, and what are you going to tune it too?

Black370ZTT · 11-25-2009, 01:07 PM

Quote:

Originally Posted by FuszNissan

Nice! What psi were you running, and what are you going to tune it too?

we are at 8 psi now. we had to upgrade the fuel pump so we could stay at 513

bullitt5897 · 11-25-2009, 01:18 PM

Quote:

Originally Posted by Black370ZTT

we are at 8 psi now. we had to upgrade the fuel pump so we could stay at 513

Do you have any specs of your build? I wanna see how all us TT guys will compare with different setups... This is much different than the 350z we have much more in terms of turbo options from the start thanks to vendors like GTM and AAM!

Red370 · 11-25-2009, 01:51 PM

Quote:

Originally Posted by bullitt5897

That is one of the most ignorant posts I have ever seen!

Honda did right when they made the s2000. Ask anyone at the track how well an s2000 does compared to other cars and the answer might surprise you! s2000's are lil monsters on the track I have seen kraftwerks supercharged s2000's @ 400hp eat up everything on the track!!!

The F series Motor is very stout especially when you consider ppl are boosting and still running 8k+ RPM limiters! To say anything Honda makes is a waste is ignorant! I used to hate honda before I owned one and truely understood the capabilities of the s2000! I will bet you cant take your car to lil tally raceway and pull a sub 1:15 in your car. When my s2000 had just coilovers I was running 1:08's for very lil torque it does dam good! Now the 370z is just sick on the track! I was pulling 1:12's on my warmup laps in the monsoon rain! completely stock! But this isnt a thread on Honda or nissan but rather yet the limitations we see of the stock block. Now I am one of the first to be TT in this community and should have my car TT by the first of the year. We are expecting to run 500-550hp daily on the stock block.

Nothing ignorant about my post, If you look at a few posts earlier, I stated that I owned one, and did for 3 years, and was supercharged via Science of Speed. Made 320whp, but 220ft/lbs, the F22 does not make tq, plain and simple, and this is very important when accelerating through a turn. And yes, I realize its a good track car, but as stated earlier, this is because of its light weight and suspension, not the power, and they fail epicly at tracks with long straightaways. At Willow Springs recently, the stock 370 routinely posted better lap times than boosted S2k's, which is something to say. I will post the link when I get home from work. And while I agree that they are wolves in sheeps clothing at the track, If I had to go back and build a small agile car, I'd go with a Miata, and drop an LS1/LS2 in it.

bullitt5897 · 11-25-2009, 03:40 PM

hahaha my buddy has a 99 miata and wants to throw a 5.0 ford in it :shakeshead: I told him LS1 aluminum block...

FuszNissan · 11-25-2009, 04:33 PM

Quote:

Originally Posted by Black370ZTT

we are at 8 psi now. we had to upgrade the fuel pump so we could stay at 513

Thanks for the info. I can't wait! Congrats, those are great numbers.

Red370 · 11-25-2009, 06:24 PM

Quote:

Originally Posted by bullitt5897

hahaha my buddy has a 99 miata and wants to throw a 5.0 ford in it :shakeshead: I told him LS1 aluminum block...

They make mount kits for the LS1, its great, bolts right up. Can you imagine? bet thats a blast to drive around the twisties.

Black370ZTT · 11-25-2009, 07:19 PM

Quote:

Originally Posted by FuszNissan

Thanks for the info. I can't wait! Congrats, those are great numbers.

Thanks, what options did you go with your kit? And is this for you or are you going to sell it as a package?

FuszNissan · 11-25-2009, 08:09 PM

I did the same package as you, with some DeFi gauges in the center dash cluster, that's about the only difference. Not sure if you did the HKS BOV"s and have them recirculate?

Haven't decided yet, may try to sell it and see what happens, but it will be at the St. Louis Auto Show.

Black370ZTT · 11-25-2009, 08:55 PM

Quote:

Originally Posted by FuszNissan

I did the same package as you, with some DeFi gauges in the center dash cluster, that's about the only difference. Not sure if you did the HKS BOV"s and have them recirculate?

Haven't decided yet, may try to sell it and see what happens, but it will be at the St. Louis Auto Show.

Yeah did the black hks recirc

dannemare · 02-25-2010, 10:37 AM

Quote:

Originally Posted by Red370

Yes, you've tuned one at 436hp, congratulations. I've seen them pop at 400. And what good is 400hp if your TQ isnt above 250ft/lbs? Anything Honda makes is a waste of time, effort and money, which is why I wont own another. Just an opinion.

Quote:

Originally Posted by G37Sam

I know this is not a Honda vs Nissan discussion, but I just want to point out that a huge factor that contributes to the S2K being the beast it is on the track is due to its light weight and decent suspension setup. There's only so much 160lbft torque can do.

Well, torque and hp (power) are part of the same mathematical equation and you are forgetting the importance of gearing and the fact that the transmission works as a torque multiplier. At the end of the day, what really accelerates a car is transmission output torque!

What makes an s2k comparable in acceleration to, say, an older 350z is due to the ultra-high redline (ie. you can stay in each gear longer which makes for a faster acceleration) combined with appropriate gear ratios. Just keep in mind to ALWAYS downshift if possible (without going too near redline as you'd have to upshift again in a split sec). A lower gear is ALWAYS faster than a higher gear. The nature of a car's transmission.

11-25-2009, 03:40 PM	#54 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	hahaha my buddy has a 99 miata and wants to throw a 5.0 ford in it :shakeshead: I told him LS1 aluminum block... __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

11-25-2009, 08:09 PM	#58 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	I did the same package as you, with some DeFi gauges in the center dash cluster, that's about the only difference. Not sure if you did the HKS BOV"s and have them recirculate? Haven't decided yet, may try to sell it and see what happens, but it will be at the St. Louis Auto Show. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts	NonStopTuning	Engine & Drivetrain	1443	11-26-2014 09:30 PM
underbody/engine block rust prevention?	ADmaster71690	Exterior & Interior	13	08-31-2009 06:34 PM
Engine Block Oxidation	tooohip	Engine & Drivetrain	10	07-20-2009 09:15 AM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
New kid on the block	VS-XX	Introduction	3	03-21-2009 02:49 AM