Nitrous build is finished

RyanWest · 02-27-2014, 03:46 PM

Quote:

Originally Posted by LNATKFRNG

Sorry used the phone for them, the first pic is of the passenger side tb I used a t tap on the green wire to pick up throttle position voltage the reason for using a t tap wS so that it can be unplugged from the window switch and plugged directly to the TPS sensor on the zex nmu. You will need this for both initial programming and in the case of dead or disconnected battery

Do you ever come to tampa man? you are near me! would be nice to see it in person

LNATKFRNG · 02-27-2014, 06:19 PM

Mega- zex recommends 6-10 inches from the tb mine are on the bottom of the silicone tubes at about 8 inches I used the same type of pipe reducer to adapt them as most systems use but I used a nut with nylon insert on the inside of the tube and thread locker when u get it tight the profile of both the in/outside part of the reducer is minimal

RW- yes it is a wet kit, wouldn't spray dry on a motor that's expensive.
I do get down to Tampa once in a while next time I do I'll pm it's always good to get to see some other z fans

02-27-2014, 06:19 PM	#2 (permalink)
LNATKFRNG Base Member Join Date: Jun 2013 Location: Ocala Posts: 158 Drives: 370z pearl white Rep Power: 12	Mega- zex recommends 6-10 inches from the tb mine are on the bottom of the silicone tubes at about 8 inches I used the same type of pipe reducer to adapt them as most systems use but I used a nut with nylon insert on the inside of the tube and thread locker when u get it tight the profile of both the in/outside part of the reducer is minimal RW- yes it is a wet kit, wouldn't spray dry on a motor that's expensive. I do get down to Tampa once in a while next time I do I'll pm it's always good to get to see some other z fans megalapagas likes this. __________________ '09 sport package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another BORING Nitrous build starts	chrischhorn	Forced Induction	84	08-20-2013 02:00 PM
Nitrous Build Questions	NitrousZ34	Forced Induction	5	03-29-2013 03:57 AM
My nitrous build lots of pics	valpozguy	Forced Induction	14	05-07-2012 05:30 PM
Nitrous Build	NeverBoneStck	Forced Induction	65	04-24-2012 09:24 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM