Nitrous build is finished

gbrettin · 08-13-2014, 10:12 AM

Quote:

Originally Posted by tommyguns

Can't say enough about the members of this forum! Thank you all so much!

So much good information on here and the people are awesome.

ANMVQ · 08-13-2014, 01:26 PM

yea there is always so much info on here its great,

I remember running my progressive control box on my 87 Monte SS 250 shot!!

Would run 75 @ 3200 ,RPM 200 @ 4200 RPM 250 @ 5200 RPM till 6700 RPM that thing was a raped ape ! LOL

tommyguns · 08-21-2014, 05:38 PM

Quote:

Originally Posted by gbrettin

It's a few bucks cheaper here:
ZEX 350Z 07-09 HR 350Z Nitrous System NOS

It was until I called to check on stock. Told the system was down, waited 7 hours for it to come back on and low and behold the price jumped $90.00 WTF, what bs. I emailed them back asking what happened, no answer!

madwi · 08-22-2014, 06:40 AM

Quote:

Originally Posted by tommyguns

Thanks for the help, I'm thinking the progressive controller will be the route for me. Just need a better understanding of the control as apposed to the switch. Any insight would be appreciated, which did you go with?

With a progressive unit you basically are controlling how much nitrous is being sprayed through out the RPMs. It can be % of shot increasing as rpms increase or based on time. For example, with a progressive controller you can set it for 10% at 2500 rpms and then it ramps up to 100% @ 6500 rpms. Time based example would be start at 10% and then increase to full hit over x amount of time.
With a window switch it is going to spray 100% as soon as it reads the minimum rpm and spray that until it hits the upper set limit.
The route I went is in your progressive controller thread

tommyguns · 08-22-2014, 11:40 AM

Quote:

Originally Posted by madwi

With a progressive unit you basically are controlling how much nitrous is being sprayed through out the RPMs. It can be % of shot increasing as rpms increase or based on time. For example, with a progressive controller you can set it for 10% at 2500 rpms and then it ramps up to 100% @ 6500 rpms. Time based example would be start at 10% and then increase to full hit over x amount of time.
With a window switch it is going to spray 100% as soon as it reads the minimum rpm and spray that until it hits the upper set limit.
The route I went is in your progressive controller thread

Thanks for the education, I really need it!

madwi · 08-23-2014, 03:34 AM

Quote:

Originally Posted by tommyguns

Thanks for the education, I really need it!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another BORING Nitrous build starts	chrischhorn	Forced Induction	84	08-20-2013 03:00 PM
Nitrous Build Questions	NitrousZ34	Forced Induction	5	03-29-2013 04:57 AM
My nitrous build lots of pics	valpozguy	Forced Induction	14	05-07-2012 06:30 PM
Nitrous Build	NeverBoneStck	Forced Induction	65	04-24-2012 10:24 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM