Good amount of work and cutting needed to fit the GTM radiator didn't come with any instructions. Have to hack it all up pretty good to get it to fit.

http://img.tapatalk.com/d/14/03/04/5u5yvuga.jpg

http://img.tapatalk.com/d/14/03/04/utene2e2.jpg

http://img.tapatalk.com/d/14/03/04/upe8e3a7.jpg

http://img.tapatalk.com/d/14/03/04/emamumes.jpg

Does anyone here have any wiring instructions on the GTM spal fans and relay to stock wiring? For some reason I can't find any wiring to the stock harness on the service manual. Need asap!

Well that sucks.

Digging through the service manual (taking awhile), and found this page.

http://www.the370z.com/attachment.ph...1&d=1394052242

Here we go


http://www.gtmotorsports.com/Manuals...structions.pdf

^^^whos that?

^lolololol

perfect THANK YOU, just what I needed SAM!!

TheDreamer thanks for posting that info as well it helps a lot. I can turn the car on if not I can just figure out the pin outs

Atleast radiator is in, still need to wire in relay and Sam to forward the canned tune and will fire up the car check for any leaks etc

http://img.tapatalk.com/d/14/03/06/re5eje5a.jpg

http://img.tapatalk.com/d/14/03/06/gu2emysa.jpg

Everything is installed and waiting on the base tune to get it in the street and test for leaks then goes for dyno tune....

http://img.tapatalk.com/d/14/03/15/uzu6azab.jpg

You don't need a tune to start it and let it warm up and idle

I wonder if you'll get the tune from Sam quick. He seems to like you and respond quickly. Let us know when u get ur base tune!

Frank thanks, installer actually did start the car and it idles just fine. I am having an issue with wiring the spal fans so I ended up just adding a switch for now. The high output spal fans are NO joke, sounds like a space ship about to take off. Most likely I will be buying the Spal fan controller next.

Spal fans are the best you can buy,bar none!!!

Does anyone recirculate the bypass valve back to the intakes?
I was just sent this: Instagram