Meth/water injection?

Chuck33079 · 01-29-2014, 10:38 AM

That should be enough for oil and water, provided you've got the fans set to turn on early enough and you're running a 75/25 water/antifreeze mix. Meth/water should handle all your IAT and heatsoak issues. If it were my car I'd look into a larger heat exchanger and larger radiator as well. Anything you can do to keep the car cool will help.

JWillis72 · 01-29-2014, 11:03 AM

Quote:

Originally Posted by Chuck33079

That should be enough for oil and water, provided you've got the fans set to turn on early enough and you're running a 75/25 water/antifreeze mix. Meth/water should handle all your IAT and heatsoak issues. If it were my car I'd look into a larger heat exchanger and larger radiator as well. Anything you can do to keep the car cool will help.

I don't think I have the room for a larger radiator or heat exchanger, the nose of my car as a crap load of stuff in it. I'm actually running water and Water Wetter only since it never freezes here and my car will never be anywhere it does while I own it!

Chuck33079 · 01-29-2014, 11:06 AM

A CSF radiator fits just fine. Any size difference is on the engine bay side. And others have managed to squeeze a bigger heat exchanger in there.

theDreamer · 01-29-2014, 11:06 AM

Quote:

Originally Posted by JWillis72

I don't think I have the room for a larger radiator or heat exchanger, the nose of my car as a crap load of stuff in it. I'm actually running water and Water Wetter only since it never freezes here and my car will never be anywhere it does while I own it!

The CSF radiator fits in the factory spot without much if any modifications, it is what I have.
Other upgrade is the fans, GTM has a pre-made kit that plugs in and goes. You can probably piece it together cheaper but will have to wire it all up.

Chuck33079 · 01-29-2014, 11:09 AM

Quote:

Originally Posted by theDreamer

The CSF radiator fits in the factory spot without much if any modifications, it is what I have.
Other upgrade is the fans, GTM has a pre-made kit that plugs in and goes. You can probably piece it together cheaper but will have to wire it all up.

I've got the fans on the list of "Items I'll buy from GTM once they get back in the business of actually sending parts out to people who send them money".

There's also a Nissan thermostat that opens ten degrees cooler than stock. I've got one on a shelf in the garage for the next time I'm in there where I can get to it.

theDreamer · 01-29-2014, 11:11 AM

Quote:

Originally Posted by Chuck33079

I've got the fans on the list of "Items I'll buy from GTM once they get back in the business of actually sending parts out to people who send them money".

Same, I am waiting for summer to finish my data logging with my hood and see what difference it made and then throw in fans on top.
Should bug a few other companies to make a similar setup, fan shroud, fans, wiring, all in one & ready to go.

Chuck33079 · 01-29-2014, 11:12 AM

Quote:

Originally Posted by theDreamer

Same, I am waiting for summer to finish my data logging with my hood and see what difference it made and then throw in fans on top.
Should bug a few other companies to make a similar setup, fan shroud, fans, wiring, all in one & ready to go.

I'd even pay a little more for the same thing from a company who will take my money, process the order and ship me goods in a timely fashion.

JWillis72 · 01-29-2014, 11:42 AM

Thank you both for the info on the radiator, I will have to look into that. I got on the list for GTM and even had a check ready to be mailed out but decided I didn't want to be part of that. I own a legal machine gun and was in a group by for new parts for it and lost some money so I'm just not very trusting of buying things before they are built. I would gladly pay more for the confidence that I will get what I'm paying for.

theDreamer · 01-29-2014, 11:47 AM

On the topic of water/meth injection, what are some of the pros v cons using this system?
JWillis, you want to use it for track purposes only, how hard is it to set it up like that?

DEpointfive0 · 01-29-2014, 11:58 AM

Quote:

Originally Posted by JWillis72

If this is true thats what I will use, I want as much insurance as I can get! We are not going to tune for its extra power, just for cooling and safety. My car is a 7AT with 302 tq at the wheels so with the trans ratted for 300 I don't want more. Thanks for the help!

Where did you find this neat little fact on 300ft lbs?

theDreamer · 01-29-2014, 12:05 PM

Comes from my research and 7AT thread:
Forced Induction & 7AT 370z Info

TBumacz Google

G37sHKS · 01-29-2014, 12:10 PM

Quote:

Originally Posted by Chuck33079

I've got the fans on the list of "Items I'll buy from GTM once they get back in the business of actually sending parts out to people who send them money".

There's also a Nissan thermostat that opens ten degrees cooler than stock. I've got one on a shelf in the garage for the next time I'm in there where I can get to it.

Where you get that from? whats the part number please?

Chuck33079 · 01-29-2014, 12:11 PM

Quote:

Originally Posted by G37sHKS

Where you get that from? whats the part number please?

If I'm remembering right, it's from the 2008 G37. Only the 2008 for some reason. It's at home, so the part number will be later.

G37sHKS · 01-29-2014, 12:14 PM

Weird. what makes you so sure its not the same on all VHR motors?

DEpointfive0 · 01-29-2014, 12:15 PM

Quote:

Originally Posted by theDreamer

Comes from my research and 7AT thread:
Forced Induction & 7AT 370z Info

TBumacz Google

Grassy-áss

Didn't know it was straight advertised.

01-29-2014, 10:38 AM	#16 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	That should be enough for oil and water, provided you've got the fans set to turn on early enough and you're running a 75/25 water/antifreeze mix. Meth/water should handle all your IAT and heatsoak issues. If it were my car I'd look into a larger heat exchanger and larger radiator as well. Anything you can do to keep the car cool will help. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

01-29-2014, 11:06 AM	#18 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	A CSF radiator fits just fine. Any size difference is on the engine bay side. And others have managed to squeeze a bigger heat exchanger in there. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

01-29-2014, 11:47 AM	#24 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	On the topic of water/meth injection, what are some of the pros v cons using this system? JWillis, you want to use it for track purposes only, how hard is it to set it up like that? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

01-29-2014, 12:05 PM	#26 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Comes from my research and 7AT thread: Forced Induction & 7AT 370z Info TBumacz Google __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

01-29-2014, 12:14 PM	#29 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Weird. what makes you so sure its not the same on all VHR motors? __________________ G37 BUILD UNDER CONSTRUCTION

01-29-2014, 11:42 AM	#23 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Thank you both for the info on the radiator, I will have to look into that. I got on the list for GTM and even had a check ready to be mailed out but decided I didn't want to be part of that. I own a legal machine gun and was in a group by for new parts for it and lost some money so I'm just not very trusting of buying things before they are built. I would gladly pay more for the confidence that I will get what I'm paying for.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen SC kit with meth injection	gussyturbo z	Forced Induction	17	05-30-2013 06:34 PM
[FOR SALE] STS meth kit	blackonorange	Parts for sale (Private Classifieds)	0	08-10-2012 12:18 AM
Any benefit to installing meth injection on Stillen SC?	Neo187H	Forced Induction	5	04-16-2012 04:28 PM
how does water/meth injection work?	sojirovskensi	Forced Induction	5	10-04-2011 01:20 AM
Water/Meth injection	LateralG'z	Forced Induction	35	07-14-2010 02:22 AM