Boosted 2013 370z Nismo

elperuano · 01-11-2014, 03:46 PM

Lol @ warranty

Z&I · 01-11-2014, 09:00 PM

Quote:

Originally Posted by JWillis72

The guys that installed mine missed that step also! My car was driving my tuner nuts trying to figure it out. We were looking at the instructions (Stillen should make the importance of that small note bigger) one more time and found it. We were 10 hours into the tune when we found it so I stuck a piece of cardboard in front of the filter and it all went away.

Yikes ! These are those little blips in the installs that are hard learned lessons for our shops to have to deal with !

Glad it all went away ... those little foxes can be crafty little creatures and definitely to find !

JWillis72 · 01-12-2014, 10:34 AM

Quote:

Originally Posted by Z&I

Yikes ! These are those little blips in the installs that are hard learned lessons for our shops to have to deal with !

Glad it all went away ... those little foxes can be crafty little creatures and definitely to find !

Thankfully the tuner was great, we spent 10 hours trying to get it perfect the first day and 6 the second day. The car has run absolutely perfect since.

future370zzz · 01-13-2014, 01:19 AM

Quote:

Originally Posted by Z&I

Nice G37x (I have one as well - now my DD with some 'cosmetic' enhancements)

May I ask as to the specifics of the impeller upgrade ???

My kit has the Vortech V3 and so far I haven't been able to nail down the right impeller.

Contacted 928motorsports and also Vortech ...
Need to know the directional airflow CW or CCW ...

Still waiting to hear from Vortech...

The car is just about to go into the shop...

Thanks,

Bob

The impeller upgrade through Vortech is $395 plus shipping. It will bring the Stillen Vortech SCi unit up to a Si flow level (9.52% more) and increase boost throughout the rpm band. I went with Vortech since it is "OEM" and in this case I felt more comfortable with that. Let's hope they don't f it up.

JWillis72 · 01-28-2014, 03:40 PM

Quote:

Originally Posted by future370zzz

I'm curious to see how much it lowers the temp under the hood. Do you plan to do a before/after test?

I ended up blocking off the top two vent because they were over the battery and break box but the hood still seems to help with heat. I haven't seen it over 180 oil temp and before the hood I would see close to 200 in stop and go traffic.

JWillis72 · 02-14-2014, 02:26 PM

Just to follow up on the hood, it has helped with oil temps a bunch. This morning it was cool here for Florida (in the 60s) and I got on the interstate with the oil temp at 180 where it normally is and drove 30-40 min when I got off the interstate the oil was around 165. I have never seen the oil temp drop while driving 80 mph before today. You can also see the heat coming out of the vents at a stop light, it looks like heat coming off a hot road in the middle of summer.

Hopefully the Aquamist meth injection system will be one the car next week and I will be done worrying about heat. Fingers crossed!

diego@vossen · 02-24-2014, 12:05 PM

I am a big fan of the Stillen SC and just got one for my G37. Great thread!

diego@vossen · 02-24-2014, 12:12 PM

Quote:

Originally Posted by TK2013

If you want long term support, and a safer build with consistent power and less worries, the Super Charger hands down is the way to go. I've had nothing but fun with it, and have not one second guessing of buying the kit.

- Tim

This was my main reason for going with Stillen

TK2013 · 06-14-2014, 06:13 AM

Hey Guys, wanted to post an update. So since the install we had a slight issue, that has finally been resolved. I had a trip planned to California and ended up visiting the Stillen shop. I need to highly mention this, GREAT customer service! My Z is now running the 9lb pulley, and still currently doing some fine tuning. Will be upgrading the exhaust and crank pulley within the next week. Over all I've been overly pleased and impressed with the performance and power gains and with what this kit has provided :-)

Dyno numbers will come soon as once I get the last few kinks out of my tune. (Sucks living in Prescott Valley and being up 5100 feet)

Hotrodz · 06-14-2014, 11:03 AM

I hear you man, it's better here at 3,500ft, but it's still not the same as under 2000ft or near sea level. I maybe headed your way the first of next month. It's my turn in the hopper for jury duty there at Federal District Court. Maybe we can meet up.

ANMVQ · 06-18-2014, 02:31 PM

So your running the 9LB pulley and the Impeller? Good luck with that, :/

TK2013 · 06-20-2014, 12:25 AM

Yo Hotrodz, if you come up lemme know. I typically have Wed\Thur's off work :-D

Should be getting my new exhaust (Went with Stillen's Cat back) and the Crank Pulley from them, plan to have it installed this coming up Thursday :-D

(P.s.
If you run this kit at sea level.. say around.. Costa Mesa. 54ft. (wink) um.. gfg =D Need tires.. badly...)

Hotrodz · 06-20-2014, 09:08 AM

The changed the trial venue to Phoenix

TK2013 · 06-21-2014, 02:49 AM

Well that doesn't help us showing off each others cars! =P

02-14-2014, 02:26 PM	#66 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Just to follow up on the hood, it has helped with oil temps a bunch. This morning it was cool here for Florida (in the 60s) and I got on the interstate with the oil temp at 180 where it normally is and drove 30-40 min when I got off the interstate the oil was around 165. I have never seen the oil temp drop while driving 80 mph before today. You can also see the heat coming out of the vents at a stop light, it looks like heat coming off a hot road in the middle of summer. Hopefully the Aquamist meth injection system will be one the car next week and I will be done worrying about heat. Fingers crossed! Last edited by JWillis72; 02-14-2014 at 02:35 PM.

06-14-2014, 06:13 AM	#69 (permalink)
TK2013 Base Member Join Date: Jul 2013 Location: Prescott Valley Posts: 26 Drives: Nissan 370z, Nismo Rep Power: 12	2013 370z Nismo with Stillen Supercharger Hey Guys, wanted to post an update. So since the install we had a slight issue, that has finally been resolved. I had a trip planned to California and ended up visiting the Stillen shop. I need to highly mention this, GREAT customer service! My Z is now running the 9lb pulley, and still currently doing some fine tuning. Will be upgrading the exhaust and crank pulley within the next week. Over all I've been overly pleased and impressed with the performance and power gains and with what this kit has provided :-) Dyno numbers will come soon as once I get the last few kinks out of my tune. (Sucks living in Prescott Valley and being up 5100 feet)

06-14-2014, 11:03 AM	#70 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I hear you man, it's better here at 3,500ft, but it's still not the same as under 2000ft or near sea level. I maybe headed your way the first of next month. It's my turn in the hopper for jury duty there at Federal District Court. Maybe we can meet up. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

06-18-2014, 02:31 PM	#71 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	So your running the 9LB pulley and the Impeller? Good luck with that, :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

06-20-2014, 09:08 AM	#73 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	The changed the trial venue to Phoenix __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-11-2014, 03:46 PM	#61 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Lol @ warranty

02-24-2014, 12:05 PM	#67 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 14	I am a big fan of the Stillen SC and just got one for my G37. Great thread!

06-20-2014, 12:25 AM	#72 (permalink)
TK2013 Base Member Join Date: Jul 2013 Location: Prescott Valley Posts: 26 Drives: Nissan 370z, Nismo Rep Power: 12	Yo Hotrodz, if you come up lemme know. I typically have Wed\Thur's off work :-D Should be getting my new exhaust (Went with Stillen's Cat back) and the Crank Pulley from them, plan to have it installed this coming up Thursday :-D (P.s. If you run this kit at sea level.. say around.. Costa Mesa. 54ft. (wink) um.. gfg =D Need tires.. badly...)

06-21-2014, 02:49 AM	#74 (permalink)
TK2013 Base Member Join Date: Jul 2013 Location: Prescott Valley Posts: 26 Drives: Nissan 370z, Nismo Rep Power: 12	Well that doesn't help us showing off each others cars! =P

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2013 nismo 370z vs 2014 nismo 370z	Nismo450Z	Nismo 370Z	37	09-18-2014 06:06 PM
2013 370Z Nismo	dbeck4	New 370Z Owner	5	11-16-2013 06:02 PM
Trade 2013 370Z Nismo for 2013 G37 IPL Convertible?	13nismo370z	Nismo 370Z	18	08-18-2013 11:48 PM
New owner of a 2013 370z nismo	The Z master	New 370Z Owner	6	08-06-2013 10:25 AM
New 2013 370Z Nismo	isayimandrew	Nismo 370Z	28	02-17-2013 10:34 AM