Blown Motor, Engine Rebuild/Replacement.

COSMO · 02-02-2015, 05:03 PM

Just brain storming here but since some of these single turbo kits claim to spool just as fast as a twin turbo then why didn't Nissan just design a big single turbo for the gtr..?? ? Also it appears the new z will also be a twin turbo.. I'm sure Nissan knows what they are doing by making v motors a twin turbo setup..

javi370z · 02-02-2015, 05:16 PM

Can't help but notice you really have something against boosted performance don't you. Since obviously your not talking about the vsr single turbo kit when your always defending that shop.

COSMO · 02-02-2015, 05:23 PM

Not at all, actually I was going to buy a kit from bp but didn't want to spend thousands of more dollars not knowing where he may be in the near future.. As far as the vsr single turbo goes, yes that could be improved in many ways just like bp has revised their kit already a few times only to make it better.. Also I have yet to hear anyone blowing a motor with the bp kit which is amazing but that just shows how well it was designed..

Quote:

Originally Posted by javi370z

Can't help but notice you really have something against boosted performance don't you. Since obviously your not talking about the vsr single turbo kit when your always defending that shop.

Skyscraper · 02-02-2015, 05:28 PM

Quote:

Originally Posted by COSMO

Just brain storming here but since some of these single turbo kits claim to spool just as fast as a twin turbo then why didn't Nissan just design a big single turbo for the gtr..?? ? Also it appears the new z will also be a twin turbo.. I'm sure Nissan knows what they are doing by making v motors a twin turbo setup..

Isn't the whole point of a twin turbo set up to avoid turbo lag?

COSMO · 02-02-2015, 05:32 PM

Yes, actually mike from gtm wrote a great article of the comparison between a single vs a twin.. Don't get me wrong a single turbo isn't bad at all considering it is a bit less money and Alot easier to install.

TopgunZ · 02-03-2015, 12:52 AM

Quote:

Originally Posted by VSS370z

Thanks for the good info COSMO. I'll do something similar thanks man

I did my first as soon as the oil temp read 180. I have a greddy magnetic plug and there were enough particulates to make it worth it. Im doing my second after 50 miles then again at 1000. Using regular oil in 10w 30.

COSMO · 02-03-2015, 07:57 AM

Why the 10w instead of the 5w? For break in you actually want the clearance as close a possible so in can break in correctly. I also have a magnetic oil drain plug to help monitor particles.

Have you started a thread on your motor build and specifications?

Changing the subject but I saw a new Z06 at the casino's this past weekend and it was pretty nice. I have never seen rotors front or back so big. Can't imagine what those things weigh after getting a good look at them..

Quote:

Originally Posted by TopgunZ

I did my first as soon as the oil temp read 180. I have a greddy magnetic plug and there were enough particulates to make it worth it. Im doing my second after 50 miles then again at 1000. Using regular oil in 10w 30.

TopgunZ · 02-03-2015, 09:12 AM

The builder of my engine told me to use 10W. He has built many engines so i figured he would know better than I would so i didn't question it. I could ask him why recommended that weight.

No build thread, but I will start a new one once I get this thing back on the dyno.

COSMO · 02-03-2015, 09:31 AM

Wont get into a debate but the 370z and the gtr are both broken in on 5-30 with the same oem bearings.. What comp did you go with and overbore?

TopgunZ · 02-03-2015, 10:03 AM

I am just .01 over since it was dropped into an engine with 100 miles on it.

11:1 compression because I only run E85 and wanted the low end a bit snappier. Plus it helps spool response.

GTM Arias extreme duty pistons.

COSMO · 02-03-2015, 10:23 AM

Didn't know Arias was making 11.1 pistons now. I know me and Charles had first custom CP pistons made 11.1, Right on...

TopgunZ · 02-03-2015, 01:57 PM

GTM customs up the Arias.

COSMO · 02-03-2015, 02:04 PM

GTM? bahahahahaha... Good luck with that..

TopgunZ · 02-03-2015, 02:13 PM

What the hell do you mean good luck? They are already in my running motor.

bullitt5897 · 02-03-2015, 02:16 PM

TopGunz dont worry about him. The pistons you have came straight from Arias and are built to a custom spec. I have them in my Z and they work Great!

02-03-2015, 09:12 AM	#1268 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	The builder of my engine told me to use 10W. He has built many engines so i figured he would know better than I would so i didn't question it. I could ask him why recommended that weight. No build thread, but I will start a new one once I get this thing back on the dyno. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-03-2015, 10:03 AM	#1270 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I am just .01 over since it was dropped into an engine with 100 miles on it. 11:1 compression because I only run E85 and wanted the low end a bit snappier. Plus it helps spool response. GTM Arias extreme duty pistons. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-03-2015, 10:23 AM	#1271 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Didn't know Arias was making 11.1 pistons now. I know me and Charles had first custom CP pistons made 11.1, Right on... Last edited by COSMO; 02-03-2015 at 11:25 AM.

02-03-2015, 01:57 PM	#1272 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	GTM customs up the Arias. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-03-2015, 02:13 PM	#1274 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	What the hell do you mean good luck? They are already in my running motor. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-02-2015, 05:03 PM	#1261 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Just brain storming here but since some of these single turbo kits claim to spool just as fast as a twin turbo then why didn't Nissan just design a big single turbo for the gtr..?? ? Also it appears the new z will also be a twin turbo.. I'm sure Nissan knows what they are doing by making v motors a twin turbo setup..

02-02-2015, 05:16 PM	#1262 (permalink)
javi370z Base Member Join Date: Nov 2012 Location: dallas Posts: 118 Drives: 370z Rep Power: 13	Can't help but notice you really have something against boosted performance don't you. Since obviously your not talking about the vsr single turbo kit when your always defending that shop.

02-02-2015, 05:32 PM	#1265 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Yes, actually mike from gtm wrote a great article of the comparison between a single vs a twin.. Don't get me wrong a single turbo isn't bad at all considering it is a bit less money and Alot easier to install.

02-03-2015, 09:31 AM	#1269 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Wont get into a debate but the 370z and the gtr are both broken in on 5-30 with the same oem bearings.. What comp did you go with and overbore?

02-03-2015, 02:04 PM	#1273 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	GTM? bahahahahaha... Good luck with that..

02-03-2015, 02:16 PM	#1275 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	TopGunz dont worry about him. The pistons you have came straight from Arias and are built to a custom spec. I have them in my Z and they work Great! wsarver likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM