Blown Motor, Engine Rebuild/Replacement.

COSMO · 10-29-2014, 02:25 PM

Like I said since I switched to a lot better oil the next time I do another oil change in a few thousand miles I will send yet another sample to blackstone in hopes that specific wear item is down considerately... Fingers crossed..

Quote:

Originally Posted by 1slow370

Depending on your piston coating the moly could be skirt coating, if the wear continues listen for piston slap it may have a loose bore

Sent from my HTCONE using Tapatalk

1slow370 · 10-29-2014, 02:31 PM

I'm not saying it is bad I'm just saying moly sometimes comes from skirt coating depending on the coating, it is also in all the aftermarket assembly lube so it could be normal but keep an eye on it. if it gets bad piston slap will be the noise to look for and the cause would be a loose or tight bore if that happens.

COSMO · 10-30-2014, 05:34 PM

Look who gtm is now using to represent their products here on the forum... Check out all of the pictures with gtm water marks in them. This is their sneaky way of presenting their parts here on the forum since they were banned for ripping so many people off!!!

World Record NA VHR Build

This should not be allowed here. Its pretty obvious what is going on here with gtm..

COSMO · 10-30-2014, 07:04 PM

well it seems I'm being warned again to tone things down because the reps here feel I am bashing gtm way too much.

Here is what I wrote back to trips regarding this matter once again with gtm:

I understand your concern but this is not mere bashing here. Can you not see between the lines what is going on here. Do you not fully understand how many people on this forum that you represent were robbed and still continue to fight to get their money back from gtm? It's not bashing at this point my friend it's insane that the forum reps keep allowing them to slip through the loopholes on this forum with no disregard to its members..

I can't tell you guys how disappointed I am with our forum and how it still allows others here to advirtise for a company that has hurt so many people...

COSMO · 10-30-2014, 07:10 PM

I'm sure at this point my reply will be deleted as my last one just was because of stating the facts of how gtm can still advirtise here through members with no disregard to its members after gtm ripped off many people here.. That's right people if the moderators do not like what you write they just delete things here again protecting gtm giving them the green light to steal from others who do not know what kind of company they are.. The sad thing is it is not bashing it is facts about gtm and how they now are using forum members to advertise their products.. Total dictation here....

Trips · 10-30-2014, 07:32 PM

Why do you need to drive your own thread off topic with you own personal GTM issue.

Like I told you WE get it and to move on.

If a member wants to share his pics and they happen to be watermarked? WHO CARES

He is not promoting the shop but sharing the parts it took to get his build to put out the numbers his claiming, and IF members are STILL wanting to do business with that shady company? There's nothing you or I can do to stop it.

So either cool your jets or you'll find yourself no longer a part of the forum.

Im not going to delete anything in here.

1slow370 · 10-30-2014, 08:26 PM

I had Sam email me pics for my thread cuz I'm not taking my **** apart to post pics of it, Sam gladly sent me photos, deal I dropped over $15k and I'm trying to get him to send me more pics of my clutch and stuff and the first pic of the manifold was taken with my cellphone.

TopgunZ · 10-30-2014, 09:02 PM

Lol. Go back and read the first post of this thread.

Z&I · 10-30-2014, 11:02 PM

Quote:

Originally Posted by 1slow370

I had Sam email me pics for my thread cuz I'm not taking my **** apart to post pics of it, Sam gladly sent me photos, deal I dropped over $15k and I'm trying to get him to send me more pics of my clutch and stuff and the first pic of the manifold was taken with my cellphone.

Hey ... you gotta do what you gotta do ... and I'm all for it !!!
Not too many options out there for us who are building their cars and motors.
Each and Every one seems to be a 1-off project.

We've all had to learn from reading about every one elses trials and tribulations.

In the end - each finished project is a personal statement of your vision - and hopefully it is a source of personal pride and a reward unto itself.

Mine will be done relatively soon (the next 3 months ?) ... it's been a 3 year project of upgrades and in planning and further development, but this past year it has been an enormous headache and one big financial drain.

Right now I dread thinking back on the unfinished project and the toll it has taken on my paycheck, but I am committed to seeing it thru.

I know you can't put a price tag on the time and effort put in to the build, and the escalating price tag of putting it all together, it can be mind boggling.

In the end ... when the bank account has healed ... we do have something unique ... a 1-off personal car and a 1-off learning experience ...

taroslush · 10-31-2014, 02:43 AM

Quote:

Originally Posted by COSMO

I'm sure at this point my reply will be deleted as my last one just was because of stating the facts of how gtm can still advertise here through members with no disregard to its members after gtm ripped off many people here.. That's right people if the moderators do not like what you write they just delete things here again protecting gtm giving them the green light to steal from others who do not know what kind of company they are.. The sad thing is it is not bashing it is facts about gtm and how they now are using forum members to advertise their products.. Total dictation here....

If you dislike GTM so much, maybe you should remove those three letters from under your avatar...

ATLz · 01-10-2015, 08:08 PM

Any updates??

COSMO · 01-10-2015, 08:42 PM

Just a quick update, the car has been running just fine until the crack on the drivers side has gotten much worse causing bank2 to run ultra rich. About to send a second sample off to blackstone. Sold my wife's beemer and bought her a g37 coupe and she loves it...
I still can't believe all of the turbo kits now popping up here on the forum..

Chuck33079 · 01-10-2015, 08:54 PM

Is there any way you've just got an O2 sensor going out?

COSMO · 01-10-2015, 09:03 PM

That's what I was thinking at first but after switching them up and doing some logs the problems was still there. It wasn't until I shined a flashlight under the heat shield to see all of the black exhaust coming from the manifold.. Going to take it off and have it welded up and see how long that is going to last....

Chuck33079 · 01-10-2015, 09:05 PM

My local shop said they would be able to weld it no problem. I'm sure someone local can do the same. Were yours coated? Can you get it out without pulling the motor again?

10-29-2014, 02:31 PM	#1232 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	I'm not saying it is bad I'm just saying moly sometimes comes from skirt coating depending on the coating, it is also in all the aftermarket assembly lube so it could be normal but keep an eye on it. if it gets bad piston slap will be the noise to look for and the cause would be a loose or tight bore if that happens. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

10-30-2014, 05:34 PM	#1233 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Look who gtm is now using to represent their products here on the forum... Check out all of the pictures with gtm water marks in them. This is their sneaky way of presenting their parts here on the forum since they were banned for ripping so many people off!!! World Record NA VHR Build This should not be allowed here. Its pretty obvious what is going on here with gtm.. elperuano likes this.

10-30-2014, 07:04 PM	#1234 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	well it seems I'm being warned again to tone things down because the reps here feel I am bashing gtm way too much. Here is what I wrote back to trips regarding this matter once again with gtm: I understand your concern but this is not mere bashing here. Can you not see between the lines what is going on here. Do you not fully understand how many people on this forum that you represent were robbed and still continue to fight to get their money back from gtm? It's not bashing at this point my friend it's insane that the forum reps keep allowing them to slip through the loopholes on this forum with no disregard to its members.. I can't tell you guys how disappointed I am with our forum and how it still allows others here to advirtise for a company that has hurt so many people... elperuano likes this.

10-30-2014, 07:32 PM	#1236 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Why do you need to drive your own thread off topic with you own personal GTM issue. Like I told you WE get it and to move on. If a member wants to share his pics and they happen to be watermarked? WHO CARES He is not promoting the shop but sharing the parts it took to get his build to put out the numbers his claiming, and IF members are STILL wanting to do business with that shady company? There's nothing you or I can do to stop it. So either cool your jets or you'll find yourself no longer a part of the forum. Im not going to delete anything in here. SPOHN and 2011 Nismo#91 like this. __________________ Last edited by Trips; 10-30-2014 at 10:28 PM. Reason: Spelling correction

10-30-2014, 08:26 PM	#1237 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	I had Sam email me pics for my thread cuz I'm not taking my ** apart to post pics of it, Sam gladly sent me photos, deal I dropped over $15k and I'm trying to get him to send me more pics of my clutch and stuff and the first pic of the manifold was taken with my cellphone. GaleForce and Z&I like this. __________________ ANSWER PRICE LIST** Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

10-30-2014, 07:10 PM	#1235 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I'm sure at this point my reply will be deleted as my last one just was because of stating the facts of how gtm can still advirtise here through members with no disregard to its members after gtm ripped off many people here.. That's right people if the moderators do not like what you write they just delete things here again protecting gtm giving them the green light to steal from others who do not know what kind of company they are.. The sad thing is it is not bashing it is facts about gtm and how they now are using forum members to advertise their products.. Total dictation here....

10-30-2014, 09:02 PM	#1238 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Lol. Go back and read the first post of this thread. jwick and BBRSpeedWorks like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-10-2015, 08:08 PM	#1241 (permalink)
ATLz Banned Join Date: Nov 2014 Location: atl Posts: 19 Drives: 370z Rep Power: 0	Any updates??

01-10-2015, 08:42 PM	#1242 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Just a quick update, the car has been running just fine until the crack on the drivers side has gotten much worse causing bank2 to run ultra rich. About to send a second sample off to blackstone. Sold my wife's beemer and bought her a g37 coupe and she loves it... I still can't believe all of the turbo kits now popping up here on the forum..

01-10-2015, 08:54 PM	#1243 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Is there any way you've just got an O2 sensor going out? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

01-10-2015, 09:03 PM	#1244 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	That's what I was thinking at first but after switching them up and doing some logs the problems was still there. It wasn't until I shined a flashlight under the heat shield to see all of the black exhaust coming from the manifold.. Going to take it off and have it welded up and see how long that is going to last....

01-10-2015, 09:05 PM	#1245 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	My local shop said they would be able to weld it no problem. I'm sure someone local can do the same. Were yours coated? Can you get it out without pulling the motor again? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM