Blown Motor, Engine Rebuild/Replacement.

COSMO · 08-19-2014, 05:05 PM

Still no word from the transport company.. The saga continues...

BBRSpeedWorks · 08-19-2014, 05:15 PM

i changed mine right be for i started my turbo build I just dropped the tranny and put the new one in with a socket and hammer...took about 2 hours for the job thats tranny out and back in....good luck hope everthing works out

elperuano · 08-19-2014, 05:51 PM

Damn sorry to hear your troubles Cosmo. Kinda sucks to read VSR has another 2 complaints in this thread. Was considering getting a tune from them.

COSMO · 08-19-2014, 06:52 PM

I learned when it rains it pours but I'm going to give vsr a chance to correct this and get me up and running.. Being self employed it actually cost me to take time and days at a time to work on my car...

COSMO · 08-20-2014, 09:03 PM

Vsr is going to have the car picked up this sat morning and they are supposed to install a rear main seal and break in the new motor they built, install the 1000cc injectors then tune it. Trust me people I'm very very skeptical but from this point on their @ss is on the line... Stay tuned..

BBRSpeedWorks · 08-20-2014, 09:10 PM

Good luck cosmo

Rusty · 08-20-2014, 09:59 PM

After this. I wouldn't blame you for wanting to chew on the end of a gun barrel.

But please don't!

Nixlimited · 08-20-2014, 10:20 PM

Good luck man! I think 2015 is going to be your and my year for the Z.

COSMO · 08-20-2014, 10:31 PM

I hope your right my friend...

Quote:

Originally Posted by Nixlimited

Good luck man! I think 2015 is going to be your and my year for the Z.

esfourteen · 08-21-2014, 11:03 AM

if it makes you feel any better, I just destroyed my bearings (knock) in my built block

Z&I · 08-21-2014, 11:25 AM

Quote:

Originally Posted by esfourteen

if it makes you feel any better, I just destroyed my bearings (knock) in my built block

How did that happen ???

COSMO · 08-21-2014, 11:52 AM

Sorry to hear that. Did you buy bad gas somewhere or what? I can tell you when I get mine back I will not be running mine when the heat index is 110 degrees....

Quote:

Originally Posted by esfourteen

if it makes you feel any better, I just destroyed my bearings (knock) in my built block

COSMO · 08-21-2014, 12:16 PM

To be honest I starting to think I should have just stayed stock..

Neo187H · 08-21-2014, 12:43 PM

Quote:

Originally Posted by COSMO

To be honest I starting to think I should have just stayed stock..

I was feeling the same way when my Stillen build started to run way over what I had planned as far as time and money but it was well worth it when it was done, then felt that way AGAIN when I blew my motor due to my own idiocy.

But now going back together with a new built block it's so well worth it again, you'll get that feeling back once you get over the humps.

Z&I · 08-21-2014, 01:27 PM

Quote:

Originally Posted by Neo187H

I was feeling the same way when my Stillen build started to run way over what I had planned as far as time and money but it was well worth it when it was done, then felt that way AGAIN when I blew my motor due to my own idiocy.

But now going back together with a new built block it's so well worth it again, you'll get that feeling back once you get over the humps.

I'm in the same situation as you are ... I'm on "Build (Again) #2" - but this time starting off with a built motor...
Got pretty bummed when the motor blew after the 1st build, trying to eek out more performance from the Stillen kit.

The Stillen kit worked pretty good until I got that itchin' for more speed at the track.

I'm working on putting up a thread/post detailing the trials and tribulations I've had to face and overcome along the way.
It is kind of funny in a way tho'

08-19-2014, 05:51 PM	#948 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Damn sorry to hear your troubles Cosmo. Kinda sucks to read VSR has another 2 complaints in this thread. Was considering getting a tune from them. COSMO likes this.

08-20-2014, 09:03 PM	#950 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Vsr is going to have the car picked up this sat morning and they are supposed to install a rear main seal and break in the new motor they built, install the 1000cc injectors then tune it. Trust me people I'm very very skeptical but from this point on their @ss is on the line... Stay tuned.. fuct and MidnightBlueZ like this.

08-20-2014, 09:59 PM	#952 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,181 Drives: 2011 Nismo GM 6M Rep Power: 2684437	After this. I wouldn't blame you for wanting to chew on the end of a gun barrel. But please don't! __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-20-2014, 10:20 PM	#953 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	Good luck man! I think 2015 is going to be your and my year for the Z. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

08-21-2014, 11:03 AM	#955 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	if it makes you feel any better, I just destroyed my bearings (knock) in my built block __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

08-19-2014, 05:05 PM	#946 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Still no word from the transport company.. The saga continues...

08-19-2014, 05:15 PM	#947 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	i changed mine right be for i started my turbo build I just dropped the tranny and put the new one in with a socket and hammer...took about 2 hours for the job thats tranny out and back in....good luck hope everthing works out

08-19-2014, 06:52 PM	#949 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I learned when it rains it pours but I'm going to give vsr a chance to correct this and get me up and running.. Being self employed it actually cost me to take time and days at a time to work on my car...

08-20-2014, 09:10 PM	#951 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Good luck cosmo

08-21-2014, 12:16 PM	#958 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	To be honest I starting to think I should have just stayed stock.. Infidel and MidnightBlueZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM