Blown Motor, Engine Rebuild/Replacement.

COSMO · 04-21-2014, 04:55 PM

Ok so today I managed to get the oil pan drilled and tapped and the oil pan back on. Also the gtm oil sending unit connected to the new motor.. Tomorrow I will drill and tap the motor for the gtm exhaust manifolds...

N0SL3N · 04-21-2014, 06:25 PM

Why are you not using an oil pan spacer or greddy oil pan? I thought most turbo guys wanted to increase oil capacity.

COSMO · 04-21-2014, 07:51 PM

Actually the oil cooler depending on what size adds about a quart. I'm not crazy about how the oil pan spacer makes the oil pan the lowest point on the front of the car...

NeoNz · 04-22-2014, 11:23 AM

good luck sir. how are things coming along? can't wait to see the finished product.

COSMO · 04-22-2014, 01:41 PM

Coming along pretty well and thanks for asking. I need to order another setab 34 row core since I already have the lines and sandwich. plate.

Quote:

Originally Posted by NeoNz

good luck sir. how are things coming along? can't wait to see the finished product.

COSMO · 04-22-2014, 05:51 PM

Today I managed to get the intake torqued down and the fuel rails and injectors on. Also managed to get the new z1 motor mounts on and the drivers side exhaust manifold.

jwick · 04-22-2014, 05:59 PM

What are your power level goals? This being a built motor I figured you were going big. Then I see that you are staying with the stock fuel rail.

COSMO · 04-22-2014, 06:36 PM

Oh come on man lets not get into the fuel rail debate... lol Again I have already spoken with Charles and bobby at vsr and my stock rails will be fine with my aeromotive 340 and my 750cc or 1050cc injectors. My power goals should be in the low to mid 600whp with my gtm stage II turbo's. I don't want crazy power because one it is not usable and two I want it to be Reliable...

jwick · 04-22-2014, 06:42 PM

Quote:

Originally Posted by COSMO

Oh come on man lets not get into the fuel rail debate... lol Again I have already spoken with Charles and bobby at vsr and my stock rails will be fine with my aeromotive 340 and my 750cc or 1050cc injectors. My power goals should be in the low to mid 600whp with my gtm stage II turbo's. I don't want crazy power because one it is not usable and two I want it to be Reliable...

Just a question man...You will basically have the same fuel setup as I do if you go with 750s. If that's good enough for 600-650whp then I would be able to cross something off the big power build list. I'll be interested to see how it turns out.

elperuano · 04-22-2014, 07:21 PM

I believe 2 or 3 others have this kit with built motors. None made over 600. The only one I know that made over 600 with built block ran e85. I don't think you'll be limited by fuel but rather your turbo kit. SSqueeze with his stage 3 kit made the numbers you're looking for.

Good luck buddy!

COSMO · 04-23-2014, 05:02 PM

Today I got all of the pulleys put on, a/c compressor, motor drilled and tapped and exhaust manifolds on. After reading Esfourteen's build thread his shop found a way to tap into the motor block on the drivers side and from there feeding both turbo's but after calling them they have decided to not share the part number. It may take some time but I Will find this part and post up a part number to all that have the same kit so you have the option of cooling the turbo's better than the way gtm designed it. Yes I offered to pay for the part but like I said I will share it when I find it...

COSMO · 04-23-2014, 05:04 PM

Thanks again esfourteen for trying to share this with the community....

elperuano · 04-23-2014, 05:48 PM

Solid! Good stuff hope u can get the part number asap!

COSMO · 04-23-2014, 05:56 PM

Actually after looking at the motor there are 2 ports that can be used on each side. More to come soon...

MidnightBlueZ · 04-23-2014, 07:19 PM

Coming right along!

04-21-2014, 06:25 PM	#782 (permalink)
N0SL3N Enthusiast Member Join Date: Dec 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 34	Why are you not using an oil pan spacer or greddy oil pan? I thought most turbo guys wanted to increase oil capacity. __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

04-22-2014, 11:23 AM	#784 (permalink)
NeoNz Base Member Join Date: Apr 2014 Location: Edison, NJ Posts: 22 Drives: 08 Vette LS3,12 G37x Rep Power: 11	good luck sir. how are things coming along? can't wait to see the finished product. __________________ 2012 G37x, K&N Intake, FI RHFC, 13.9 @ 100(Daily) 2008 Corvette LS3, B&B Exhaust, 12.3 @ 116

04-22-2014, 05:59 PM	#787 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	What are your power level goals? This being a built motor I figured you were going big. Then I see that you are staying with the stock fuel rail. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-22-2014, 06:36 PM	#788 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Oh come on man lets not get into the fuel rail debate... lol Again I have already spoken with Charles and bobby at vsr and my stock rails will be fine with my aeromotive 340 and my 750cc or 1050cc injectors. My power goals should be in the low to mid 600whp with my gtm stage II turbo's. I don't want crazy power because one it is not usable and two I want it to be Reliable... fuct and MidnightBlueZ like this.

04-23-2014, 05:02 PM	#791 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Today I got all of the pulleys put on, a/c compressor, motor drilled and tapped and exhaust manifolds on. After reading Esfourteen's build thread his shop found a way to tap into the motor block on the drivers side and from there feeding both turbo's but after calling them they have decided to not share the part number. It may take some time but I Will find this part and post up a part number to all that have the same kit so you have the option of cooling the turbo's better than the way gtm designed it. Yes I offered to pay for the part but like I said I will share it when I find it... fuct, elperuano and MidnightBlueZ like this.

04-21-2014, 07:51 PM	#783 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Actually the oil cooler depending on what size adds about a quart. I'm not crazy about how the oil pan spacer makes the oil pan the lowest point on the front of the car...

04-22-2014, 07:21 PM	#790 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	I believe 2 or 3 others have this kit with built motors. None made over 600. The only one I know that made over 600 with built block ran e85. I don't think you'll be limited by fuel but rather your turbo kit. SSqueeze with his stage 3 kit made the numbers you're looking for. Good luck buddy!

04-23-2014, 05:48 PM	#793 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Solid! Good stuff hope u can get the part number asap!

04-23-2014, 05:56 PM	#794 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Actually after looking at the motor there are 2 ports that can be used on each side. More to come soon... Mr.Squeeze likes this.

04-23-2014, 07:19 PM	#795 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 16	Coming right along!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM