Blown Motor, Engine Rebuild/Replacement.

Ron · 02-28-2014, 06:19 PM

We need a car with a GTM kit and an owner willing to lend it to some company so that we can get brand new custom manifolds that fit the kit. Easier said than done though lol..

DIGItonium · 02-28-2014, 08:29 PM

Quote:

Originally Posted by G37sHKS

I don't think coating the manifold will stop the crack

Rusty · 02-28-2014, 08:33 PM

Quote:

Originally Posted by cosmogirl

Would love to but gtm is no way going to admit their manifolds are garbage and help in any way to fix the crap they made... Rusty what are your thoughts on the cryo treatment. The way I see it I don't see how it would hurt anything..

My thoughts on cryo treatment. On high impact parts like ring and pinions, gears. No problem. Brake rotors, the jury is still out because of the heating cycle. On something like an exhaust manifold for a turbo car. Think it might be a waste of money because of the heat cycles that it goes through. From ambient temperature to something like over 1,200 deg. (If it glows red, it's that hot) Everytime you start your car and hammer on it. It will go through that cycle. Need something like a slow warm up, and a slow cool down. Think a blanket around around the manifold will help with keeping it stable.

Rusty · 02-28-2014, 08:37 PM

Quote:

Originally Posted by G37sHKS

I don't think coating the manifold will stop the crack

Coating the manifold inside and out before it cracks should help with the heat. But if you coat it after the crack starts. Thats a waste of money.

COSMO · 02-28-2014, 09:02 PM

You do know the cryo treatment is not a coating right? Cryo treating is supposed to make the material 50-60% stronger regardless of heat cycles. When my car was running my logs never went above 1100F on the EGT.

G37sHKS · 02-28-2014, 09:15 PM

Mike@GTM him self told me coating will not protect the manifold from cracking.

COSMO · 02-28-2014, 09:29 PM

Mike, hahahahahaha....

Quote:

Originally Posted by G37sHKS

Mike@GTM him self told me coating will not protect the manifold from cracking.

09nismo498 · 02-28-2014, 09:30 PM

does he even work there anymore?

COSMO · 02-28-2014, 09:35 PM

Now that wouldn't surprise me since they only seem to have very few working there. I heard sam just had brain surgery along with his other illnesses....

Quote:

Originally Posted by 09nismo498

does he even work there anymore?

Rusty · 02-28-2014, 09:54 PM

Quote:

Originally Posted by cosmogirl

You do know the cryo treatment is not a coating right? Cryo treating is supposed to make the material 50-60% stronger regardless of heat cycles. When my car was running my logs never went above 1100F on the EGT.

Yeah, it's freezing the **** out of it. LOL Lower the temp down to around -300F to stabilize the molecular structure. It's used to remove residual stresses, and improve wear resistance. The company I used to work for did it for awhile. Wasn't a money maker for them. We also did plasma spray coating for thermo parts. I feel comfortable with it on ring and pinions and gears. But for manifolds, I don't know. 1100F is still hot. It's glowing.

COSMO · 03-01-2014, 08:58 PM

Hey if you guys want to see more pics of my motor build go here:

https://www.facebook.com/sandrperformanceFL

Dzel · 03-01-2014, 09:03 PM

NICE!

Sent with TapAhoe

COSMO · 03-01-2014, 09:05 PM

My short block is finished..

COSMO · 03-01-2014, 09:08 PM

A better pic before assembly ..

elperuano · 03-01-2014, 09:14 PM

Congrats man! Now time for serious powwaaa

02-28-2014, 06:19 PM	#466 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	We need a car with a GTM kit and an owner willing to lend it to some company so that we can get brand new custom manifolds that fit the kit. Easier said than done though lol.. O&G and elperuano like this. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ] Last edited by Ron; 02-28-2014 at 06:23 PM.

02-28-2014, 09:15 PM	#471 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Mike@GTM him self told me coating will not protect the manifold from cracking. __________________ G37 BUILD UNDER CONSTRUCTION

02-28-2014, 09:30 PM	#473 (permalink)
09nismo498 Base Member Join Date: Sep 2010 Location: Chicago burbs Posts: 207 Drives: 14 GTR Rep Power: 16	does he even work there anymore? __________________ 2013 370z Nismo Turbo 2017 Lexus IS200T F Sport (DD)

03-01-2014, 08:58 PM	#476 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Hey if you guys want to see more pics of my motor build go here: https://www.facebook.com/sandrperformanceFL DIGItonium and elperuano like this.

03-01-2014, 09:03 PM	#477 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	NICE! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-28-2014, 09:02 PM	#470 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	You do know the cryo treatment is not a coating right? Cryo treating is supposed to make the material 50-60% stronger regardless of heat cycles. When my car was running my logs never went above 1100F on the EGT.

03-01-2014, 09:14 PM	#480 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Congrats man! Now time for serious powwaaa Mr.Squeeze and COSMO like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM