Blown Motor, Engine Rebuild/Replacement.

blackonorange · 02-18-2014, 05:25 PM

Uhhh you're reading Sasha completely the wrong way

Boosted Performance · 02-18-2014, 05:40 PM

Quote:

Originally Posted by cosmogirl

Come on man why the hijack?

I know vsr is a competitor but really... uncool brotha.

Quote:

Originally Posted by cosmogirl

I know but it's obvious the question was asked as an attempt to second guess my faith in my builder. Sasha why don't you just call bobby and find out yourself and report back if meets your standards because Im sure we are all dying to know.

I am sorry if you took it that way. That was not my intent at all....and I was just wondering. I do not build engines, so I don't see how this is competition in any way....They have a single turbo kit, and so do I...they are very different, and the customer can decide what best suites their needs/applications. I have also never had any issues with them, so there is no reason for me to try and "dig" for something that isn't there. I wish you all the best with your build.

Again, I am sorry, but that was not my intent at all.

COSMO · 02-18-2014, 08:51 PM

It's all good, and hey allow me to apologize misinterpreting your comment. Maybe one day they will legalize marijuana in FL and I will chillax all of the time...

Dzel · 02-18-2014, 09:43 PM

Love being in an adult lobby

Sent with TapAhoe

COSMO · 02-18-2014, 10:05 PM

I'm having Boost withdrawals. My built motor should ship in a few days btw.

COSMO · 02-21-2014, 10:02 AM

Just a few pics of the motor and internals going in the cryo machine.

Chuck33079 · 02-21-2014, 10:04 AM

So is the motor the last thing you're waiting on?

COSMO · 02-21-2014, 10:18 AM

Yeah all of the parts are there so after the cryo treatment they then will begin the build since the bore has already been done. Keep your fingers crossed I won't have any issues because this will be my last build.

Chuck33079 · 02-21-2014, 10:19 AM

I'm pulling for you.

The break in miles are going to suck. Do you have a new base map for the new fuel system so you can get it back on the road and broken in?

COSMO · 02-21-2014, 10:22 AM

The only thing I have is the base gtm base for now. When the motor is finished they will ship it to me then I will install the turbo kit and transport it down there for a tune.

Chuck33079 · 02-21-2014, 10:32 AM

Quote:

Originally Posted by cosmogirl

The only thing I have is the base gtm base for now. When the motor is finished they will ship it to me then I will install the turbo kit and transport it down there for a tune.

So you're goint to transport it out, get the base map and go back later for the full boost tune? Or are you just going to have them do an abbreviated break in on the dyno?

COSMO · 02-21-2014, 12:12 PM

I'm going to haul it down there myself because I just don't trust these transport companies and then have them just do a break in on the dyno... I will start the car here and allow it to run for about 30 min and then do a oil change. Yes I'm going to use non-synthetic oil for the break-in.

COSMO · 02-21-2014, 12:17 PM

A few more pics..

Boosted Performance · 02-21-2014, 12:22 PM

Quote:

Originally Posted by cosmogirl

I will start the car here and allow it to run for about 30 min and then do a oil change. Yes I'm going to use non-synthetic oil for the break-in.

Just make sure to follow the engine builders break-in procedure and use the oil they tell you to use. The oil they tell you to use will depend on those clearances on the journals, and of course the builder will know them. I would suspect it would be a heavier weight oil like 5W40 because the engines built for higher power should be "looser".

I use 0W40 M1 synthetic on my own stock block 350Z because it has shown to greatly reduce bearing ware (Blackstone oil analysis results)

There are also oils designed for engine break-ins....something to ask about unless it has already been brought up.

COSMO · 02-21-2014, 12:23 PM

Right on, yeah bobby told me just to use the Nissan oil and then later on I can switch to motul..

Quote:

Originally Posted by Boosted Performance

Just make sure to follow the engine builders break-in procedure and use the oil they tell you to use. The oil they tell you to use will depend on those clearances on the journals, and of course the builder will know them.

There are oil designed for engine break-ins....something to ask about unless it has already been brought up.

02-18-2014, 05:25 PM	#346 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	Uhhh you're reading Sasha completely the wrong way Nixlimited, O&G and GaleForce like this.

02-18-2014, 08:51 PM	#348 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	It's all good, and hey allow me to apologize misinterpreting your comment. Maybe one day they will legalize marijuana in FL and I will chillax all of the time... fuct, Boosted Performance, jwick and 1 others like this.

02-18-2014, 09:43 PM	#349 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Love being in an adult lobby Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-21-2014, 10:04 AM	#352 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	So is the motor the last thing you're waiting on? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-21-2014, 10:19 AM	#354 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	I'm pulling for you. The break in miles are going to suck. Do you have a new base map for the new fuel system so you can get it back on the road and broken in? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-18-2014, 10:05 PM	#350 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I'm having Boost withdrawals. My built motor should ship in a few days btw.

02-21-2014, 10:18 AM	#353 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Yeah all of the parts are there so after the cryo treatment they then will begin the build since the bore has already been done. Keep your fingers crossed I won't have any issues because this will be my last build.

02-21-2014, 10:22 AM	#355 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	The only thing I have is the base gtm base for now. When the motor is finished they will ship it to me then I will install the turbo kit and transport it down there for a tune.

02-21-2014, 12:12 PM	#357 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I'm going to haul it down there myself because I just don't trust these transport companies and then have them just do a break in on the dyno... I will start the car here and allow it to run for about 30 min and then do a oil change. Yes I'm going to use non-synthetic oil for the break-in.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM