Blown Motor, Engine Rebuild/Replacement.

COSMO · 11-27-2013, 02:58 PM

You had me at Pistons!!!!!

COSMO · 11-27-2013, 03:30 PM

Just got off the phone with bobby at S&r and he talked to the guys at CP. They told him they could make me the pistons 10.1 for $1000 and if more were interested that it would be less money. Phunk I am not trying to step on your toes here but trying to get me motor up asap. He is supposed to be calling me back since I told him 3 others were interested on a price for 4 of us.

esfourteen · 11-27-2013, 03:39 PM

my set of wiseco 10:1 cost about 650 through Z1, but I did warn you s&r's build price sounded high. these are also the guys who told you that 10:1 "didn't exist"

phunk · 11-27-2013, 03:43 PM

Quote:

Originally Posted by cosmogirl

Just got off the phone with bobby at S&r and he talked to the guys at CP. They told him they could make me the pistons 10.1 for $1000 and if more were interested that it would be less money. Phunk I am not trying to step on your toes here but trying to get me motor up asap. He is supposed to be calling me back since I told him 3 others were interested on a price for 4 of us.

Ya sounds messy, I would just let me handle it... its only going to get confusing having 2 group buys for the same exact part.

COSMO · 11-27-2013, 04:11 PM

Quote:

Originally Posted by phunk

Ya sounds messy, I would just let me handle it... its only going to get confusing having 2 group buys for the same exact part.

That's fine with me. I will just have him hold off on the build and have you ship my pistons to s&r? Besides it is cheaper and every little bit helps.. Thanks again phunk. Can send the money anytime, just shoot me your pp address.

Cheers to all and hope everyone has a Great Thanksgiving,

Harry

phunk · 11-27-2013, 04:18 PM

cosmo I just updated the GB thread... pricing has unfortunately changed. Its still less than your quote, but sucks, I really liked the last price. If I get the order in next week, they said it will take 4-5 weeks to make the pistons. So lets see if everyone else is still on board, and if so I can place the order.

hollywood6973 · 11-27-2013, 04:18 PM

esforteen Whats a ball
park cost to build a motor like that?

COSMO · 11-27-2013, 10:14 PM

What was the wait time on the wiseco 10:1 pistons because I may go that route if I can get them right away. If the wait time is the same as cp I will go with cp..

Quote:

Originally Posted by esfourteen

my set of wiseco 10:1 cost about 650 through Z1, but I did warn you s&r's build price sounded high. these are also the guys who told you that 10:1 "didn't exist"

esfourteen · 11-28-2013, 12:25 AM

Quote:

Originally Posted by cosmogirl

What was the wait time on the wiseco 10:1 pistons because I may go that route if I can get them right away. If the wait time is the same as cp I will go with cp..

4-6 weeks, something along those lines

COSMO · 12-04-2013, 10:13 AM

Should have some updates today...

COSMO · 12-04-2013, 03:23 PM

Alright as of today I ordered a long block from VSR out of tampa with custom 10.1 CP pistons, ARP Head Studs (85ft lbs) and a cryogenic treatment of most everything. Have to wait 4 weeks on the pistons and roughly another 2 weeks for the build. Also need a DW65A fuel pump since the one that gtm provides (walbro 255)is only good for around 5oowhp and also need some 1000cc injectors. The 255 may actually work with the larger injectors but why chance it..

Chuck33079 · 12-04-2013, 03:38 PM

Quote:

Originally Posted by cosmogirl

Alright as of today I ordered a long block from VSR out of tampa with custom 10.1 CP pistons, ARP Head Studs (85ft lbs) and a cryogenic treatment of most everything. Have to wait 4 weeks on the pistons and roughly another 2 weeks for the build. Also need a DW65A fuel pump since the one that gtm provides (walbro 255)is only good for around 5oowhp and also need some 1000cc injectors. The 255 may actually work with the larger injectors but why chance it..

What kind of rods? Did you get the coatings on the pistons?

Good call on the fuel pump, it's too cheap to not do.

COSMO · 12-04-2013, 04:07 PM

K1 rods... They said the pistons didn't need it because of the material. Those cp pistons are supposed to be bad to the bone...

Quote:

Originally Posted by Chuck33079

What kind of rods? Did you get the coatings on the pistons?

Good call on the fuel pump, it's too cheap to not do.

Chuck33079 · 12-04-2013, 04:08 PM

Quote:

Originally Posted by cosmogirl

K1 rods... They said the pistons didn't need it because of the material. Those cp pistons are supposed to be bad to the bone...

Wierd. Who said that? CP or the shop? CP offers the coatings if they're the same pistons as the ones phunk is having made.

COSMO · 12-04-2013, 04:13 PM

Your right I was taking about the cryo treatment..

11-27-2013, 03:39 PM	#33 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	my set of wiseco 10:1 cost about 650 through Z1, but I did warn you s&r's build price sounded high. these are also the guys who told you that 10:1 "didn't exist" Mkai0, blackonorange, elperuano and 1 others like this. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

11-27-2013, 04:18 PM	#36 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	cosmo I just updated the GB thread... pricing has unfortunately changed. Its still less than your quote, but sucks, I really liked the last price. If I get the order in next week, they said it will take 4-5 weeks to make the pistons. So lets see if everyone else is still on board, and if so I can place the order. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

12-04-2013, 03:23 PM	#41 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Alright as of today I ordered a long block from VSR out of tampa with custom 10.1 CP pistons, ARP Head Studs (85ft lbs) and a cryogenic treatment of most everything. Have to wait 4 weeks on the pistons and roughly another 2 weeks for the build. Also need a DW65A fuel pump since the one that gtm provides (walbro 255)is only good for around 5oowhp and also need some 1000cc injectors. The 255 may actually work with the larger injectors but why chance it.. tibal and fuct like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 09:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 06:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-03-2012 12:29 AM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 12:28 PM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 11:01 AM

11-27-2013, 02:58 PM	#31 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	You had me at Pistons!!!!!

11-27-2013, 03:30 PM	#32 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Just got off the phone with bobby at S&r and he talked to the guys at CP. They told him they could make me the pistons 10.1 for $1000 and if more were interested that it would be less money. Phunk I am not trying to step on your toes here but trying to get me motor up asap. He is supposed to be calling me back since I told him 3 others were interested on a price for 4 of us.

11-27-2013, 04:18 PM	#37 (permalink)
hollywood6973 Base Member Join Date: Mar 2013 Location: pittsburgh Posts: 14 Drives: 2013z sport touring Rep Power: 12	esforteen Whats a ball park cost to build a motor like that?

12-04-2013, 10:13 AM	#40 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Should have some updates today...

12-04-2013, 04:13 PM	#45 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Your right I was taking about the cryo treatment..