Nissan 370Z Forum
Page 33 of 103 « First 233132 33 34354383 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Blown Motor, Engine Rebuild/Replacement. (http://www.the370z.com/forced-induction/82635-blown-motor-engine-rebuild-replacement.html)

COSMO 03-01-2014 08:16 PM
1 Attachment(s)
Forgot one..:excited::excited:

COSMO 03-01-2014 08:32 PM
Next should be the heads mated to the short block. Time for the L19 Head Studs!!!

O&G 03-01-2014 09:07 PM
Quote:
Originally Posted by cosmogirl (Post 2715233)
Next should be the heads mated to the short block. Time for the L19 Head Studs!!!
Can't go wrong with the L19s top notch. Good sh*t man!

sent from my Samsung Galaxy Note

SRperformance 03-03-2014 01:43 PM
Quote:
Originally Posted by Rusty (Post 2714024)
Yeah, it's freezing the **** out of it. LOL Lower the temp down to around -300F to stabilize the molecular structure. It's used to remove residual stresses, and improve wear resistance. The company I used to work for did it for awhile. Wasn't a money maker for them. We also did plasma spray coating for thermo parts. I feel comfortable with it on ring and pinions and gears. But for manifolds, I don't know. 1100F is still hot. It's glowing.
We do several manifolds including Greddy. You have to understand manufactures don't dig them and sell them. We have to force the metal into shape therefore creating a mountain of stress. Or send me a manifold and I can jig it up and make a better one.

Ron 03-03-2014 03:08 PM
There we go! Who with cracked manifolds that already replaced them wants to send the set to VSR so they can make a new one? I would but mine won't be off the car in a while.

elperuano 03-03-2014 03:20 PM
I'll know shortly. Waitin on my pistons and rods :)

faceglide 03-03-2014 03:46 PM
Quote:
Originally Posted by SRperformance (Post 2717473)
We do several manifolds including Greddy. You have to understand manufactures don't dig them and sell them. We have to force the metal into shape therefore creating a mountain of stress. Or send me a manifold and I can jig it up and make a better one.
Damn, willing to pick up the pieces of another company's failure. Instead of pushing their own kit, they offer to fix yours. Big respect to you guys, putting the enthusiast first.:tup:

COSMO 03-03-2014 03:51 PM
What are you ordering the parts and having someone do the build for you? Don't hold out on us now what are you going with and who are you considering doing your build????



Quote:
Originally Posted by elperuano (Post 2717625)
I'll know shortly. Waitin on my pistons and rods :)

elperuano 03-03-2014 04:02 PM
Lol I'm not holding out broskis. I've said in other threads I'm going built and have spoken with u about it.
I jumped on the group buy for pistons and rods with Charles that didn't turn out to be a group buy but I went thru with it anyways. Might have someone local build the block.

Rusty 03-03-2014 04:44 PM
Quote:
Originally Posted by SRperformance (Post 2717473)
We do several manifolds including Greddy. You have to understand manufactures don't dig them and sell them. We have to force the metal into shape therefore creating a mountain of stress. Or send me a manifold and I can jig it up and make a better one.
I understand where you are coming from. ;) I've worked with castings and forging for along time. Know all about the stuff. :facepalm:

COSMO 03-03-2014 06:15 PM
I'm planning on sending my exhaust manifolds down there so I will be the guinea pig...

G37sHKS 03-03-2014 08:20 PM
Group buy for manifold? :D

Ron 03-03-2014 08:52 PM
Yes!

elperuano 03-03-2014 09:17 PM
I'm in!

Rusty 03-03-2014 11:23 PM
Quote:
Originally Posted by cosmogirl (Post 2717823)
I'm planning on sending my exhaust manifolds down there so I will be the guinea pig...
Glad you are doing this. It will give me a better idea on how the cyro will handle the high temps. ;)


All times are GMT -5. The time now is 03:52 PM.
Page 33 of 103 « First 233132 33 34354383 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2