Why I thought bushing from whiteline were yellow? lol
|
|
LinkBack | Thread Tools | Display Modes |
02-10-2014, 05:28 PM | #318 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
The set I got were also black. [shrugs]
Man I'm long overdue for a cleaning haha. Almost 60k miles now, and the kit was installed at 22k miles.
__________________
|
02-10-2014, 07:15 PM | #320 (permalink) | |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,171
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Quote:
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
02-10-2014, 07:19 PM | #321 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Strangeland
Posts: 1,054
Drives: 09 370z
Rep Power: 73 |
Thats what I was thinking. You would think if it was a piece of rod, it would have to get past the piston. If it did that its a lot worse than just the rod lol. Im thinking broken ring lands.
__________________
2009 370z touring w/sports package |
02-10-2014, 07:36 PM | #323 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,171
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Hopefully, the only damage done was to the piston lands, and not to the cylinder walls or anything else.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
02-10-2014, 07:38 PM | #324 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,171
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
If it was a rod. Chances are, it would be out of the side of the block. Be real easy to see then.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
02-10-2014, 07:48 PM | #325 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,171
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Years ago. I worked on a ferd 300ci straight 6. The guy said it was down on power, but had no strange noises in it. When I removed the head. I had two pistons at top dead center. Turned the crank over by hand, and watched all of the pistons move, but #6. Removed the oil pan and everything looked good. Unbolted the rod cap from #6 and pushed the piston and rod up. What happen was the piston broke in two at the oil ring land. No damage to the cylinder wall. Got another piston and new rings and install it.
Hopefully your motor could be like this.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
02-10-2014, 10:53 PM | #327 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,171
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Any oil around the hole? 'cause this doesn't sound good.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
02-10-2014, 11:39 PM | #328 (permalink) |
A True Z Fanatic
Join Date: Dec 2009
Location: 03350 Australia
Posts: 1,514
Drives: 09 Nissan 370Z M6
Rep Power: 39973 |
Ah, it is actually an electrical problem - engine won;t start right ??
Rod came out the side of the block and knocked the wire off the starter solenoid, so is actually an electrical problem !!! D'oh ......... |
02-11-2014, 10:22 AM | #329 (permalink) |
A True Z Fanatic
Join Date: Dec 2012
Location: FL
Posts: 1,816
Drives: 2012 Touring GTM TT
Rep Power: 19 |
Well it doesn't look like I am going to be able to pull the motor today due to the weather. Yes the cars Always stays in the garage but I will have to roll it out a little to get the motor out with the tranny attached.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blown motor!!!! | COSMO | Forced Induction | 166 | 11-25-2013 09:33 PM |
Someone in the DFW area who can rebuild a 370z motor | Denny McLain | Engine & Drivetrain | 16 | 01-29-2013 06:27 PM |
370z engine blown | Fabsnoop | Nissan 370Z General Discussions | 53 | 06-03-2012 12:29 AM |
WORST DAY!!!! Possible engine blown???!!!! | Westwood | Engine & Drivetrain | 189 | 04-09-2012 12:28 PM |
vq37vhr ( 370z motor ) NOT BLOWN | soaka1 | Wanted | 0 | 03-10-2010 11:01 AM |