Best OBD system for FI....?

Sh0velMan

IIRC, our ECU doesn't pass boost/vac to the OBD bus, it has a very rough Manifold pressure sensor that is really there to detect massive leaks, not for accurate vacuum/boost readings.

Not all of the traces and gauges in the Dash Command screens are supported on all cars. 'swhy you have to make a custom layout if you don't want to see them, which I don't think is supposed on the iOS or Android versions.

I have it for PC and I know I can import layouts..

__________________
Buy My Car! | Build Thread

TopgunZ

So if you have it for PC..do you have a laptop under your seat or something? Or are you saying you can use the Ipad for that?

Sh0velMan

Tablet PC.

__________________
Buy My Car! | Build Thread

theDreamer

That looks similar, the program, to what Ron uses in Houston for his TT setup.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Sh0velMan

It's exactly the same, so far as I know, since it was him that I found out about the software from hehe.

__________________
Buy My Car! | Build Thread

theDreamer

That would explain it then.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Chuck33079

Do you have a larger picture? I can't quite make out any details.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

TopgunZ

So are you able to read AFR's and oil/fuel pressure on that? I see the Intake and boost.

SouthArk370Z

If the software is configurable, you _should_ be able to read any item that has a Mode/PID. There is no oil pressure sensor on the Z. IIRC, MAP is not directly available but may accessible if you know where to look. See the link in my sig for some OBD/CAN info I've collected.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

jperez84

I have a Camp II left over from when I parted out my car. Here's the link to the car. Gtm 370z twin turbo transformation 548rwhp 486rwtq @ 11 psi

Message me if you're interested.

snowsurfdirtx

i bought the Aeroforce interceptor with oil pressure and wideband o2 analog inputs(it accepts 2 analog inputs) and the gauge is OBD2. I'll run a separate defi red racer for boost. once i get it all installed i'll post pics and a review, but I went with this for the least amount of clutter and keep the stock look as much as possible. Just need to order a gauge cup for the interceptor

__________________
11 Red Touring/Sport/Nav, 472/382wtq@7psi.. GTM/Tomei/Volk/Motordyne/Z1/JLAudio/Aeroforce/etc..
95 S14 in progress, L33 v8.. T7575 turbo/SPL/MCA Suspension/Personal/Works Bell/OZ/etc..

TopgunZ

I have opted for the Visio tablet paired by the Bluetooth obd sender. Using this and the dashcommand app I can read everything except oil pressure. Although I think I want my boost gauge to be standalone also so I am looking at ways to mount these 2 pods.

I was thinking about mounting them in-between and behind the 3 gauge cluster, in-between the current gauges. Not sure how the wiring will go through the dash as of yet though.

Anyone done this yet?

Meulen

I thought I saw a diy on replacing the clock with a boost guage somewhere???

Otherwise, those galeforce pillar guage pods are super clean!

__________________
Follow my build thread here: Meulens Build Journal