I was able to change my transfluid without removing anything. You just need to cut down the head of an allen key. They are cheap and will save you lots
|
|
LinkBack | Thread Tools | Display Modes |
10-02-2013, 06:15 PM | #31 (permalink) |
Enthusiast Member
Join Date: Jun 2010
Location: Edmonton AB
Posts: 416
Drives: 2010 PW 370z
Rep Power: 15 |
I was able to change my transfluid without removing anything. You just need to cut down the head of an allen key. They are cheap and will save you lots of time.
__________________
*Full Mod List* |
10-02-2013, 06:15 PM | #32 (permalink) | |
A True Z Fanatic
Join Date: Jan 2010
Location: Chicago
Posts: 1,449
Drives: A Garbage Truck
Rep Power: 21 |
Quote:
I will consider your suggestion and buy more filters. And picture of the exhaust that was done to connect it to the CNT exhaust. Last edited by Cell; 10-02-2013 at 06:17 PM. |
|
10-02-2013, 10:36 PM | #33 (permalink) |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
That exhaust worked out very well.
For those that don't know...I sent Cell the Y-pipe section without the 2-bolt flanges welded on, and the dual 2.5" side of the Y section longer so it was nice and quick for the exhasut shop to simply cut them down to size (length), and weld the two 2-bolt flanges on. Quick/simple/cheap.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
10-04-2013, 08:37 AM | #34 (permalink) |
A True Z Fanatic
Join Date: Feb 2009
Location: Texas
Posts: 30,879
Drives: 370z
Rep Power: 4210 |
Cell, once you go back for your retune, let me know so I can add you to the finished builds thread. If you want to give me your current numbers just to add you that is fine also.
Just need the following info: -Year -Kit used -Current HP/Torque -Current PSI -Miles since kit installed -Other upgrades (clutch/flywheel/engine/etc.), also include miles when these upgrades were completed with done after original FI install
__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram |
10-04-2013, 08:49 AM | #35 (permalink) | |
A True Z Fanatic
Join Date: Jul 2013
Location: Puerto Rico
Posts: 7,157
Drives: 13 Nissan 370Z SP M6
Rep Power: 7586 |
Quote:
|
|
10-04-2013, 08:53 AM | #36 (permalink) |
A True Z Fanatic
Join Date: Feb 2009
Location: Texas
Posts: 30,879
Drives: 370z
Rep Power: 4210 |
This is the finished builds: Forced Induction Finished Builds
BP Twin Scroll is adding many people to this list.
__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram |
10-04-2013, 09:36 AM | #37 (permalink) | |
A True Z Fanatic
Join Date: Jul 2013
Location: Puerto Rico
Posts: 7,157
Drives: 13 Nissan 370Z SP M6
Rep Power: 7586 |
Quote:
|
|
10-04-2013, 01:14 PM | #38 (permalink) | |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
Quote:
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
|
10-05-2013, 11:59 AM | #39 (permalink) | ||
A True Z Fanatic
Join Date: Jan 2010
Location: Chicago
Posts: 1,449
Drives: A Garbage Truck
Rep Power: 21 |
Quote:
Quote:
UPDATE on the driving experience: At IDLE, the engine revs up and down at about a 50-100 rpm range. It is noticeable with the exhaust note and the oil pressure jumping up and down. Not sure why it is doing this but I think it might just be the tune. Hopefully it can be fixed with a retune. Last night, while driving I noticed something odd. The engine oil was around 175 degrees but the oil pressure dropped to 25 psi which isn't normal. Maybe someone else has an explanation for this? This morning after driving it for 30 minutes, it is back to normal with 185 degree oil temp and 30 psi oil pressure. With the new clutch and flywheel, I have noticed that it is slightly harder to get into gear now. I either have to increase the RPM and engage it into 1st gear or rev it at a lower RPM and kind of release the clutch a bit quicker. If I don't engage it correctly, it feels like it will stall. This is with a 19lb flywheel. Another thing is that with the stock trans oil, I noticed that once it gets hot enough, it gets even a bit more harder to drive. I wonder how much more would the motul oil improve the engagement when it is heated up. One thing the tune did fix compared to stock was the IDLE dropping problem. I recorded the below video when the car had a stock tune. |
||
10-06-2013, 02:19 PM | #42 (permalink) |
A True Z Fanatic
Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865 |
I haven't noticed my tach moving like that during idle. Honestly I don't pay attention to it during idle, I listen to the car instead. My oil pressure is rock solid once the car is warm, higher at highway speeds 350kpa and lower 150kpa at idle (normal) . A/F fluctuates during idle (normal).
__________________
|
10-06-2013, 02:24 PM | #43 (permalink) | |
A True Z Fanatic
Join Date: Jan 2010
Location: Chicago
Posts: 1,449
Drives: A Garbage Truck
Rep Power: 21 |
Quote:
I hope a tune fixes this. Is it possible that I am still not running enough oil? The dip stick shows the oil level is about 2-3mm from the top dot and that is after the car is warmed up and driven. Thanks Last edited by Cell; 10-06-2013 at 02:33 PM. |
|
10-06-2013, 05:09 PM | #44 (permalink) |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
George, email me a 30 second log at idle and I will get it looked at.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boosted Performance single turbo build | Boosted Performance | Forced Induction | 1841 | 09-06-2016 12:17 PM |
Boosted Performance single turbo results | Boosted Performance | Forced Induction | 136 | 06-18-2014 06:40 PM |
Forged Performance: HKS GT800 Turbo Kit Install | ChadB@Forged | Member's 370Z Gallery | 7 | 05-17-2011 04:10 PM |
Good performance shop for turbo install in dfw? | Andyy | Forced Induction | 3 | 04-26-2011 11:27 PM |
NoGood Review | R2C Performance Intake Install | nogoodname | Intake/Exhaust | 114 | 08-29-2009 09:28 AM |