So I just had the Stillen supercharger installed a couple weeks ago. I did a 1500 mile road trip from South Carolina to Texas and everything was great. I've been
|
|
LinkBack | Thread Tools | Display Modes |
07-09-2013, 08:34 PM | #1 (permalink) |
Track Member
Join Date: Mar 2012
Location: San Antonio
Posts: 714
Drives: '09 370Z PW M6
Rep Power: 19 |
My Stillen blower blew up :(
So I just had the Stillen supercharger installed a couple weeks ago. I did a 1500 mile road trip from South Carolina to Texas and everything was great. I've been keeping an eye on the fluid making sure everything was good and making sure it was topped off and NOT overfilled.
Just this morning the supercharger whine seemed to be louder than normal, then this afternoon it got really loud and then grinding noises from hell! Sucky thing is that I'm kinda stuck in Texas for military training. Going to have to get the car trucked/shipped back to the Carolina's to get repaired I never heard of a Stillen Vortech supercharger doing this before. I pulled the dipstick and this is what I saw: Its usually a red/pink fluid right in the middle of the hash marks |
07-09-2013, 08:40 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Covington, GA
Age: 45
Posts: 14,844
Drives: Waiting on next Z
Rep Power: 221 |
I've seen this before in my 350Z days. Take more pics. Ensure there is no leaks from anywhere on the installation part. They should replace. It happens sometimes. As long as Stillen replaces I wouldn't worry. It looks dry as a bone. Something internal must of fail. Is there any fluid in the piping? Basing this on a perfect install.
__________________
Last edited by SPOHN; 07-09-2013 at 08:43 PM. |
07-09-2013, 08:52 PM | #3 (permalink) |
Track Member
Join Date: Mar 2012
Location: San Antonio
Posts: 714
Drives: '09 370Z PW M6
Rep Power: 19 |
Unfortunately I don't have any proper tools to be doing anything to the car and I'm too busy with military training to do anything about it. This wouldn't impact me so much if I wasn't half way across the country away from home, but stuff happens :P
|
07-10-2013, 06:51 AM | #4 (permalink) |
Enthusiast Member
Join Date: May 2012
Location: Greater Philly Area
Posts: 272
Drives: Mercedes C43 AMG
Rep Power: 13 |
If you haven't done so yet, give Stillen a ring. Assuming the kit was installed properly, they should give you a replacement blower.
__________________
F.I. TT Kit -- GT2860RS [500rwhp/449ft-lbs @ 9psi][/B][/I] CAR SOLD... |
07-10-2013, 06:56 AM | #5 (permalink) |
A True Z Fanatic
Join Date: Jan 2011
Location: St. Louis
Posts: 3,509
Drives: 09 370z
Rep Power: 25 |
sucks man
__________________
2009 Nissan 370z/2003 Honda Soccer Van Shineauto Amuse Body Kit/UAM Fenders/Bc Br Coilovers/Topspeed Exhaust/Racing Hart Wheels and More My Sexy Beast |
07-10-2013, 11:36 AM | #6 (permalink) |
Base Member
Join Date: Oct 2011
Location: NW Houston
Posts: 130
Drives: '08 350Z
Rep Power: 14 |
If you are close to Houston, contact JTran Studios. They do a lot of Stillen S/C installs, and communicate with Stillen regularly. Maybe they can fix you up and you can drive it home.
They would know better than me, but maybe you can pull the small rear belt off of the blower, then baby it to them to get a replacement blower.
__________________
Jtranbuilt '08 Z [Jtran PT7075 Single - Fujitsubo - Transgo - Wilwood - TE37SL - BC Racing] Last edited by Pro4Jackster; 07-10-2013 at 11:39 AM. |
07-10-2013, 05:22 PM | #7 (permalink) | |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306 |
Quote:
Please give me a call so we can get this sorted out for you right away. If you can also send me an email with some pictures of the entire top of the blower (not just the dipstick) that would be very helpful. My email address is kmillen@stillen.com and my phone number is 800-576-2131 ext. 173. Thank you very much! Kyle |
|
07-10-2013, 06:21 PM | #8 (permalink) |
Track Member
Join Date: Mar 2012
Location: San Antonio
Posts: 714
Drives: '09 370Z PW M6
Rep Power: 19 |
Thanks for posting up, Kyle. I tried calling you but got your voicemail, so I left my number. I'll try and get those pics you requested and shoot those out to you tomorrow.
|
07-10-2013, 07:10 PM | #9 (permalink) | |
A True Z Fanatic
Join Date: Feb 2013
Location: Sacramento, CA
Posts: 1,372
Drives: 40th Anniversary
Rep Power: 15 |
Quote:
Sent from my Palm Pilot circa 1997...
__________________
Are U in Sacramento or Central Valley California? Click here!
Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off |
|
07-10-2013, 08:20 PM | #11 (permalink) |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306 |
Just wanted to give an update for the forum:
Firedan and I touched bases by phone this afternoon and we were able to get some more info. Looks like this was actually a second hand kit. While the second installation was completed a week ago the original installation was performed on a G37 back in late 2010. The kit was removed from the G37 after an accident which left the car as a total loss. We've actually been working with Firedan for the last month or so to get him the necessary parts to convert the kit from a G to a Z. Along with the additional parts that were left in the G there are quite a few components that vary from the Z to the G kits. Fortunately Firedan has been able to identify a lot of the parts he did and/or didn't have. We will continue working with Firedan to get his car back on the road as quickly as possible. |
07-12-2013, 03:37 PM | #14 (permalink) |
Track Member
Join Date: Mar 2012
Location: San Antonio
Posts: 714
Drives: '09 370Z PW M6
Rep Power: 19 |
No this kit was bought a couple months ago offline with a local seller. Car is scheduled to get worked on next week. Taking all the Stillen stuff out and getting the VSR big single treatment
|
08-05-2013, 10:22 AM | #15 (permalink) |
Track Member
Join Date: Mar 2012
Location: San Antonio
Posts: 714
Drives: '09 370Z PW M6
Rep Power: 19 |
So I talked to VSR who pulled the Stillen supercharger off. They didn't see any external signs of damage; leaking fluid, etc,....so looking like something internal in the Vortech unit failed. They'll be handling the rebuild and re-selling the kit from their shop in Florida.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A/C Seat blower filters...... | BeachZTT | Nissan 370Z Roadster (Convertible) | 12 | 01-26-2023 10:11 PM |
2nd Problem with CNT HFCs --- blew out a hole | zforlife | Intake/Exhaust | 20 | 04-11-2013 09:56 PM |
Nissan blew it with me | Inspector71 | Other Vehicles | 57 | 10-19-2012 01:45 PM |
Stock speakers blew | Synack | Audio & Video | 20 | 05-12-2011 12:32 PM |
WTB: ATI Blower Fan | DIGItonium | Misc Items for sale (No Z stuff) | 6 | 12-29-2010 02:38 PM |