GTM TT K&N part number?

[Chuck33079]

I'm looking to get a spare set of filters so I don't have to wait around for the filters to dry after cleaning and re-oiling. Which filters do they use on their kits?

[wind.zero]

Originally Posted by Chuck33079

I'm looking to get a spare set of filters so I don't have to wait around for the filters to dry after cleaning and re-oiling. Which filters do they use on their kits?

I know some of the TT and SC kits share the same filter. I am on the Stage 1 SC kit.

I ordered 2 filters from GTM and they sent me two K&N RC-9350 filters which are universal fit 2.5" filters. This is GTM Part #GTM-030-3

They also show some 3" filters, GTM Part #GTM-030-30, that fit the TT and SC.

So I guess it depends if you have 2.5" or 3" inlet filters.

EDIT
I bought 2 spare filters and rotate clean/re-oiled ones every other oil change.

[Chuck33079]

That's diameter, correct? In that case I'd guess I've got the 3" filters.

[DEpointfive0]

You can call K&N, give them all the dimensions and they'll give you the part number

[Chuck33079]

I was trying to get that without pulling off the bumper and measuring. I'm just being lazy.

[Mr.Squeeze]

Originally Posted by Chuck33079

I was trying to get that without pulling off the bumper and measuring. I'm just being lazy.

I would like to know the part number as well.

[elperuano]

Same here.

[Chuck33079]

Just called GTM, whoever answered the phone didn't know the part numbers offhand but told me I could buy them from his website. Come on, man. I'd like to be able to shop around.

[Mike@GTM]

Originally Posted by Chuck33079

Just called GTM, whoever answered the phone didn't know the part numbers offhand but told me I could buy them from his website. Come on, man. I'd like to be able to shop around.

Hey Charles, I just talked to you on the phone a couple minutes ago about the filters and I didn't have that information readily available to me. Only our purchasing department has the actual K&N part numbers and I'll look into it for you and let you know.

[Chuck33079]

Thanks, man. You've got two on the website and the prices are fairly different.

[Mike@GTM]

Originally Posted by Chuck33079

Thanks, man. You've got two on the website and the prices are fairly different.

wind.zero has the correct part number. Unfortunately, we cannot compete with online retailers like Summit since they buy in much larger volumes than we do. At least, now you know which ones they are so you can shop around.

[wind.zero]

Originally Posted by Mike@GTM

Unfortunately, we cannot compete with online retailers like Summit since they buy in much larger volumes than we do. At least, now you know which ones they are so you can shop around.

Mike

I got my spare filters from GTM and my replacement serpentine belt. Given your proximity to Texas, the turnaround time was great. The price was little high but that is the business. I did choose other sources for a spare belt to keep on hand.

Thanks for supporting the community.

[Chuck33079]

Thanks, Mike. Does your Stage 1 kit use the 2.5 or 3" inlet? It looks like 3", but it never hurts to double check.

[elperuano]

Is the stage 2 tt kit the same?

[Mike@GTM]

Originally Posted by Chuck33079

Thanks, Mike. Does your Stage 1 kit use the 2.5 or 3" inlet? It looks like 3", but it never hurts to double check.

Originally Posted by elperuano

Is the stage 2 tt kit the same?

All of our Supercharger and Twin Turbo Kits (with a few exceptions) use the 2.5" filters.

The exceptions being our Stage 1.5 and Stage 2 Supercharger kit and our 350Z HR Supercharger Kit.