Stillen Supercharger estimates???

1slow370 · 10-28-2009, 02:41 AM

well hell at least they didn't just say it didn't have enough room and send us packin

Kyle@STILLEN · 10-29-2009, 12:24 PM

Quote:

Originally Posted by NewYorkJon34

I'm guessing this "work of art" is going to cost us additional $$$

It depends on how you look at it. The intake manifold is necessary in order to complete the installation, so whether it was a work of art or just something slapped together that would "do the job" it was going to be a part of the kit no matter what. Our guys just spent some extra time in making it look really nice.

Silo · 10-29-2009, 12:31 PM

Kyle, can you confirm what supercharger type you are using? Screw or centrifugal?

kannibul · 10-29-2009, 12:31 PM

Quote:

Originally Posted by Kyle@STILLEN

It depends on how you look at it. The intake manifold is necessary in order to complete the installation, so whether it was a work of art or just something slapped together that would "do the job" it was going to be a part of the kit no matter what. Our guys just spent some extra time in making it look really nice.

So, any confirmation on the type and location of the blower?

RCZ · 10-29-2009, 02:46 PM

Quote:

Originally Posted by Silo

Kyle, can you confirm what supercharger type you are using? Screw or centrifugal?

Quote:

Originally Posted by kannibul

So, any confirmation on the type and location of the blower?

Are you guys twins? You just asked the same question...worded similarly....at the same minute...thats amazing.

And you joined the same month...

kannibul · 10-29-2009, 04:22 PM

Quote:

Originally Posted by RCZ

Are you guys twins? You just asked the same question...worded similarly....at the same minute...thats amazing.

And you joined the same month...

And I took German in highschool. I don't remember much of it...

Silo · 10-29-2009, 04:40 PM

Cheers lost twin on the other side of the ocean!

Now Kyle, give us twins and the other folks some info please...

Kyle@STILLEN · 10-29-2009, 04:58 PM

Sorry guys,

We don't like to give out much information until we are 100% ready to launch the product. There are many reasons for this but here are some of the primary reasons.

1) Things change...Right now we're in the prototype stages and very few parts are 100% locked down. We have a solid foundation and we feel like we are going in the right direction but if we find that something needs to be changed during our testing then there was no point in even talking about it to begin with. If we start saying what we're using and something changes then it only confuses the people who are late to the discussion. We have all seen threads (especially 12 page long threads

) where information gets lost or confused or misinterpreted later in the thread.

2) Protection...We are very proud of our engineering and we have had numerous people rip off our designs. We like to keep our investments and our engineering in house rather than give it to the world before we bring it to market.

6MT · 10-29-2009, 05:04 PM

Quote:

Originally Posted by Kyle@STILLEN

Sorry guys,

We don't like to give out much information until we are 100% ready to launch the product. There are many reasons for this but here are some of the primary reasons.

1) Things change...Right now we're in the prototype stages and very few parts are 100% locked down. We have a solid foundation and we feel like we are going in the right direction but if we find that something needs to be changed during our testing then there was no point in even talking about it to begin with. If we start saying what we're using and something changes then it only confuses the people who are late to the discussion. We have all seen threads (especially 12 page long threads

) where information gets lost or confused or misinterpreted later in the thread.

2) Protection...We are very proud of our engineering and we have had numerous people rip off our designs. We like to keep our investments and our engineering in house rather than give it to the world before we bring it to market.

Silo · 10-29-2009, 05:47 PM

Kyle, how are the chances that the STILLEN 370Z supercharger will be downward compatible (or adopted) to the VQ35HR engine?

Kyle@STILLEN · 10-29-2009, 07:49 PM

We are definitely keeping the 07-08 350's in mind when we develop this kit and we are hoping that it will be compatible but at this time I have absolutely no information on whether or not it fits. All I know is that our engineer's are keeping it in mind but I personally have not seen anything.

LiquidZ · 10-29-2009, 07:55 PM

I really need to find something else to follow on these forums. This wait is killing me.

Kyle@STILLEN · 10-29-2009, 07:57 PM

Quote:

Originally Posted by LiquidZ

I really need to find something else to follow on these forums. This wait is killing me.

Perhaps the Penske Coil over discussion?

Or the discussion on our front lip/splitter?

LOL!

Go to the men's adult section...That should keep you occupied for a little while!

LiquidZ · 10-29-2009, 08:09 PM

Quote:

Originally Posted by Kyle@STILLEN

Perhaps the Penske Coil over discussion?

Or the discussion on our front lip/splitter?

LOL!

Go to the men's adult section...That should keep you occupied for a little while!

Can you discuss horsepower goals and/or stages?

1slow370 · 10-30-2009, 07:53 AM

They can't discuss anything because they don't work like GTM. We should all stop asking questions and instead go back to doing what we were and ramble for pages about what we want the kit to do. Ecu tune, screw compressor, ease of install/maintenance (this had better be easier than installing those god damn headers, and i better not need the torch to make it fit right). Also a plus would be making the inter cooler area of the manifold come apart so that at a future time a larger and more efficient core could be installed with a higher hood. Or the ability to pour ice in the water system (big reservoir with large lid). Or get crazy and add meth injection to the stage 4 kit. I know you won't do most of that but hey throws some ideas on the table.

10-28-2009, 02:41 AM	#181 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	well hell at least they didn't just say it didn't have enough room and send us packin Last edited by 1slow370; 10-28-2009 at 10:29 PM.

10-29-2009, 07:55 PM	#192 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	I really need to find something else to follow on these forums. This wait is killing me. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 01:56 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM

10-29-2009, 12:31 PM	#183 (permalink)
Silo Base Member Join Date: Jun 2009 Location: Germany Age: 50 Posts: 38 Drives: 370Z Rep Power: 16	Kyle, can you confirm what supercharger type you are using? Screw or centrifugal?

10-29-2009, 04:40 PM	#187 (permalink)
Silo Base Member Join Date: Jun 2009 Location: Germany Age: 50 Posts: 38 Drives: 370Z Rep Power: 16	Cheers lost twin on the other side of the ocean! Now Kyle, give us twins and the other folks some info please...

10-29-2009, 04:58 PM	#188 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	Sorry guys, We don't like to give out much information until we are 100% ready to launch the product. There are many reasons for this but here are some of the primary reasons. 1) Things change...Right now we're in the prototype stages and very few parts are 100% locked down. We have a solid foundation and we feel like we are going in the right direction but if we find that something needs to be changed during our testing then there was no point in even talking about it to begin with. If we start saying what we're using and something changes then it only confuses the people who are late to the discussion. We have all seen threads (especially 12 page long threads ) where information gets lost or confused or misinterpreted later in the thread. 2) Protection...We are very proud of our engineering and we have had numerous people rip off our designs. We like to keep our investments and our engineering in house rather than give it to the world before we bring it to market.

10-29-2009, 05:47 PM	#190 (permalink)
Silo Base Member Join Date: Jun 2009 Location: Germany Age: 50 Posts: 38 Drives: 370Z Rep Power: 16	Kyle, how are the chances that the STILLEN 370Z supercharger will be downward compatible (or adopted) to the VQ35HR engine?

10-29-2009, 07:49 PM	#191 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	We are definitely keeping the 07-08 350's in mind when we develop this kit and we are hoping that it will be compatible but at this time I have absolutely no information on whether or not it fits. All I know is that our engineer's are keeping it in mind but I personally have not seen anything.

10-30-2009, 07:53 AM	#195 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	They can't discuss anything because they don't work like GTM. We should all stop asking questions and instead go back to doing what we were and ramble for pages about what we want the kit to do. Ecu tune, screw compressor, ease of install/maintenance (this had better be easier than installing those god damn headers, and i better not need the torch to make it fit right). Also a plus would be making the inter cooler area of the manifold come apart so that at a future time a larger and more efficient core could be installed with a higher hood. Or the ability to pour ice in the water system (big reservoir with large lid). Or get crazy and add meth injection to the stage 4 kit. I know you won't do most of that but hey throws some ideas on the table.