Stillen Supercharger estimates???

Zsteve · 09-27-2009, 05:27 PM

sounds good I will have to read up on the GTM one and if Stillen can keep the hood lines then that might be so bad. I really do like the hood and roof lines as they add character to the car.

Minicobra1 · 09-28-2009, 04:36 AM

Quote:

Originally Posted by Throttle

Z Steve,
A roots style will probably require some type of hood modification for clearance. STILLEN will most likey be using a roots sytle similar to what they used on the 350Z. That was an Eaton M62, hopefully they are using a new Eaton TVS style R1320 or an R1900 for the 370Z.

A centrifugal style won't require any hood modification. However, due to the dual side intake, a centrifugal style requires a little more hardware than you might think. GTM has a SC kit like this for the 370Z already. You may also want to check the thread about the Vortec SC as well.

~Throttle

I picked my car up from Vortech on Friday, (they had it for over a week doing R&D) looks like they abandoned the idea of going centrifugal due to lack of space under the hood. :-(
They did mention the possibility of a twin screw mount, since they build them for other platforms. Only issue is the hood will have to be changed or modified. I'll be in touch with them about dropping the car off for the twin screw if/when they decide to move forward on it.

LiquidZ · 09-28-2009, 07:41 AM

Quote:

Originally Posted by Minicobra1

I picked my car up from Vortech on Friday, (they had it for over a week doing R&D) looks like they abandoned the idea of going centrifugal due to lack of space under the hood. :-(
They did mention the possibility of a twin screw mount, since they build them for other platforms. Only issue is the hood will have to be changed or modified. I'll be in touch with them about dropping the car off for the twin screw if/when they decide to move forward on it.

Keep pushing them to do it!

Buddy Revell · 09-28-2009, 09:00 AM

Quote:

Originally Posted by Minicobra1

I picked my car up from Vortech on Friday, (they had it for over a week doing R&D) looks like they abandoned the idea of going centrifugal due to lack of space under the hood. :-(
They did mention the possibility of a twin screw mount, since they build them for other platforms. Only issue is the hood will have to be changed or modified. I'll be in touch with them about dropping the car off for the twin screw if/when they decide to move forward on it.

Thanks for all the info, Minicobra. Does Vortech want to know if 370Z owners would be willing to get a different hood like with the Stillen 350Z supercharger? Perhaps another poll is in order.

jmlenz · 09-28-2009, 08:29 PM

wasnt this a stillen supercharger thread? havnt looked in this thread in a while but it appears Stillen is still not giving anything up huh?

Buddy Revell · 09-28-2009, 10:42 PM

Quote:

Originally Posted by jmlenz

wasnt this a stillen supercharger thread? havnt looked in this thread in a while but it appears Stillen is still not giving anything up huh?

Looks like Stillen's going for a different approach than GTM and keeping it hush hush, I guess.

RCZ · 09-29-2009, 10:31 AM

They don't want to release and hype up their stuff until it is completely finished and well tested. Its a different approach, thats all. It will be done when its done and I'm sure they are eager to get the kit out to us. Be patient, they will let us know as soon as its done and ready. Lots of research and planning going into this kit and they have their resources behind it. Be patient folks, its on its way.

kannibul · 09-29-2009, 11:22 AM

Quote:

Originally Posted by RCZ

They don't want to release and hype up their stuff until it is completely finished and well tested. Its a different approach, thats all. It will be done when its done and I'm sure they are eager to get the kit out to us. Be patient, they will let us know as soon as its done and ready. Lots of research and planning going into this kit and they have their resources behind it. Be patient folks, its on its way.

+1...

I think Stillen got burned with the 350Z in releasing the kit first?

Either way, I think it's amazing that we have a couple of manufacturers on this forum that are contributing to various forms of forced induction.

GTM with their turbo kit...very appealing to jump on it now and have something no one else has, but, patience can sometimes be a good thing...

RCZ · 09-29-2009, 01:27 PM

umm people already have the TT kit installed and running. I think Sebastian from palm beach had his first.

kannibul · 09-29-2009, 01:32 PM

Quote:

Originally Posted by RCZ

umm people already have the TT kit installed and running. I think Sebastian from palm beach had his first.

Sorry, I was speaking from a local(ish) standpoint...and being the (or among the) first is cool because you're breaking the ice for others to follow, but, you're also the first to have issues.

ColeJJones · 09-29-2009, 10:54 PM

if this supercharger is using eatons TVS.... i will buy asap

Buddy Revell · 09-29-2009, 11:30 PM

Different approaches, but props to both Stillen and GTM for developing forced induction options for the VQ37. Same with Greddy.

Kyle@STILLEN · 10-22-2009, 01:36 PM

Just thought I'd jump in here and offer a little update.

I was walking through the shop last week and I saw an interesting site. The supercharger development car was running! The hood was closed! and I could see our engineers inside with their laptops! That's right folks, our supercharger is nearing completion! Shouldn't be much longer now!

Oh and for the record, we are working with a very reputable electronic tuning company to do all of our tuning directly through the ECU. No more piggyback? Could be!

LiquidZ · 10-22-2009, 01:44 PM

Quote:

Originally Posted by Kyle@STILLEN

Just thought I'd jump in here and offer a little update.

I was walking through the shop last week and I saw an interesting site. The supercharger development car was running! The hood was closed! and I could see our engineers inside with their laptops! That's right folks, our supercharger is nearing completion! Shouldn't be much longer now!

Oh and for the record, we are working with a very reputable electronic tuning company to do all of our tuning directly through the ECU. No more piggyback? Could be!

Moaaarrrr!!

Thanks for the update. Hopefully more are on the way soon.

FuszNissan · 10-22-2009, 01:45 PM

NIce, sounds great that the hood was closed....hummm. Does that mean you don't have to purchase another hood?

10-22-2009, 01:45 PM	#150 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	NIce, sounds great that the hood was closed....hummm. Does that mean you don't have to purchase another hood? __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 01:56 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM

09-27-2009, 05:27 PM	#136 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	sounds good I will have to read up on the GTM one and if Stillen can keep the hood lines then that might be so bad. I really do like the hood and roof lines as they add character to the car.

09-28-2009, 08:29 PM	#140 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	wasnt this a stillen supercharger thread? havnt looked in this thread in a while but it appears Stillen is still not giving anything up huh?

09-29-2009, 10:31 AM	#142 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	They don't want to release and hype up their stuff until it is completely finished and well tested. Its a different approach, thats all. It will be done when its done and I'm sure they are eager to get the kit out to us. Be patient, they will let us know as soon as its done and ready. Lots of research and planning going into this kit and they have their resources behind it. Be patient folks, its on its way.

09-29-2009, 01:27 PM	#144 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	umm people already have the TT kit installed and running. I think Sebastian from palm beach had his first.

09-29-2009, 10:54 PM	#146 (permalink)
ColeJJones Base Member Join Date: Aug 2009 Location: Vista, CA Posts: 13 Drives: 06 cobalt SS/SC Rep Power: 16	if this supercharger is using eatons TVS.... i will buy asap

09-29-2009, 11:30 PM	#147 (permalink)
Buddy Revell Enthusiast Member Join Date: Mar 2009 Location: So Cal Posts: 303 Drives: 08 Infiniti G37 Rep Power: 16	Different approaches, but props to both Stillen and GTM for developing forced induction options for the VQ37. Same with Greddy.

10-22-2009, 01:36 PM	#148 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	Just thought I'd jump in here and offer a little update. I was walking through the shop last week and I saw an interesting site. The supercharger development car was running! The hood was closed! and I could see our engineers inside with their laptops! That's right folks, our supercharger is nearing completion! Shouldn't be much longer now! Oh and for the record, we are working with a very reputable electronic tuning company to do all of our tuning directly through the ECU. No more piggyback? Could be!