STS Remote Turbo Kit 370Z @ AkumaMotorsports

tower74 · 04-22-2013, 10:05 PM

You guys didn't keep the clamps that come originally with the kit? We switched them out for the V-clamps and resolved the exhaust leaks. Please tell me he has a oil filter relocation kit. That turns into a bear when it comes time to change the oil with out one. Well at least on the AT7.

Nism0 · 04-22-2013, 10:29 PM

Quote:

Originally Posted by tower74

Trust me I'm trying to hate on you. Just warning you of what to look, coming from the 2nd STS system installed on a Z, for with this kit. Word of advice, get some resonated test pipes and put another resonator in line. With the test pipes you will see a lot better numbers since your cats restrict air flow to the turbo.

My headshaking was not directed toward you in anyway lol. It's a small intercooler due to it being a rear mount turbo. And I've seen the same size intercooler on my buddies vortech supercharged 350z. But ANYWAYS.....

I did in fact buy STS resonators that have to be installed into the y-pipe. I don't mind how loud it is, but it's a lot too raspy for my taste.

Quote:

Originally Posted by tower74

Just make sure the 2 pipes on the cold side of the inner cooler are coated. Those were the 2 pipes that rusted like a mofo on my kit. I know the methanol had a lot to do with it but hey better safe than sorry. @Nism0...check your filter often. I forgot and under heavy boost I crushed my filter from it trying to suck in air. Good luck and you've got to beat 481whp and 427wtq on an AT7.

........ un tuned.

I bought a new filter in place of the one that was sent with the kit. I need to buy a filter sock, but will regularly check it to make sure it's always clean. I am hoping for around 480whp and 400wtq, but only the dyno will tell... tomorrow hopefully.

Quote:

Originally Posted by tower74

You guys didn't keep the clamps that come originally with the kit? We switched them out for the V-clamps and resolved the exhaust leaks. Please tell me he has a oil filter relocation kit. That turns into a bear when it comes time to change the oil with out one. Well at least on the AT7.

I installed the kit myself, with the help of a friend. My friend and I were able to move the pipe enough to get the oil filter on/off with no issues. If I ever add an oil cooler I will with-out-a-doubt need an oil filter relocation kit. I was going to get different clamps for the exhaust. I will triple check for leaks again but last time I checked I did not have any.

Question for you tower.

The only thing I dislike is the oil pump. It's really loud and I do not have the self tapping screws over tightened. I know the instructions specifically mentioned over tightening those screws could transfer unwanted noise from the oil pump into the cabin. Was your oil pump extremely noisy? If so what did you do to solve the issue?

I thank you for your input. It has been helpful. I really have not been in contact with STS except to order their resonators and Mark seemed like a good guy. My friend and I were able to figure out everything on our own.

I had the guys at AKUMA do a once over on my car and they were able to correct a few of MY mistakes. These guys are awesome! And have been extremely helpful in this tuning process. They have treated me with the up-most respect and are all very knowledgeable in this field. I am very happy I found AKUMA Motorsports and highly recommend them.

Hopefully I will see you all tomorrow with some decent dyno numbers!

tower74 · 04-22-2013, 10:46 PM

I really only heard it when the car was cold or after a nice run. After a while you kinda get used to the noise. After the test pipes went in I really didn't hear anything but a loud growl. Worst case you guys should contact STS and when it asks go to dial by name and talk with MARC. It's the only one. He will be able to help you with the tune if you run into any problems.

tower74 · 04-22-2013, 10:55 PM

Hell if I wasn't on the road right now I would send you my tunes from STS. All they would have to do is change the ECU numbers. It would be a good start. The last run I did was by far the cleanest AFR numbers I was getting. I was usually down in the 9's and 10's.

AkumaMS · 04-23-2013, 10:45 AM

Tower, if you can do that that would be great as well. Appreciate all the kind words and we are here to help and better the forum and community.

thanks all
-Dave

tower74 · 04-23-2013, 11:10 AM

Quote:

Originally Posted by AkumaMS

Tower, if you can do that that would be great as well. Appreciate all the kind words and we are here to help and better the forum and community.

thanks all
-Dave

PM me your email address and when I get home, either late tonight or early afternoon tomorrow I will locate those files and get them to you guys ASAP.

AkumaMS · 04-23-2013, 12:12 PM

Done, thanks tower, sent.

blackonorange · 04-23-2013, 09:23 PM

Numbers???

AkumaMS · 04-23-2013, 09:42 PM

Not yet, we actually have a problem with the exhaust piping hitting the dyno when strapped down. Weather was not nice at all here today so even road tuning was not possible. The client has Ark lowering springs on the vehicle.

blackonorange · 04-23-2013, 09:56 PM

That's weird , my car is slammed like stupid low. What kind of Dyno is it?

AkumaMS · 04-23-2013, 10:43 PM

Mustang AWD 500 Dyno, the IC piping is rubbing.

Nixlimited · 04-23-2013, 10:55 PM

Quote:

Originally Posted by AkumaMS

Mustang AWD 500 Dyno, the IC piping is rubbing.

That seems like some really wonky piping.

elperuano · 04-23-2013, 11:09 PM

I'm slammed as well, never had a problem gettin on the rollers

Nism0 · 04-24-2013, 01:07 PM

Quote:

Originally Posted by tower74

Hell if I wasn't on the road right now I would send you my tunes from STS. All they would have to do is change the ECU numbers. It would be a good start. The last run I did was by far the cleanest AFR numbers I was getting. I was usually down in the 9's and 10's.

Thanks for that! I'm hoping to pick the car up today!

tower74 · 04-24-2013, 04:01 PM

Ok Dave.... I just sent all the tunes they had sent me.

Please please please do not try to load these tunes onto his car. The ECU numbers will not match and it will screw up his car.
There should be one on there that gave me the 481hp....I think it was the 3-7-12 zipped file. Hope this helps you guys at least get a running start.

04-23-2013, 10:45 AM	#20 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	Tower, if you can do that that would be great as well. Appreciate all the kind words and we are here to help and better the forum and community. thanks all -Dave Dzel likes this. __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

04-23-2013, 12:12 PM	#22 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	Done, thanks tower, sent. __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

04-23-2013, 09:42 PM	#24 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	Not yet, we actually have a problem with the exhaust piping hitting the dyno when strapped down. Weather was not nice at all here today so even road tuning was not possible. The client has Ark lowering springs on the vehicle. __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

04-23-2013, 10:43 PM	#26 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	Mustang AWD 500 Dyno, the IC piping is rubbing. __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

04-24-2013, 04:01 PM	#30 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 370	Ok Dave.... I just sent all the tunes they had sent me. Please please please do not try to load these tunes onto his car. The ECU numbers will not match and it will screw up his car. There should be one on there that gave me the 481hp....I think it was the 3-7-12 zipped file. Hope this helps you guys at least get a running start. Dzel likes this. Last edited by tower74; 04-24-2013 at 05:57 PM.

04-22-2013, 10:05 PM	#16 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 370	You guys didn't keep the clamps that come originally with the kit? We switched them out for the V-clamps and resolved the exhaust leaks. Please tell me he has a oil filter relocation kit. That turns into a bear when it comes time to change the oil with out one. Well at least on the AT7.

04-22-2013, 10:46 PM	#18 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 370	I really only heard it when the car was cold or after a nice run. After a while you kinda get used to the noise. After the test pipes went in I really didn't hear anything but a loud growl. Worst case you guys should contact STS and when it asks go to dial by name and talk with MARC. It's the only one. He will be able to help you with the tune if you run into any problems.

04-22-2013, 10:55 PM	#19 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 370	Hell if I wasn't on the road right now I would send you my tunes from STS. All they would have to do is change the ECU numbers. It would be a good start. The last run I did was by far the cleanest AFR numbers I was getting. I was usually down in the 9's and 10's.

04-23-2013, 09:23 PM	#23 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	Numbers???

04-23-2013, 09:56 PM	#25 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	That's weird , my car is slammed like stupid low. What kind of Dyno is it?

04-23-2013, 11:09 PM	#28 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	I'm slammed as well, never had a problem gettin on the rollers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
Remote start	KERMIT	Nissan 370Z General Discussions	17	03-14-2013 11:53 PM
remote start for Z	kidkotic2001	Nissan 370Z General Discussions	33	01-15-2013 09:55 PM
Key fob/remote	supunna_picta	Nissan 370Z General Discussions	5	04-04-2011 11:56 AM
What is Remote Windows Down	OldGuy	Nissan 370Z General Discussions	27	02-14-2010 05:37 PM