Boosted Performance round 2 list

GaleForce · 05-12-2014, 10:39 PM

Quote:

Originally Posted by Joepro

Thought it was 102...I did remember! Ty gale.

I just bought one two days ago... That and I have a picture of the original oil filter box saved on my phone. My phone is my memory, I just have to remember what's saved on it.

Quote:

Originally Posted by jwick

Gale. It's the same filter for the GReddy relocation thermostat plate too.

I assumed it would be the same. Thanks for verifying.

TopgunZ · 05-13-2014, 11:36 AM

I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno.

Anybody have any ideas how this might have came about or what can be causing this?

zguynate · 05-13-2014, 04:47 PM

Quote:

Originally Posted by TopgunZ

I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno.

Anybody have any ideas how this might have came about or what can be causing this?

I had the same thing that happened. Check on the drivers side by the left wastegate. There is a stud that holds a heat shield on that came in contact with my wastegate clamp. I trimmed it with a Dremel and had no issues since. It was very noticeable on the pedal for some reason.

jwick · 05-13-2014, 05:16 PM

Quote:

Originally Posted by dragonbreath

I had the same thing that happened. Check on the drivers side by the left wastegate. There is a stud that holds a heat shield on that came in contact with my wastegate clamp. I trimmed it with a Dremel and had no issues since. It was very noticeable on the pedal for some reason.

I think we cut that one too as I remember Chuck (can you confirm?) cutting the one by the turbo and another as I was messing with the turbo coupler.

TopgunZ · 05-13-2014, 05:27 PM

Quote:

Originally Posted by dragonbreath

I had the same thing that happened. Check on the drivers side by the left wastegate. There is a stud that holds a heat shield on that came in contact with my wastegate clamp. I trimmed it with a Dremel and had no issues since. It was very noticeable on the pedal for some reason.

Quote:

Originally Posted by jwick

I think we cut that one too as I remember Chuck (can you confirm?) cutting the one by the turbo and another as I was messing with the turbo coupler.

Well then...this is where Ill start.

Thanks guys!

05-13-2014, 11:36 AM	#2 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno. Anybody have any ideas how this might have came about or what can be causing this? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM